Tag Archives: snout spout

GAMECOCKS Knights- “Kitbash Bros.”SpartanNerd figure reviews and customization project

by

1

Way back. WAY back….WAY BACK in February (2025) there was this magical event called “The SCMEA Conference.” (Happens every year.)

I took this couple of days of staying in Columbia South Carolina to do a bevy of figure reviews. I reviewed MASTERVERSE New Eternia Evil-Lyn, the Mythic Legions Ninian Infantry snake warrior guys, and the MASTERVERSE Skelcon. But I also began this project, that I eventually named “Kitbash Bros.” I wanted to wait until football season to release the review, so here we are on this season opening Labor Day weekend of 2025.

The Four Horsemen Studios had just released their wave of Legion Builder knights figures. These were a lot of the same knight over and over in different colorways. Most of them. (These are still on sale on their store…you should go take a look). Truly most of them are the same figure. There seems to be an “evil” and a “heroic” type, with some varying helmets. But the striking thing is the different colors. But then there was the Red Leather knight. He was different. And when I saw him, I knew it was time to get crafty.

I had been collecting knights, along with skeletons, barbarians, and apparently non-mythic legions females. (It’s true. My uncles should make fun of me for all of the Evil-lyn, Teela, Sorceress figures, etc). So I had Sir Godfrey and also a Gold Knight. And also the Xylernian Guard, more of an archer but still similar. When I got Sir Godfrey, with his “Knight Templar” motif, I noticed a dark version…”the Dark Knight Templar.” What’s more, he was far cheaper than Godfrey. But I decided to hold off.

But Red Leather Knight…Dark Knight Templar…SCMEA Convention in COLUMBIA South Carolina, home of the Fighting Gamecocks…FOREVER TO THEE. See where I was heading? I could in theory combine the pieces of the two knights and make an ultimate “Gamecocks Knight!” (There was a proper “Gothitropolis Ravens” rooster kind of in Gamecocks color. But who has that? A true mascot figure.)

(The Gothitropolis Ravens are dream figures…I felt priced out and this was one of the reasons why it took me so long to get into Mythic Legions)

I said “began” at the beginning of this post. Keep reading to see how this turned out.

(Post Structure: Dark Knight Templar review first, Red Leather Legion Builder next, then Kitbash Bros)

DARK TEMPLAR PACKAGING

The Dark Knight Templar came in the usually collector-friendly packaging. You can see the figure inside very well. (I am in a hotel room, where I have made a photography table out of the end table and a book light that was attached to the bed…I did the same thing with Evil-Lyn and others that I reviewed in this room). Perhaps notable is I don’t think sourcehorsemen is a website anymore, showing the age of this figure. (I believe this was among the first figures labeled “Mythic Legions,” so Gen 2 knight after the ravens)

The back has this image. And I don’t think I have seen this image before. It shows all the guys who came out in the wave kind of lined up in a battle formation. And there were eight figures in that wave…impressive. The only one I think I have seen is the goblin guy. Maybe the bearded guy on the bottom. The ones I have seen are probably re-issues (All Stars waves)

Here is everything you get.

  • Black Knight Templar figure
  • Halberd weapon in two parts (pole and axe)
  • Shield with the Templar Cross in black and white
  • Shoulder pauldrons of a smaller variety than usual
  • A regular knight’s sword, with a scabbard
  • a leather weapons strap.
  • Also notable…those “wings” on the helmet are removable.

So this figure works exactly like Sir Godfrey. But he has those wings on the helmet. (fins? horns?)

This was my first time with the halberd…a weapon that I would see again. This time it was in chrome. The pauldrons snapped right into place with little effort. So that’s unexpected.

BUT…the scabbard. Such a rare accessory. I was excited to see this! But sadly, the connector on the back of it came off with the tiniest of effort to get it on the weapons strap. BOO! But this would prove to be the only real problem with the figure.

