I think a big part of me hanging on to Masters of the Universe so long as a child was the figures were cheaper, and we were able to amass a sizable collection among me and my two younger brothers. When Mattel came out with Snake Men and the Evil Horde, this was like treasure. The SpartanBrothers could each have and collect and play a different team. (We kind of put the Snake Men in with Skeletor).
I bring this history lesson to come to another idea. What if…you have all of the figures available at the store. What if you see something else that looks cool. It always bothered me that GI Joes were smaller than He-Man. Eventually the ninja turtles were close, but didn’t quite fit. But wrestlers? These guys usually went right with He-Man. And then there were the KOs. The bootlegs. The knockoffs. The cash-grabs. You could typically get one of these “generic” figures somewhere like Dollar Tree or some other discount mart for even less than a Mattel MOTU figure. (See the review of Demistros and Black Falcon)
Which brings us to Warrior Beasts Head Hunter. Who is this guy, and why should we care? Well as soon as I saw him during the Four Horsemen’s special Spring sale, I knew I would need to get him. I’ve been collecting skeletons. He would probably sell out immediately. (Nope. He’s still available). So this was kind of a knee-jerk buy. Was he worth my $40? Keep reading!
(Extra detail- I believe this to be the among the first of “Infinite Legions”… IP licensed to the Four Horsemen to make Mythic Legions/Cosmic Legions style toys).
PACKAGING
This packaging isn’t anything great. But it is exactly what it calls out to. Head Hunter was a KO Scareglo or Skeletor variant. The Warrior Beasts line was evidently the enemies of the Remco “Lost World of the Warlord” line of toys. (A quick question of Siri tells me that Remco Toys was purchased by Jakk’s Pacific when Remco went bankrupt in 1997). Both toylines, (it’s easy to look them up on the internet) were meant to be playable alongside He-Man and Skeletor. So this packaging, it looks like the original packaging. And I can’t fault that. Otherwise, it is the same style as other Mythic Legions, with a collector friendly card back and re-usable blister. The front has an orange sign of The Warrior Beasts, just like the originals had, and then there is some “spray” colors behind the figure. The back has a photoshop of the character in action, showing an articulated jaw. One of the sides has a bio that says something like, “The Head Hunter waits around in the swamp to collect your head!”
FIGURE REVIEW
Here’s what you get in the package
Head Hunter figure
Alternate head with articulated jaw
Halberd weapon (this is in two pieces, the pole and the axe head)
Two alternate, more open hands
A wired cape.
Doesn’t he say “Scare Glow” to you?
This is it. A Scareglo knockoff with a big axe and swappable heads and hands. Those heads are identical, by the way. AND, we have both heads for other figures. AND, those are the same legs…maybe the same lower body…as the Headless Horseman. The top is the Mythic Legions barbarian. So what we have is a 100% re-used parts figure with a different paint job. And that is SO in the spirit of Masters of the Universe and knockoff versions, isn’t it!
As such, we know what we have. He stands well, very stable. He is as posable as a Masters of the Universe Classics or MASTERVERSE figure. His sculpting is the work of the best in the toy business, the Four Horsemen Studios.
His (I should say “it’s” to go with the bio) entire paint is white over a black body. I mean…the plastic is molded in shadow black. And then the white bones are painted on. The only other pop of color on the figure is the green eyes. So very effective paint, and it’s what caught my attention. That said, the way Scareglo is presented nowadays is reversed from the 1980’s.
ACTION…
The Halberd…we already have it in Chrome. It came with Mythic Legions Dark Knight Templar. But this is a different color. Be careful not to scratch the paint off of it getting it in Head Hunter’s hand. I haven’t had this accident, but it seems like it could happen.
Does he glow….NO. (Sadness)
That said, the white coloration really takes to colored lights. He looks best under pinkish, purple-ish light.
COMPARISON
First, let’s put him with Scare Glow. MASTERVERSE Scare Glow does glow in the dark. It is also more reactive to the blue light…that light energizes the glow in the dark paint on his ribs. But we could say that Headhunter is stronger as a figure as his whole body reflects that light, it just isn’t a phosphorescent effect. (Good job SpartanNerd. “Phosphoresent…”). And just like Scare Glow, I don’t see how people can confuse him and Skeletor. I get it…some kids only had “generic” or “off-brand” Skeletor. This is what they had to get because they couldn’t get the real thing. But other than a skull head, they don’t look alike.
