Tag Archives: Conan

Mythic Legions Ogre Scale Accessory Pack

by

1

I picked up the Ogre Accessory Set on the same day I ordered a Cosmic Legion (Review next week). It was on sale at Store Horsemen and at $20 I thought this might be a good way to put some more life into my ogre scale figure and even make SSKUR’GE even more like Whiplash from Masters of the Universe…well let’s see how that worked out.

But first you should read my review of Balthor the Tower Ogre, which I purchased loose, and then my review of SSKUR’GE.

PACKAGING

The Mythic Legions Ogre Scale Accessory Pack came in this flat window box, not unlike the Mythic Legions Magic Effects came in. You can see most of the contents very well. I say “most” because the hammerhead is hidden behind the title card.

The back features some artwork of a castle in a volcanic setting surrounded by ogre scale characters. The featured character appears similar to what Balthor the Tower Ogre should look like armed with most of the kit. You can also see a cyclops, which I have seen at the Toy Federation in Greer, SC, and some other big guy. Two or three smaller guys look up from below in fear. It’s a good illustration. The side of the box has some pictures…one is the title and the other features other characters from Mythic Legions, with that bear symbol being a faction. (something like “the noble bear.”

But most impressive is the backing liner of the packaging. We get the same castle from above, but without figures. So anytime I could use a fantasy lava scene or need a quick castle to photograph, the Four Horsemen provided that as a nice bonus to this product.

WHAT IS IN THE BOX?

As you continue to open it, you see it has a blister with a rectangular blank cap on top.

From left to right clockwise you get

  • Antlers
  • Weapons strap
  • Shield with an evil face
  • Double ox-headed hammerhead
  • Tusks for the shield
  • Alternate Viking horns
  • Diamond-spiked shoulder pauldrons
  • Bearded head
  • Hammer Handle

Now, this seems like a longer list than it should be. The tusks are supposed to always be on the shield, and the hammerhead should be on the handle always.

The hammerhead…OK I had seen pictures online, but I didn’t really realize what it was until I had it in hand. I thought it was just some kind of furry thing or giant blocks with moss hanging off or something. Nope. MOO. Gruesome MOO. And there is something evil about this too. It almost seems to be an altar of some kind. It has the ball joint so that other standard size heads can fit on the top of it, reinforcing my point.

SO HOW IS IT?

Here is Balthor with the alternate head and antlers, wielding the hammer. I can’t for the life of me get those paudrons on him properly. The antler gets in the way, or the armor straps get in the way.

The Antlers are very impressive! These are “moose” type of antlers, and were a big draw to me getting this set.

PICTURED: Balthor the Tower Ogre armed with the Mythic Legions Ogre Scale Accessory Pack. He is holding MASTERVERSE Revolution Sorceress Teela.

I decided to try something different. Let’s remove the Balthor armor and replace it with the weapons strap. Then put the pauldrons on. So we have another problem then. The pegs that are supposed to go into the holes on his back are too big. I mean…that’s just it. I can barely get them in. The way I accomplished this photo was: Head off first. Remove armor second. Put on strap third. JAM THOSE PALDRONS AS HARD AS I COULD fourth. Get the hammer in the strap fifth. Put pauldron that fell off sixth. Loosely put head on last.

He was standing OK, so I thought I would see how far I could take it with a classic barbarian-holding-woman trope. I seriously thought it would tip over when I put that piece of dress on his left hand.

The Pauldrons are very heavy, and hammer is also very heavy.

So what about SKKUR’GE?

If you remember, SKURR’GE had some plugs on his back covering some holes to add wings, etc. I took those out, but the recesses are too deep for the pauldrons to fit properly. Too bad, because he looks awesome with them on. (They are just sitting loose.)

The shield is another matter. The handle is just like the other Mythic Legions shields we have. It has a handle that fits in the figure’s gripping hand. This handle pegs on the back of the shield, and here is the first problem. It is very loose. It always wants to let go. And the tusks…the left side doesn’t want to stay on. (You can see in the illustration on the box that the tusks are supposed to face outwards.) I think this shield is the goofiest thing. That face…it’s kind of “doopid.” And honestly was one of the reasons I never purchased this until it was marked down.

As for the weight of all this, SSKUR’GE already is a very heavy boy. His tail takes a lot of burden off of the leg joints. Adding this stuff starts to tip the balance forward from where it needs to be.

WHO WINS? I think Balthor swings the hammer down but it is met with the shield. Whiplash slides the shield up and presses forwards with the tusks, knocking Balthor back. In the same motion his tail crushes in on his bare arm.

I find that the tusks work better if you reverse them, which looks fine, actually even if it wasn’t the intended way.

THE MOST CHALLENGING THING

PICTURED: Balthor the Tower Ogre armed with the Mythic Legions Ogre Accessory Pack and a kit bash Conan made of Masters of the Universe Classics Vikor body, Battle of the Mounds Conan neutral head, MOTUC Vykron axe, and a Mythic Legions silver spear.

The picture shown here took forever to accomplish. Balthor kept falling over. The hammer is so heavy and his wrist joints are loose. (This is an old figure…well cared for but also worn). That head is barely on and necessarily turned to accommodate the pauldrons. Only one pauldron would work, and notice I used the more boring Viking horns. The shield kept falling apart, either off of the handle or the tusks would fall. And remember, stuff falling off or weight shifting pretty much caused the figure to fall over. I posed Balthor armed with as much of the accessory pack as I could for about twenty minutes. I got him where I wanted him, and then set Conan up there, and this element caused him to fall over AGAIN!

SPARTANNERD’S RATING OF THE MYTHIC LEGIONS OGRE SCALE ACCESSORY KIT

Mythic Legions is solid stuff. Really…the figures all have heft to them. And the modularity of them, where parts can be swapped in scale just adds a whole other element. And that this is a generic kind of story…it goes great for any fantasy property. Pair it with Cosmic Legions and you can have that sword-and-sorcery-sci-fi world complimentary to Masters of the Universe.