Sculpt and paint. Great! (1 point)

Accessories. Great! (1 point)

Articulation. Very nice (1 point)

Stupid problems– easily broken scabbard. (no point. BOO!)

The Feels. I am going hold this point until the project is over. The purpose after all is to make a Gamecocks Knight! (? Point). But as a standalone figure he seems like he would work well in Elden Ring.

RED LEATHER KNIGHT PACKAGING

Once again, classic Mythic Legions packaging. BUT…this time we have foil lettering. NICE!

The back notably doesn’t have a cross-sell on it. Instead we get what I think is the same image that came with the Heroic Magic Effects, but with a foil Four Horsemen Studios mascot on there. There is a bio on the back. And basically “choose your armor and select your weapons”…is the cross-sell. They want you to go buy a whole mess of these guys. (You can buy the whole set for $450 or individuals for around $45)

I have installed the pauldrons, the belt, and the weapons strap already.

Here is everything you get

  • Red Leather Knight Legion Builder
  • A pair of pauldrons
  • A weapon strap (the usual)
  • A belt with leather strips
  • A shield
  • A mace that has two options for a head
  • A sword with scabbard
  • An epic sword
  • a pair of fists.

So let’s characterize this figure as the newest knights build, maybe gen 3, as opposed to the dark Knight Templar which seems to be pretty old. These pauldrons went in easier than any other mythic legions I have, including the Ninian Infantry. Right away, this was noticeable. The sculpt and paint on this are remarkable, especially since the price was fairly low. Every rivet has a gold paint hit. He is a little more glossy than I expected…I consider this to be ok, but maybe it takes away from the idea of “leather” a little bit. The head is the same knight’s head that came with Father Christmas, and I think this is the first figure to use it. I mean…look how awesome he looks. And this is without discussing the accessories.

The shield…Let’s just say this shield puts the MASTERVERSE shields to shame. It is the same shield that came with the Undead of Vikenfell, only in gold and gray. Why are there two swords? One normal knight sword, and the other epic “greatsword?” The weapons strap has a gold buckle paired on it (yay!) and the leather belt has more leather bits hanging down. If you played Skyrim you know you can use leather bits like this to improve your armor. The mace has the same head that came with the mace the Ninian Infantry had, but this time with gray and silver “enamel (wrong word?)”. The alternate is a classic iron ball with studs. So there are paint hits on every stud on the figure, and studs on the weapon. So is this guy a … stud… (Don’t ask me!)

Sculpt and paint. Great! (1 point)

Accessories. Great! (1 point)

Articulation. Very nice (1 point)

Stupid problems– Well, I was extra careful with that scabbard. But it is the exact same piece I assure you and has the same stupid problem. BUT. I am aware of it and had no breakage. So I won’t mark down on this one.

The Feels. I am going hold this point until the project is over. The purpose after all is to make a Gamecocks Knight! (? Point). Same comment as above…he seems like he would belong in Elden Ring.

THE PROCESS OF CUSTOMIZING

After I took the photos above, I got to work customizing. And I went ahead and got out the hotel hair dryer. (I didn’t want any incidents like happened with The Monkey King.)

I sat in the floor of the hotel room with all of the pieces disassembled. Right away it is obvious that the Red Leather Knight is more easily modular than the Dark Knight Templar. I don’t know how many years separate these two guys, but the Legion Builder seems to want you to take him apart and re-arrange him, while the other more legendary figure seems to fight you. I didn’t need the hairdryer on the Red Leather Knight, but I had to use it over and over on the dark knight templar. And then…as I began to re-assemble them how I wanted, Dark Knight Templar did NOT want to play well. I had to use the hairdryer again and again. And I was starting to get tired. So I put it in a box and took it home to work on over the next weekend.

…ONE WEEK LATER…(I hoped to do this quickly. Oh well!)