I’m saying all of this glowing stuff because the weaknesses of the Ogre Scale Accessory Pack take some of the joy out out it. You don’t want to spend fifteen minutes arming a figure and then it being too heavy to support your work. You don’t want your display, set up awesomely in your nerd closet to be knocked over because your Balthor or SSKUR’GE figure couldn’t bear the weight of its armor and balance at the same time. It shouldn’t take thirty minutes to get a photo.

The moose antlers are cool. It is good to have some alternate Viking horns. That hammer is gruesome, and I don’t know if that is a good thing. The pauldrons would be awesome if the pegs would fit in the holes. The armor strap is versatile and can be used in lots of other places with other figures. The shield…(face palm). No really FACE PALM. I really like the bearded head, but I wish it had eyes painted in. (My same complaint with Balthor’s original head…it looks like Batman). The backdrop was a very enjoyable bonus.

I am awarding this set a 2/5. I bought this on some type of clearance sale at storehorsemen for $20, making this just about the least expensive item in Mythic Legions. And I see why, now that I have it. I will use it…in fact the pauldrons really do it for me in displaying SSKUR’GE. They do make him look even more like Whiplash, and that was enough for my $20.

Do you agree or disagree, Hub City Geeks? Let me know in the comments!

Conan Battle of the Mounds

by

9

Another one of those orders that took SO LONG. I ordered the Super7 Ultimates! Conan Battle of the Mounds set in March of 2023. And I received it right at the beginning of August 2024

And now it is the last day of September. It has taken me so long because so much drama in life. And we can cap that off with a Hurricane Helene. Regardless I am blessed. Read my review to escape the gloom and doom. (But not the Thulsa Doom.)

There are four figures in all: Conan, Subotai, Valeria (Spirit), and Thulsa Doom.

PACKAGING

You can see a review of the packaging if you click this link.

The front packaging is a nice window box where you can see every figure. There is no slip cover with these, which is different from the others that I have. There is a little bio on the back.

So we didn’t get more torches as a background…instead this bonfire behind each figure. At first glance I thought this was strictly worse. Imagine lining up those torches in a row to create a “hallway.” But actually this bonfire can be pretty useful…I have already found some creative ways to use it. So … Cool!

PICTURED: Mythic Legions Gold Knight Legion Builder (Review coming soon,) Sir Godfrey, and Cosmic Legions SSKUR’GE. This little scene is made of different packaging pieces…the fire adds some chaos. I’ll use these figures again later in the review.

I have taken some spicy pics, but for this review I am using very basic props, so you can have a fair look. In some of my prettier pictures, I am using the alternate “bloody” weapons from the exclusive super pack that you received when you ordered all of these as a set.

CONAN

First, Conan. Here is the figure with all you get in the box.

Conan comes with:

  • Conan figure
  • Scabbard for Atlantean Sword
  • Atlantean Sword
  • Battle Axe, as seen in the movie
  • Alternate, unhelmeted, neutral head sculpt.
  • Alternate hands..gripping and open.
  • Eye of the Serpent necklace

I have King Conan to compare him to. This is a classic, less costumed design as it was of the 20-something year old Arnold Schwarzenegger with his natural face. And it does indeed capture the likeness. As presented, they are two different characters. Obviously the king is old, wise, grizzled, and wizened. This is youthful arena champion-turned adventurer Conan. He is out for revenge against the cult of Set.

PICTURED: Super7 Ulimates! King Conan with Throne of Acquilonia, Super7 Ultimates! Battle of the Mounds Conan, and Masters of the Universe Classics Vikor with the alternate Battle of the Mounds head. All three are armed with a different version of The Atlantean Sword.

There is a little problem with the armor…See that button on the right shoulder? That is a rubber plug that connects the shoulder pauldron to the tunic. It might have supposed to have been glued…unsure. But it comes out, and it is difficult to get it to stay in. I’ve had to use the hairdryer.

PICTURED: Super7 Ultimates Battle of the Mounds Conan with bloodied axe, and Super7 Ultimates! “Timber” from Snake Eyes. You can see that berserker Conan here has a hole in his armor where that pauldron plugs in. In the movie, a pack of wolves attack him. Next scene, he has fur all over his armor…

The berserker/maurauder head is insane, but I prefer the more relaxed unhelmeted head.

All of the articulation is what you would expect, and furthermore if you could remove the armor, I am certain you would just have Masters of the Universe Classics Vikor’s torso buck underneath. The hair does hinder the head movement some.

Though the Atlantean Sword is huge in the movie, I believe this rendition with all of these figures is just too big to be an accurate recreation. You can see that there is better paint on this version than the version that came with the king. I haven’t had any paint chip off of the hilts in this set (yet)

THULSA DOOM

I am writing this just one week after James Earl Jones passed away. Sad stuff. He was a great actor…he contributed so much to everything he did, from Thulsa Doom to Mufasa to Darth Vader to The Sandlot. And in this movie he was a very terrifying villain if you like Conan the Barbarian at all. All of these worshippers…he had them completely hypnotized. And that he could change into a snake was a cool power. I know it was the 1980’s, but this was an underused power in the movie.

Here is what you get with Thulsa Doom:

  • Thulsa Doom figure with removable cape.
  • Alternate head sculpt capturing Thulsa’s awesome battle helmet
  • Twin daggers
  • The ceremonial snake “Fangs of the Serpent” Dagger
  • A bow with a snake arrow.
  • Alternate hands…fists and praying hands.

This sculpt looks just like James Earl Jones. Really, the likeness to the look of the character in the movie is remarkable. Just like Conan, you have identical articulation that is restricted by the head sculpt only. Very likely also Vikor’s buck with some armor sculped and glued over. This cape is an improvement on what we saw on King Conan. It has Velcro straps that reach around.

I think the helmeted head is over-the-top. I wish we had a curly snake. In the movie he takes the normal snake and stretches it into this arrow with the instructions “seek.” It becomes a homing arrow. Unfortunately, you can’t get him into a proper archery pose. Like most figures nowadays that have bows and arrows, he can’t properly “knock” the arrow. Check out the back of the cape.

The Fangs of the Serpent knife is very detailed and welcome, though I am uncertain he ever actually uses it in the movie. If I remember right, it is the king who hires them to save his daughter that has it.

SUBOTAI

If you ever read any Conan the Barbarian comics, he is usually paired with someone weaker but smarter. In this movie that is Subotai.

Here’s what Subotai comes with:

  • Subotai figure
  • Alternate head with a different expression
  • Spear
  • Short sword with a scabbard
  • Bow with arrow
  • Alternate hands with…wait for it…separations in the fingers so you can “attempt” a proper arrow pose.

This buck is different, and I looked to see who I have that might share it. I believe Ultimates! Snake Eyes from GI Joe has this same torso. It is smaller, skinnier as to be expected with no ab crunch.

Once again, this head sculpt looks like the actor and the character. (Gerry Lopez-he is also a professional surfer!)

Perhaps of the four, this is my least favorite. But it is good variety, and I wish I had the monk guy, and also Thorgrim, (this figure costs a ton at this point). And now an admission from the SpartanNerd. I got so frustrated trying to get Subotai into an arrow pose, I didn’t even try with Thulsa Doom. 😦

PICTURED: Super7 Ultimates! Battle of the Mouinds Conan and Subotai with MASTERVERSE New Eternia Snout Spout. There is a classic Robert E. Howard story, the Tower of the Elephant, or something like that. So here is a remix of that.

VALERIA (Spirit)

Valeria isn’t even named in the movie, only the credits. But she is truly the driver of this story about a slave who finds freedom. She has her own type of slavery to be free of.

This is the perfect portrait of Sandahl Bergman. I’m sure Arnold and the estate of James Earl Jones don’t need this NIL money so much, but I hope this figure bankrolls Sandahl and Gerry. Especially Sandahl, who was such an underused actress after this terrific performance. Enough glowing…get to it SpartanNerd! Of these four figures, Valeria is my favorite to photograph!

But we don’t get much with this figure. And readers of the blog know that this really bothers the SpartanNerd.

With Valeria we get…

  • A slender, curved sword, like she wields in her final scene.
  • Alternate hands. There are gripping and fists. (She came with princess wave hands displayed).

And that’s it. 😦

We could have got The Eye of the Serpent necklace that she and Conan stole. (But Conan from this same set came with that…)

We could have got…really all kinds of accessories. But we got just the basics. To be fair, this is what she used in the scene where she returns as a Valkyrie to save Conan, and this is what she was wearing.

So…some sort-of uncomfortable things to talk about…

To preserve her side hip profile, which is obviously a panty-less lady barbarian, there is a ”split” in the skirt piece on her leotard. This is left unpainted, but you can see the joint seams, and that isn’t very flattering.

(OK…she has silver-painted under there. I know someone was wondering. Reverend SpartanNerd condemns thee!) But on the side profile, what could be the most attractive curve on the figure…the way this breaks up the sculpt doesn’t do it for me.

The articulation is very good, and she can turn her head but you have to move her locks over. These shoulder pauldrons are glued on, and her straps are painted details. That she is chrome silver is very nice.

PICTURED: Super7 Ultimates Valeria (Spirit) and Mythic Legions Sir Godfrey. Both have brilliant chrome paint.

I think Sandahl is actually taller than this figure portrays. Probably to accommodate those ridiculous wings on top of the helmet (AWESOME!), they made the figure just a tad shorter. Below I am showing off the Masters of the Universe Classics Battleground Teela along with Valeria (Spirit,) and I think they have made her shorter. Wouldn’t this figure technically be the 5.0 MOTUC figure?

The Snake Dagger is perfect with the Teela, Warrior Goddess outfit.

Actually, I think they are the same basic body. So maybe not. Maybe just the MOTUC scale is actually too small to properly capture Sandahl’s height. (I am using the MASTERVERSE Revelation Teela’s alternate hair’s-down head, as I usually do. No, it doesn’t fit snugly)

BATTLE OF THE MOUNDS BLOODY WEAPONS SUPER PACK

Here’s what you get with this exclusive pack:

  • Conan Broken Father Sword
  • Conan Atlantean Sword (Bloody)
  • Subotai Spear (Bloody)
  • Subotai Arrow (Bloody)
  • Thulsa Doom Fangs of the Serpent Dagger (Bloody)
  • Subotai Sword (Bloody)
  • Valeria Sword (bloody)
  • Conan Axe (Bloody)
  • Conan Father Sword
Don’t these guys just look better armed with these weapons!

Conan’s father’s sword, along with the father’s half-sword he uses when he defeats Thulsa Doom at the end of the movie… I believe this is the only way to get these two weapons. Conan’s father’s sword is even bigger than the Atlantean sword.

PICTURED: Super7 Ultimates! Thulsa Doom armed with Conan’s Father Sword. he is on the MASTERVERSE New Eternia Bone Throne. If someone besides Skeletor would sit there, it would be Thulsa Doom or King Hiss.
SPOILER ALERT. This is how the movie ends.

SPARTANNERD’S RATING OF THE BATTLE OF THE MOUNDS SET

How should I even do this? As a set, it is a perfect 5/5…it leaves me wanting more, like Thorgrim and the monk guy. Isn’t there another barbarian thug on Thulsa’s team? I think so. I want those guys. As a set, 5/5.