I got them together how I wanted, but they still weren’t “Gamecocky” enough. So I went to the store and got some magnets (no sports stickers at Dollar General Market?) and adapted one for the blank shield that came with the gold knight. Some time during the COVID crisis, I built a Master Grade Epyon Ver Ka model, and used glossy reddish-purplish paint. I used some of this. And so I now present (you probably already saw it as the lead image to this post)

TWO GAMECOCKS KNIGHTS!

I hit the Dark Knight Templar helmet with some … let’s call it “garnet” highlights on the wings and on the cross of the helmet. (Sir Godfrey has a gold cross in the same way). I’ve swapped legs pieces, shoes pieces, and arms pieces to even it out, and they both appear now to play for the Fighting Gamecocks!

And so, in memory of when Carolina defeated Clemson on November 30, 2024, with a score of 17-14, and also in honor of todays (August 31, 2025) win over Virginia Tech at the 2025 season opener, (24-11)…

SEE WHAT I DID HERE?

PICTURED: Garnet and Black vs. Orange. Kitbash bros and Cosmic Legions T.U.5.C.C Pilot vs. Cosmic Legions Wal-Torr the Mad, MASTERVERSE New Eternia Beast Man and Snout Spout.

SPARTANNERD RATING

Is it fair to rate my own project? No, what I am rating are the two action figures, and including whatever my project accomplishments were to “the feels” score.

Dark Knight Templar– This one gets 4/5, losing a point because of the broken scabbard. A scabbard is kind of a rare piece, and I was excited to see it, but so disappointed that it broke when I was just using it normally. The sculpt is great. The paint is dark and moody and great. Who doesn’t love the black knight? An iconic character re-imagined as Batman and also as Darth Vader. He did give me some problems with being a modular figure…all Mythic Legions are modular with swappable parts. But he fought against me. Just the same, I was able to get TWO Gamecocks Knights, so 4/5.

Red Leather Knight– This one gets all 5/5. Awesome paint for a Legion Builder…a figure meant to be bought as an army. Great accessories, though two swords is a head scratcher. I especially like the shield, and he looks very “football” really without even doing anything to him. Easy 5/5. And it was his parts that made the TWO Gamecocks Knights that are the KITBASH BROS.

Do you agree or disagree, Oh Hub City geeks? Let me know in the comments! Like and subscribe also the SpartanNerd YouTube Channel!

(Sorry for not many reviews lately…Summer Vacation is over an all that, but I have several things coming soon)

Mythic Legions Ninian Infantry

by

3

Watch the YouTube unboxing review HERE

When I saw these guys…I immediately bought TWO. I had been gifted some money for Christmas, and I spent it on a bunch of figures. I thought this was so good I had to get more than one.

Evidently, this was offered at Legions Con, as a preview for a big pre-order set coming up. A set with a story about thousands of years before the main story of Mythic Legions…(which I don’t know much about anyway).

So why was it so great? Keep reading!

PACKAGING

I took some photos and videos at home while I was sick, and some when I was on a trip in early February to the SCMEA convention in Columbia, SC. The hotel had a nice office area and also a good table with a book light that made for a terrific spotlight! (See New Eternia Evil-Lyn on the runway!)

So we get this blister. And it looks really cramped. It doesn’t help that the plastic collector friendly case is very reflective.

We get a lot with this figure. you can see it with the main head, an open mouth head to its left, and a spear to the right. You can see the zippy bag behind him.

But extra striking on the front of the packaging is the foiled out MYTHIC LEGIONS branding.

On the back we have this desert that we have seen before I’m pretty sure. But there is a HUGE Four Horsemen Studios symbol, also in foil.

The story of Mythic Legions is summarized in this too-small-to-read text on the back. This is all I know of the story, besides some that I have picked up from bios on the internet. This is the main way Four Horsemen Studios want you to get this story. As far as I know there is no comics or cartoons or anything, though supposedly there is a video game going to come out some time.

Let me summarize this story even more.

“Mythos has been a peaceful place, with legions of followers devoted to past heroes. There are rumors about evil forces from the past coming back to wreak havoc, and they are bringing their own dark villains to lead them.” How’s that?