Here is my rating of each part of the set.

Conan– 4/5. The armor strap button is a problem. You can see how loose it is even in these pictures.

Thulsa Doom– 5/5. James Earl Jones is honored very well with this figure.

Subotai– 4/5. even though he has that notched finger, it is still pretty hard to get him to pull off an archers pose.

Valeria (Spirit)– The sculpt and the paint carries this one. 5/5…my favorite to photograph. Though there are some unsightly seams on the hips and not many accessories.

Bloodied Weapons Super Pack– 5/5. How useful are these?! See above…the snake witches knife goes perfect with Teela in her cobra snake armor. As far as I know, we never had Conan’s father’s sword. The other weapons are the same that came with the other figures, but with blood. How can that be worse than plain?

So do you agree, or disagree, Hub City Geeks? This time Super7 didn’t ask me to apply for their affiliate program. Either way, these figures are excellent, and I highly recommend them if you like Conan the Barbarian or just barbarians in general.

Action Figure Showdown-MASTERVERSE Battle Armor He-Man (He-Men?)

by

2

I began comparing figures with one another way back with Demistros and Black Falcon. Then I did the three kings. And now, two versions of the same character. Or are they?

One of my thoughts was “It looks like Revolution version only has a single damage mark option, while the older New Eternia version has two. Oh I get it! They are encouraging you to buy both for interchangeable pieces.” Well, keep reading to see how that works out.

MASTERVERSE Revolution Battle Armor He-Man

PACKAGING

The packaging of this features terrific artwork. Once again, this newer “transformers” style packaging really works for me. You can see the figure inside, along with his main accessory. It’s a good drawing, but you can clearly see that the figure’s head sculpt has fatter jowels and smaller hair. Also featured on the cover are the Eternian Guards, who no doubt if they are ever released will have the same armor design. I almost predict this as a reveal at the SDCC this week. (Nope. Skelcons and Horde troopers!) Link to Pixel Dan video.

The back of the box features something I don’t like so much. This is a photoshopped picture of the action figure posed in an artwork setting. The shadow beasts ARE cool though.

We are treated to the “selfie cam” image. But also we can see the other ways of displaying He-Man with this set. We get a traditional harness and a no-scratch plate and a one-scratch plate. The cross sell on the bottom…I have all of these except for the Tri-Klops, which I deem pointless. We already have a MASTERVERSE revelation Tri-Klops that was pretty good. I have seen this one on the shelf, and the sculpting is more detailed and better all around. But it is still just Tri-Klops. Mekanek is excellent, and King Keldor is … OK.

There is some side-art

We get a picture of Andra. Now the story on the back and in the show is that Andra, as Man-At-Arms, designed this battle armor and gave it to He-Man for extra protection because he didn’t have the sword. (Gwildor and Orko were working on it).

About Andra…she is a fine character, and I get why they promoted her to importance. Lots of reasons. But she is a character that won’t sell. I am saying this because I have seen upwards of 30 of them on clearance between two different Target stores, one dedicated toy store, Wal-Mart, and Ollie’s. The bounty hunter looks really cool. But given a choice between Andra and someone more nostalgic, me and the vast majority of MOTU fans will choose even the worst vintage character over her. Maybe this is my two-cents, but evidence is evidence. She is regularly marked down on BigBadToyStore also. She’s not moving for under $13, which is likely what they paid for her wholesale.

Overall, this packaging really isn’t as good as some of the other more recent packaging, and I hope they don’t move to that photoshop design instead of the terrific art that is for instance on the back of Clawful’s packaging.

FIGURE

Here’s what you get in the box.

  • He-Man figure
  • Chrome battle axe
  • Two interchangeable chest plates
  • Alternate traditional battle harness with the “H” symbol
  • Two punching fists
  • Should I count the bracer? OK.

So how does it work?

The armor is of hard shell design. It goes together with clips on the side. You don’t have to remove the armor to swap chest plates. (An improvement over the MOTUC version.)

Here I have He-Man holding a triangular guitar pick. (Rhombo pick). This is what I use to pry the chest plate off. You could use any “spudger” to do this same thing.

The classic power harness looks great, but there is no loop on the back to store the axe or a sword. Well, there is no sword anyway. You can see that this is easily the best battle axe, and is a reason for purchasing this figure almost by itself. He changed into battle armor mode by fist-bumping his chest if I remember correctly. Unfortunately, his muscles are too big on the figure to do this.

Here are a couple of reenactment scenes from the Revolution show.

He-Man crowns Keldor the king. OOF.
King Keldor sent He-Man away to take the fight to Snake Mountain. He slyly mentioned to someone else when asked where his crown was…”I left it at home.” PICTURED: MASTERVERSE Revolution Battle Armor He-Man holding King Keldor’s crown, looking confused standing in front of MASTERVERSE New Eternia Skeletor’s throne. (Review coming soon!)
Because I don’t have Prince Adam, mid-transformation face-plant will have to do. OOF. PICTURED: MASTERVERSE Revolution Battle Armor He-Man and Masters of the Universe Classics Battle Cat, both without armor.

MASTERVERSE New Eternia Battle Armor He-Man

PACKAGING

New- Eternia Battle Armor He-Man came in the decidedly worse old-style MASTERVERSE packaging. But you can see everything clearly. And we are treated to the 40th anniversary symbol.

Now THIS IS COOL ARTWORK!

A very barbarian image of He-Man, this version with the obvious beard I haven’t mentioned yet, fighting a skeleton guy and some kind of orc. He stands over them, furry shorts and boots engaged, ready to mete vengeance with his battle axe! His right hand open about to grip for a powerful swing.

The cross sell oddly features a brown beard on He-Man. I never have needed a Sun-Man (another character that is shoved at us.) I just passed on Jitsu yesterday in Columbia, SC. And He-Ro…meh.