On the side we get this bio for Ninian infantry. A true army-builder. You can make it who you want it to be. (I’m pretty sure this is a male…there are definite females in the Bassylia wave made available to pre-order. But as it is, it’s hard to tell with snakes.)

And “snake-men” is what the Ninian Infantry amounts to! That’s why I had to get it. No doubt MASTERVERSE will be coming out with Snake Men in 2025. Too many hints have been dropped. The packaging for Snout Spout…the even more recent packaging for Battle Armor Skeletor. They’re coming in MASTERVERSE form, no doubt. In the original MOTU line Cobra Kahn was the “harbinger,” and to me these guys fill that role as far as my collection is concerned.

WHAT DO YOU GET IN THE PACKAGE?

Package contents:

  • Ninian Infantry figure
  • Alternate open mouth head
  • Optional tail
  • Optional pauldrons
  • Spear
  • Mace
  • Shield
  • Five pairs of additional hands

Exceptional amount of things, I would say. And this guy didn’t even cost that much. Roughly the same as other “army builders.”

NINIAN INFANTRY FIGURE REVIEW

I strongly suggest using the hair dryer. I didn’t have any problems, like for instance with the Monkey King, but just be cautious. I never have been able to get the pauldrons on or the tail in properly without using a hair dryer.

He stands very well, and is super articulated. There is soft goods layered underneath the plastic armor, and it is all very complimentary.

As always, the Four Horsemen Studios have given us a terrific sculpt and such good paint. Each scale has a paint hit. And there are scales on this figure from the tip of the head to the feet. That is incredible! The design they went with is a surprising homage to the Coral Snake, a species that lives on the coast of South Carolina. Not my first thought when I think of Snake Men, but here we are! (Coral snakes are actually red, black, and yellow. BUT, these guys still make me think of them).

You can of course choose to use the tail or not to. Masters of the Unverse Snake Men don’t usually have tails. I like the tail, however. And I also prefer the fanged head.

He stands with no problems and can balance in several poses. There is a scaly “hump” on his back that you can remove to see what you usually see on the backs of Mythic Legions characters. (It’s a rectangular slot, and then the two holes are there for pegs)

ACCESSORIES

We have had the mace and the spear before, but never with this “enamel” treatment. It is like hardened, glossy paint on the business end.

PICTURED: Masterverse Revolution Sorceress Teela (I call her Green Goddess), and Mythic Legions Ninian Infantry. This image of Snake Mountain is from the recent New Eternia Panthor (review coming soon)

The shield is new, and I don’t really know which way is up. And is that a snake tail? A lizard? Well, I know what it looks like. NUMBER MUNCHER. (See there, I just out-nerded all of you!)

All those hands…this is similar to the amount of hands that came with the space version of Wal-Torr the Mad. I guess we won’t be getting too many other snake guys in these colors or something.

PROVE HOW GOOD IT IS, SPARTANNERD

This figure is so photogenic. The Meso-American styling is creative and unexpected. With snake men, my first thought is “green.” Which is pretty stupid when you think about it. Most of the Masters of the Universe snake men are fairly colorful.

The figure looks great with Evil-Lyn. Remember the 200x story, where she sold out to the Snake Men, and her payment was to be eaten by King Hiss?!! No wonder Skeletor tried to feed her to an inter-dimensional being.

PICTURED: MASTERVERSE New Eternia Evil-Lyn and Mythic Legions Ninian Infantry. Evil-Lyn is using a blue lightning magic effect, proving that those effects don’t have to be for good guys.

Ninian Infantry also goes very well with Wu Kong, the Monkey King. Similar colorfulness. And these people seem like they would be enemies. In fact, aren’t snake men everyone’s enemies.

PICTURED: Figura Obscura Sun Wu Kong the Monkey King vs. Mythic Legions Ninian Infantry.

NOPE. Thulsa Doom worships the snake god Set.

PICTURED: Mythic Legions Ninian Infantry X2, Super7 Ultimates! Battle of the Mounds Conan the Barbarian, wearing MASTERVERSE New Eternia Beast Man’s armor and wielding the bloody axe exclusive to the Battle of the Mounds set. Being sacrificed by Thulsa Doom is Valeria (Spirit), also from Battle of the Mounds. This backdrop is from the Mythic Legions Ogre Accessory set (I think)
PICTURED: Cosmic Legions Wal-Torr the Mad and T.U.5.C.C. Pilot, both with the Illuminati Ninian Infantry heads. This backdrop is an Extreme Sets piece called The Compound.

Try these heads out on the Cosmic Legions space men. The Horsemen have already offered a “character pack” using these heads with a Cosmic Legions figure also. I thought of this with the space men first, so I beat them to it! (I did pre-order these blue heads, and also some traditional alien heads.)

And let’s not forget about the packaging for Snout Spout.

PICTURED: MASTERVERSE New Eternia Snout Spout vs. Mythic Legions Ninian Infantry. The backdrop was the surprising diorama that featured King Hiss and Lady Slither, a part of Snout Spout’s packaging.

SPARTANNERD RATING OF MYTHIC LEGIONS NINIAN INFANTRY

Sculpt, terrific

Paint, unexpected and brilliant.

Accessories, perfect for army building, and extra head at that.

Articulations, no stupid problems. Just remember the hair dryer.

And what does this add to the SpartanNerd’s collection? So Much Value! Snake Men, I’m waiting.

PICTURED: MASTERVERSE Revelation King Grayskull, armed with the techno sword from the 200x Castle Grayskull. He is fighting the Mythic Legions Ninian Infantry.

So I rate this figure a 5/5. Do you agree or disagree, Hub City Geeks? Let me know in the comments!

MASTERVERSE New Eternia Snout Spout- SpartanNerd Unboxing and Review

by

9

For unboxing and initial review of the packaging for Snout Spout and Vykron , click here.

INITIAL THOUGHTS

Snout Spout is one of them characters. Yep.

So I have owned every version of Snout Spout ever released EXCEPT for the 200x Staction, which looks totally awesome! I picked up the Masters of the Universe Classics version at Big Lots that time that a bunch of Matty Collector stuff landed there…But I sold that when I did my mass sell off of MOTUC figures. (I am really starting to regret that. It wouldn’t be so bad if Mattel would support MEGA a little more). As a vintage character, I remember using that squirting action feature all the time. The Classics version didn’t have that, but came with the awesome Jaws of Life weapon. I didn’t get that “Heads pack” with the awesome 200x design.

When Mattel Creations listed Snout Spout for $33 a few months ago, I thought about it. Wouldn’t they just eventually mark it down? It did look cool, but did I like the character that much? Remember, I picked up the Classics version for $20…that was really a steal and a deal that will probably never come back up. the MASTERVERSE version didn’t look quite as fierce as the 200x version, but it didn’t look like a Dumbo either as the vintage one and stock MOTUC one did. I finally decided to when I saw Vykron on a Mattel Creations sale and thought, “what else should I get” while I was on vacation. Not getting Motherboard at $65 of Dark-lyn. Snout Spout was the winner.

So what did I think of it when I had it in hand…keep reading to see the SpartanNerd’s review, and also his first ever Special Effects Toy Photography!

ADDITIONAL PACKAGING REVIEW

When you open the box, you get to see a poster of the same artwork on the cover. BUT the other side features (EXCITEMENT!!)

YEP. SNAKE MEN! Now there is no reason to have snake men here. Snout Spout (presented as a firefighter) doesn’t have much to do with them. Mattel will have to do some explaining. He does look cool standing between King Hiss and the lady (Lady Slither?). But more importantly, this art seems to point to Snake Men coming soon to MASTERVERSE!