Side art…( the other side is just block letter title)

FIGURE

Here’s what you get….

  • Battle-Armor He-Man figure
  • Shoulder pauldron
  • Plate armor belt
  • Two armor plates, one undamaged, the other two- scratched
  • A right hand fist and open left hand
  • Power sword
  • Battle axe
  • Shield with vehicle detail
  • Boot strap knife

This is an impressive accessory list!

The head sculpt…he doesn’t look as grizzled as the artwork.

SO HOW DOES THIS GUY WORK? (SpartanNerd shaking his head)

Very unsightly. Why? Mattel, we can do better.

Where to begin. Before trying to remove the armor, it is already clear they sculpted and painted his belly. But he is slimmer than Revolution, but really you can’t display this figure without the armor.

To swap plates, you remove the front armor. The back is sculpted on and not removable. There are these holes in his chest, where pegs on the back of the plates go. Awkward, and stupid. There is some circuitry design….just. Why?

Also, the boot knife fits in an indention awkwardly. (This is a different boot knife than 1987 Movie He-Man came with.)

I removed the belt armor for this one. Like Mekanek, He-Man’s shield celebrates a vehicle we probably won’t get for MASTERVERSE. This time Dragon Walker I believe. You can store the sword behind the shield, but there is no scabbard or loop. The shield pegs into a hole just like on the wrist bracer. The pauldron goes on with a snapping loop.

So for me, it’s the head sculpt that is the only redeeming factor of the paint and sculpt. Where did the beard “come from”? Masters of the Universe Classics had a “King He-Man” figure, who was more wizened, and grizzled. That figure featured a beard. I have neglected the slight scratch of red paint on his face. BLOOD. (I own a copy of DC comics He-Man: The Eternity War #6 which features King He-Man on the cover.)

PICTURED: MASTERVERSE New Eternia Battle Armor He-Man on Super7 Utlimates! King Conan’s throne. He-Man is wearing MASTERVERSE Revolution King Keldor’s crown, and holding MASTERVERSE New Eternia Thunder-Punch He-Man’s sword. (It’s gold…more “kingly.”

I think Mattel might have been going for a Mythic Legions or a Christopher Helmsworth look as this bearded version seems younger and more spritely.

Here is a kind of re-make of the artwork on the back. It actually isn’t possible to one-for-one that artwork. He-Man came with opposite hands.

COMPARISON

Both of these figures have strengths and weaknesses. Revolution has a more modern design, while New Eternia was one of the earliest figures. Mattel has had time to improve. This has something to do with the cheap, cheap price I was able to pay for New Eternia.

New Eternia really updated the design. Giving He-Man a beard was almost worth the whole figure. But throw in the other armor pieces (Pauldron, Girdle) and all of the accessories. This makes New Eternia more fun. I haven’t spoken much about it, but the hip armor plates have the button-on belt and after removing it I had to use the hair dryer to get it back on.

Revolution has a decidedly worse head sculpt. He doesn’t look like the cartoon. Maybe I’m stupid, but he resembles Shaggy from Scooby Doo, with blond hair. At least to me. I appreciate that the armor is shinier than New Eternia’s. And that battle axe is hands down the best painted one we’ve seen. But it is small. (Savage He-Man has a huge axe.)

The biggest problem for me with New Eternia is the design of the armor…how it removes and how you swap the plates. It is INCOMPATIBLE with Revolution Battle Armor He-Man. I wanted both figures, and it would have been a nice bonus to have interchangeable pieces, but Mattel just decided not to give us that.

SpartanNerd’s Rating of both MASTERVERSE Battle Armor He-Man (He-Men?)

Revolution gets 2/5. I find him to be kind of bland. The pop of chrome paint is most of his redeeming factor. That head just doesn’t do it for me. Why didn’t we get proper armor plates? He didn’t come with a sword or anything else. We could have done away with the bracer even and gotten plates to accurately represent the vintage switching look. Additionally, this armor makes him appear overweight. As a Masters of the Universe/ Transformers/ GI Joe guy, I value escapism. He-Man having a gut hits too close to home for me.

I am reluctantly giving 3/5 for New Eternia. He doesn’t look bland at all! Everything about him would be awesome if his whole torso-buck wasn’t sacrificed to make the armor work. I don’t like the way this was executed, period. What were they thinking? I feel like this buck was throw-away also. Who else could use it? Back then I bet they were thinking Battle Armor Skeletor, maybe Faker, maybe Eternian Guards. I’m willing to bet there was such negative feedback they scrapped it.

Soon there will be a New Eternia Battle Armor Skeletor released, and let me say, the preview images look AWESOME! I’m thinking that will take design cues from Revolution He-Man.

Hub-City Geeks…I did this so you don’t have to. Don’t go into purchasing both versions thinking you can swap them. It won’t work. I actually wanted both versions…I saw Revolution on sale at Wal-Mart in Westgate for $21, and New Eternia was marked down on Prime Day. I have like $32 worth here and feel I have my value. But as it is, Mattel needs to do better to give us better Battle Armor He-Man in the future.

SpartanNerd Action Figure Showdown- King vs. King. vs. King (Keldor Review)

by

2

We Three Kings…NOPE. It’s waayyy too early for that!

I thought as a review for King Keldor, I would pit him against the other two kings I own. So for this review, I will be showing off King Conan (review here) vs. King Grayskull (review here) vs. King Keldor as the review of Keldor and for a little bit of “extra fun!”

KING KELDOR PACKAGING

King Keldor’s package was just like all recent MASTERVERSE figures. This one is notably from Revolution, not New Eternia or Revelation, so there’s that. This design is from the cartoon. You can see the figure clearly, and also his alternate head.