Snout Spout was tied in just like Vykron. No blister bubble. One thing that is an improvement on the package is the smooth black poster finish on the cardboard. But the way the trunk is wrapped…it makes it look like he was injured.

You can open the little box, which doubles as a stand, to see the rest of the items.

FIGURE REVIEW

Here is everything you get.

  • Snout Spout figure. He has a power harness and belt that is removable.
  • Fire fighter’s axe
  • Backpack
  • Three hoses
  • Alternate fist hands
  • Water blast effect

A good bit of items! And look how impressive he looks! This orange and pink and metallic purple, silver, and bright red. It all works so well!

Those eyes use “Light Piping.” And this is kind of a bummer. Mattel tries to play it up as great, but it would be better if there was some kind of battery. When you don’t have a light right overhead, you get the “dead eyes” look.

So the hoses can be attached all over the place. You can connect them from the bottom of the backpack to the power harness. You can connect the shorter one from the top of the backpack to the back of his head. You can connect one to the bottom of the axe to make it into a nozzle. You can use your imagination! You can also attach the water effext to the power harness to make it seem like he sprung a leak. Or you can put it on the end of the axe.

Speaking of imagination, the SpartanNerd is a middle school chorus teacher…one of the things that almost kept me from purchasing this was the belt. What might a middle school student (especially a boy) say about that pressure gauge?

The hose nose (this is Snout Spout’s alternate name). His real name…Jaxston. Awesome! This nose is very posable, made of several hard plastic joints. Not foam. Not rubber with wire. This was done right!

ACCESSORIES

I really already talked about them, didn’t I!

But not including the Jaws of Life…that is a missed opportunity. Now I realize that item was roughly an homage to The Four Horsemen…it was in the shape of their symbol. Still…we have Clamp Champ. There could have been some parts re-use.

The axe is pretty cool. It looks kind of dinged up and used. There could be more paint apps.

REAL SPECIAL EFFECTS PHOTOGRAPHY!

This is my first time. I watched of few YouTube videos, especially about adding explosions and fire to GI Joe Classified and Star Wars Black Series figures. I knew there would be plenty, and I could apply those here.

I took a trip to the Dollar General Market to find some dollhouse pieces or something to destroy. It would have to be really cheap. Would you believe the only thing they had was an off-brand Barbie doll house that was $25! No way. Not for this project. So I went back home, and took the to box cutter to some Amazon boxes. And some spray paint…

You can see what I did if you watch this video! Snout Spout to the Rescue video.

Here are some of the pics I got when I lit it all up!

PICTURED: New Eternia MASTERVERSE Snout Spout rescuing MASTERVERSE Revelation Evil-Lyn, who is dressed in Tri-Klops’ robe as “Eternian Winch.”

I did two special effects videos… the fire and a snow one for the barbarians. But the fire one was truly a blast! No, this Snout Spout can’t really squirt water. But he looks great fighting fire!

SPARTANNERD’S RATING OF MATTEL CREATIONS MASTERVERSE NEW ETERNIA SNOUT SPOUT

Not kidding. Snout Spout turned out to be one of the coolest figures I almost punted on. I’m glad I didn’t! He looks impressive. So tall and heroic. He is taller than anyone else besides Mekanek with all the pieces. At first I thought this torso was a re-use of 40th anniversary He-Man, but it can’t be because the neck is different and larger. It is similar size to Beast Man, but isn’t the same either. The only re-used parts I see are the pauldrons, which are Vykron’s but with all red. The head sculpt doesn’t look like the 200x, but it also doesn’t look like the sad elephant from the vintage line. Those are huge feet…he stands very stable for what is a heavy build and big head. The trunk is very posable.

The light-piping isn’t very great, some kind of electronic design would be better. I am considering modding this with some LED’s. I seem to be living dangerously lately. The Jaws of Life would have been a good include. But the many options for display, plus the bonus promise of snake men over-rides these weaknesses. Snout Spout is one of the best figures I own now! I highly recommend him. 5/5!