The back features another pic, this time of King Keldor standing in front of the palace. This palace is purple…not bright orange like Filmation. I will have to go back and watch the show again to see if that is an updated design. I think I remember it being white?? I already spoke about the preview figures in my last review (Mekaneck). This packaging is a major spoiler to anyone who hasn’t watched the show, as the bio says “Skeletor in disguise,” and also Randor’s half brother. I assume any readers out there don’t care if I mention spoilers, so here you are…WARNING!

I am a huge 200x fan. I really liked what they did with Keldor/Skeletor in that show. It was looking like that was discarded for modern stories…Skeletor even has a one-shot story in the Dark Horse Masters of the Universe Revelation comics (issue 3?) where he explains his origin to Evil-Lyn as someone who lost his family in another dimension, a place where everyone is a skeleton. BUT…Revolution reveals that Skeletor has actually had his mind wiped…he really WAS Keldor.

An intriguing detail! I suppose I should say it. Masters of the Universe is the first Sci-Fi property to have William Shatner and Mark Hammil together. And they are voicing who is practically the same character. A win for Star Trek and Star Wars and MOTU all over!

The images on the side are good, featuring Motherboard, King Randor and Queen Marlena, and then “Battle Keldor” without the cape or crown. I wonder if we will be getting Randor and Marlena soon? Revolution featured both in combat situations, also.

KING KELDOR FIGURE REVIEW

Here’s what you get.

  • Alternate “gripping” hands
  • Alternate head (I propped it on Mekaneck’s weapon like I said I would!) This head has a removable crown.
  • …I guess we can count the cape.

So not many accessories. A definite weakness. There were so many things they could have given us here. In the show he is using technology left and right. Computers, things that zap. “Nanites.” There is this mark of the beast kind of story where people are getting “communion” of Motherboard’s chips. We could have got some of those. But we got nothing really. And that alternate head is almost perfectly identical. There is a slight smirk on one of them, but otherwise, the same. And I think this is a trick of paint, not sculpt.

He has good articulation except for the rubber coat. This restricts him from sitting on a throne properly. Notice I put the MOTUC Faceless One’s Havoc Staff in his hand. We could have gotten a Havoc staff with a different colorway. No accessories really gripes me with action figures.

PICTURED: MASTERVERSE Revolution King Keldor and New Eternia Skeletor. Would you have figured them to be the same person?

So Keldor is a good figure, just lacking in accessories. He can’t sit on a throne. I haven’t taken the cape off…I feel no need to. The crown fits on some other MASTERVERSE figures. Man-At-Arms if you take off his helmet. Beast Man. Teela (it looks strange because she already has a tiara). And King Grayskull, but it just doesn’t seem right.

PICTURED: MASTERVERSE Revolution Keldor and MASTERVERSE New Eternia Man-At-Arms. Keldor is armed with the purple half of the power sword from King Grayskull.

SPARTANNERD RATING OF KING KELDOR

No accessories is a big mark-off. And that the head is so similar, also a bummer. It is good to have another king. It is great that it is Keldor, an acknowledgement of one of my favorite MOTU stories.

Unfortunately, there is also a QC issue.

So as a figure, this is a 3/5. Do you agree or disagree?

WHO WILL WIN?

I will pump you up!

King Grayskull attacks King Conan with Khotal Kahn’s sword, who blocks with the Sword of Aquilonia. Keldor is ready to take advantage and chop his arm from underneath.

With Arnold out of commision, Keldor and King Grayskull square off.

AND THE WINNER IS…

I had alot of fun doing this review. King Grayskull only won because I could tell the story with the pictures I took. What do you think? Let me know in the comments!

MASTERVERSE New Eternia Thunder Punch He-Man- SpartanNerd Unboxing and Review

by

7

There was a bevy of announcements back in April, 2024 for MASTERVERSE and also Origins. Maybe these were a leak, and then Mattel just went ahead and made official announcements? Among this news, I ordered New Eternia Thunder Punch He-Man. (I also ordered New Eternia Skeletor with throne!) And I was surprised to see it ship in May. What are the SpartanNerd’s thoughts on this interpretation of the classic He-Man variant? Keep reading!

PACKAGING

Watch the SpartanNerd’s commentary on the packaging HERE.

I really did enjoy looking at the box for awhile. What I didn’t mention was it looked like He-Man was “sticking out his gut.” And indeed, when I took him out of the box, I was dumbfounded that his torso WOULD NOT MOVE. I got a little bit of bowing back even further…and this exposed a definite “daylight” in the ab crunch. I was so upset about this, I left it on the kitchen table and would mess with it every few hours. Then finally, I broke out the hairdryer. IT DIDN”T WORK! So I looked this issue up, and apparently on Reddit some people have had trouble with Tri-Klops. The solution was to just run hot water over the figure while holding it upside down. The water will penetrate the joint and allow things to loosen up. And am I glad this worked! It was bothering me seriously. Like, I was ready to categorize this figure with Marvel Legends Thor. He-Man can’t have issues like that! But with the ab crunch corrected, I decide to get in more photographs.

CONTENTS

Here’s what comes in the package:

  • Thunder Punch He-Man with backpack
  • New “power-up” bracers
  • gold Power Sword
  • classic Thunder Punch style shield
  • 2 fake caps, one gold and the other red
  • yellow fireball punch effects
  • alternate hands (2 punching, 2 gripping)

Lots of accessories, but, with some extra functionality.

PLAYING WITH THE FIGURE

Let’s look at the back of this figure first. The backpack is what Thunder Punch He-Man is all about actually anyway.

What you do is you open the backpack and place one of the caps in. I prefer the gold one in the backpack because it adds a little pop of color. This serves no function except for nostalgia. There is a small window where you can see the caps in there, but you can only barely see them and then only when viewed from the top angle.

With the backpack closed, you can see this knob. And this is also a throwback to the 1980s. This knob has a satisfying ratchet sound effect and feel when you turn it. There is a hole in the middle of the knob which serves an additional purpose.

You can put either of the caps in the shield for storage and aesthetics, and also the sword which I definitely remember from the vintage days. But the ability to store all of this on his back is new, as is a welcome improved detail which should have been a no brainer. I suppose you could look at this differently though. Unless another figure comes with a peg hole in its arms or back, this shield can only be used for Thunder Punch He-Man.

As usual, you can see where the armor straps are coming loose with really minimal play. (All I did was open it and put a cap in.). Not horrible, but this is a consistent struggle really with all Masters of the Universe action figures.

Here is He-Man “armed to the teeth.” The only accessories not here are the extra fists. I would like to note that the fireball effects fit on either kinds of hands, but fit best on the punching fist hands. When armed this way, if He-Man punches with his left, the shield becomes a “buster shield” as seen in Gundam.

Notice that the shield pegs in to the bracers, not the arms.

If you want more of a vintage look, then the bracers remove easily. (This photo was an attempt at the “Iron Man” pose…).

THOUGHTS ON THE PAINT

Now for my first real complaint. you can’t have that vintage look with this figure. For you see, the colors are very muted. I remember the original figure having candy-apple red armor and vac-metal parts. For instance the center of the armor and the shield. These should be vac-metal. I don’t understand what it takes to do vac-metal on a toy. But this was a place they shouldn’t have skimped on it.

I have other complaints about the paint. His skin tone is “orange.” Because I teach middle school chorus, to largely female students, I know this “spray-tan” look well. Not flattering for the most powerful man in the universe.

I have heard people rave about this head sculpt. It is supposedly the same head that Faker came with. (I ordered Faker but he got lost in the mail 😦 ). But as in any sculpt only as good as the paint job. His eyes appear to have eyeliner. This time he has blue eyes also, and his eyebrows aren’t as engaged.

PICTURED: MASTERVERSE 40th Anniversary He-Man and MASTERVERSE New Eternia Thunder Punch He-Man.

Don’t know if the skin tone is coming through in this photo, but trust me. It is there. My complaint about 40th Anniversary He-Man’s head sculpt is that he looks indecisive and lacking in confidence. But I have to prefer it to Thunder Punch’s softer features. On the upside, these are brown boots with white fur on top, and a brown loin cloth. 40th Anniversary boots can only really go for another He-Man or barbarian super hero, while you could use Thunder Punch’s body almost anywhere a fury loincloth can work.

PICTURED: Clawful and Thunder Punch He-Man. Both are MASTERVERSE New Eternia figures. You can really tell the difference in the reds…He-Man has a more muted, less striking red. Not quite pink but approaching. Also notice that the SpartanNerd painted that boring shield that came with Clawful.
PICTURED: MASTERVERSE New Eternia Thuunder Punch He-Man and Masters of the Universe Classics Battle Cat.

In the above two pictures, you can see where the red on New Eternia Thunder Punch He-Man doesn’t stack up to other reds where he should drop right in with. Clawful has beautiful dark-red paint as well as glossy details. He-Man from the same line has minimal paint. Things are “molded” in their color, without hardly even a wash. And the choice to tone down his coloring is baffling and disappointing. As for MOTUC Battle Cat, we all know that is a whole different level of sculpting and paint (and money!) But, this is what the true A-Lister of Thunder Punch He-Man deserves. Somehow on the deco it seems they cut the corners.

SPARTANNERD’S RATING OF MASTERVERSE NEW ETERNIA THUNDER PUNCH HE-MAN

It seems I wrote alot of complaints about the paint. But this is a really good figure! Very posable, even if none of the MASTERVERSE figures so far can really do the “Iron Man” pose. I don’t have a picture yet, but Thunder Punch He-Man sits on Battle Cat beautifully. His loin cloth is softer, and allows for better sitting poses…a plus if the upcoming Skeletor with throne does the same. He also came with terrific accessories and good play value.

I mentioned this before, but as an adult I am not spending much time playing so much as displaying any of my toys. And this is where sculpting and paint takes a higher priority in my ratings system. A kid or other person who plays heavily with the toys will get very much out of Thunder Punch He-Man. But for me, it is the nostalgia, and that paint misses it for me.

My other complaint about the ab crunch doesn’t get dinged in the ratings. The hot water really did cure it, and because I pre-ordered my figure, perhaps mine has “early production” issues. If I was a Mint-On-Card collector this would have been sent back, the way he was contorted in the box. But I’m not, and this might not be an across-the-board problem…maybe even only my figure.

The SpartanNerd’s rating of MASTERVERSE New Eternia Thunder Punch He-Man is 4/5. Do you agree or disagree, Hub-City Geeks? Let me know in the comments!

Mythic Legions Mysteries of Mythos box- SpartanNerd Action Figure Showdown

by

5

I am going to wait until the next post to talk about King Conan…in the meantime, let’s talk about what I pulled from the Four Horsemen “Mysteries of Mythos” blind box!

As you can see, I got two figures. The deal with these was purchase the Myteries of Mythos box, and you received a newer figure and an older “out of production” figure that they had in stock at the storehorsemen. The cost was $70 per box, and there was $10 shipping on all orders (flat rate shipping). This still seemed agreeable to me, and I made my order on the final day. Wouldn’t it be great to get “Eagalus?” Here was my chance! I wasn’t allergic to any of the potential older figures, and the hope of picking up that American Eagle Mythic Legion made this worth it. Furthermore, if I purchased either one at a store, I would pay more than $40. I figure this was a new type of “clearance” sale for Four Horsemen Studios.

You can see above that I got “Sir Godfrey” and “Xylernian Guard” Legion Builder. Eagalus was definitely too much of a long shot!

I thought I might do a little comparison…a showdown if you will, sort of like I did with Black Falcon and Demistros. Which figure will win?

OPENING THE XYLERNIAN GUARD LEGION BUILDER

Nothing special here, but I haven’t seen this cardback. It features a Shiva-type of figure. Here is the front and the side with description

I know there is a description, and I read it, but I don’t care one bit. Where can I find this story to read? Maybe I would care more? I am aware of a big “moose” steed that is out of production…I can assume this guy is on his team.

But for me, I see a toy soldier. We have a green “elf” look, and a caucasian look.

Here is everything in the box. Notice that the face shield on the different heads has a different design. One has a cross, while the other is plain. (You are going to see alot of pictures with the parts of “The Throne of Aquilonia.” This is the platform he is standing on and the torches in the background.

So what do we get? Two heads as mentioned above with interchangable facemasks, but non-removable helmets. Two pauldrons, a nice ornamented sword. A huge shield. A belt. A bow. A quiver. And an arrow. This shield features a three-part design. The handle comes off, and the deer figure can separate from the standard piece of the shield. However, I don’t have anything else that can replace the deer, so this is a useless idea for me until my collection gets bigger I guess.

Here is a more “archer” look, fitting for the green elf face.

The sculpt is incredible as always…this is the work of the Four Horsemen after all! There is a soft goods front skirt piece, which is backed by a plastic one. It makes it look busier, but I wonder why they did this? It looks good though. Once again, just like with the skeleton legion builder that I have which came with this same bow and arrow, it is not easy to get a good bow and arrow pose. The skeleton’s arrows were only one color…Xylernian Guard has green on the feathers and the quiver is painted brown. The arrow shafts are silver. So more went into the deco, but there needs to be a way to “knock” the arrow.

Pictured: Super7 Ultimates Black Falcon and Mythic Legions Xylernian Guard figures. Black Falcon is armed with Animal Warriors of the Kingdom gold weapons pack axe. This is a more “heavy duty” build of the legions builder figure.

In the above assassination attempt, you can see that the Super7 Black Falcon looks much more “cartoony” than the Mythic Legions figure.

Pictured: Mythic Legions Xylernian Guard legions builder with un-helmeted MASTERVERSE New Eternia Man-At-Arms head. Note that this head is just sitting there…it doesn’t peg in.

So besides these guys, Demistros, the two ML skeletons I have, and the Tower Ogre, I don’t have many alternate heads. But I found that the unhelmeted Duncan head works very well with this green color scheme.

OPENING SIR GODFREY

Crickets…(I lost the photos of the box!) Trust me. This box was exactly the same as the Skeleton Legions Builder. But it DID have a bio for Sir Godfrey. I suppose it is a shame, as this IS a named character and not really a legion builder. Or is he?

Here is everything you get in the box. Two pauldrons. A sharp mace. A sword. a large shield. A belt. and some pieces that I eventually figured out were back adapters so you can add wings. Also notable, the plume is removable from the helmet.

So Sir Godfrey is obviously a Knight Templar, and I have seen this figure on a peg at Toy Federation in Greer, South Carolina. But I never bought it, being more interested in skeletons. I have also seen a black version with white accents, but don’t know if that is the same character name or a rival or something. Notable, the head of the mace is removable for parts swapping if you have them, and also the front skirt piece is removable if you want to sit him on a ride.

The most striking thing about Sir Godfrey is this silver paint job. WOW! No photo I make could do this justice. It is almost Chrome!

Pictured: Mythic Legions Sir Godfrew and Masters of the Universe Classics Battleground Teela with MASTERVERSE Revelation Teela alternate head. Teela is armed with Sir Godfrey’s sword and her own sword for comparison.

So basically Teela has a new sword! I prefer this to the one she came with. The gold on the hilt matches her armor very well as opposed to that drab brown on her personal sword. Also Godfrey’s sword is thinner, and I appreciate that for such a character as Teela.

Pictured: Mythic Legions Xylernian Guard, Mythic Legions Sir Godfrey, and MASTERVERSE 40th Anniversary He-Man.

I find there to be beautiful congruence in this photo. The crosses on the shields and armor. The swords. That they all stand with the same pose.

Yes, they would probably be on the same team. Maybe they are training here?

ACTION FIGURE SHOWDOWN. WHO WILL WIN?

While Sir Godfrey has striking paint, he is basically a walking suit of armor. He swings down hard on the guard’s parrying sword.

Xylernian Guard has so many options for display. He is basically four characters in one! (Caucasion archer, Caucasian heavy armor, Green Face archer, Green Face heavy armor). So yeah. He knocks down Sir Godfrey and then uses that sword for what it’s for! Hope it is sharp enough to get through that armor, though.

SPARTANNERD’S RATINGS

The SpartanWife said “Well if you get characters you don’t like in this mystery box, you could just sell them.” And she was correct. I could sell these and at least recoup my losses. What losses? I don’t want to! They are terrific additions to my collection. Sir Godfrey’s head makes a great helmet for anyone to hold. All the display options of really both characters.

Scultping is equally good. Paint is wonderfully done. Xylernian Guard is more colorful, but Sir Godfrey is a heavy armored Knight Templar, and should look like this charicature of medieval knights armor. I don’t have any wings for the figures, but those back adapters will come in handy one day no doubt, and can be used on any of my Mythic Legions. They are both nicely articulated.

The only weakness in Xylernian Guard is the difficulty of posing the figure with the bow. The weakness of Sir Godfrey is that he only came with one head, and you don’t know what his face looks like. (I just saw on the internet that versions of him do have an alternate head where you can see his face). Xylernian Guard gets 5/5 AND Sir Godfrey gets 5/5. But the winner of this competition is Xylernian Guard.

Do you agree or disagree, Hub City Geeks? Let me know in the comments!

More on this photo in my next post!