He has an alternate head that goes perfectly with Mythic Legions, so try putting that other head on Maxillius the Harvester…but set Maxillius to classic mode by removing the awesome blood wings, and check out how you have kitbashed a “Bill and Ted’s Bogus Journey” Grim Reaper!
Heh Heh. Black Falcon lost his lunch again!
Here he is with most of my other skeleton figures
Funko Magic the Gathering Liliana commands her undead army. PICTURED: Demistros, MASTERVERSE New Eternia Skeletor, MASTERVERSE Revelation Scare Glow, Mythic Legions Skeleton Legion Builder, Mythic Legions Skeleton Legion Builder II, Death (From Marvel Legends Thanos), Mythic Legions Maxillius the Harvester, Four Horsemen Studios Warrior Beasts Head Hunter, Super7 Ultimates Black Falcon. You can find reviews for all of these at SpartanNerd.com, except for Liliana.
As with all good action figures, you can do some cool stuff with Photoshop. This took like, no effort, but terrific effect! I used ToyPixx’s recent “graveyard” backdrop, and green screened Head Hunter, layered him on the graveyard and made him a little bit transparent.
I just moved into a new house, and I kind of walk around in my yard in this same way.
SPARTANNERD’S RATING OF FOUR HORSEMEN STUDIOS WARRIOR BEASTS HEAD HUNTER
At the beginning of my review, I asked the question, was this worth my $40? Kind of yes. But also…kind of no.
He’s cool and scratches a kind of nostalgic itch even for a guy who never owned this as a kid. A color variant of Scare Glow is a nice thing to have. And if you go back and look at old pictures of the original, the Four Horsemen have updated him perfectly. “The feels”… he gets this point because I felt like I saw something I just knew I needed when I saw it.
I’m not a “parts collector,” but someone who is might be upset that there is nothing new here. On the other hand, maybe someone wants those white boots and that white cape could definitely be used on other figures. The accessory count here is just sad. I’m always joking about Super Seven Ultimates! Black Falcon, but that figure came with more accessories than any other just about, and he hit that same generic “feels.”
Lost your lunch? Let’s eat the SpartanNerd’s food. PICTURED: Super7 Ultimates! Black Falcon and Four Horsemen Studios Warrior Beasts Head Hunter. Also Mythic Legions Evil Magic Effects on the halberd. And a frozen turkey sausage English muffin.
I am awarding Four Horsemen Studios Warrior Beasts Head Hunter a 4/5. He is a nice update on a generic figure from the 1980’s, but he needs more accessories. It is a great thing to add another skeleton to my collection, even if he has that “Karate Kid” skeleton costume vibe. Sculpting, paint, articulation, all this is good. But he just needs more accessories, and this is where he loses a point.
Do you agree or disagree, Hub City Geeks? Let me know in the comments! Did you own this as a kid? Let me and the world that reads the SpartanNerd blog know!
Why do I like Conan the Barbarian so much? Basically he is the “anti-SpartanNerd.” Whatever I would do, Conan would do the opposite. For instance, if he gets mad…chop! Accompanied with “splish!” and then “Thud, thud, thump” head rolling down the steps. If I get mad, I might look at you funny…
I have anticipated this product for a LONG TIME. So long, in fact that I am not pre-ordering these Ultimates anymore. Yes…they cost more on the shelf. But I haven’t seen many rare ones. I have seen some Conan the Barbarian Ultimates! on the shelf at different stores, ranging in price from $55 (asking price) to $100 (Collectors market price). And for massive fans of the 1982 movie, this is great. I am a more casual fan of barbarians in general. But at this point I have seen the movie three times over the past 18 months, counting just last night so I could catch up for accuracy as I blog. I give the movie a solid B-Minus, that is if The Empire Strikes Back gets an A+ for reference. (Mattel wasn’t exaggerating when they passed on making Conan the Barbarian toys on account of a movie with gratuitous sex and violence…but the movie DOES capture what the comics and literature are about far better than its sequel, Conan the Destroyer). But I have a MASSIVE collection of Conan the Barbarian comics. I especially enjoyed the Dark Horse books. What they are doing now is OK, and they are going to drop a “Howardverse” on us all in the fall time. I don’t know if I will be all into that, but it might be cool! (Robert E. Howard, for anyone who doesn’t know. He is perhaps the inventor of “sword and sorcery” literature, and Conan’s creator).
Click the link here for a review of the packaging.
Let me go ahead and say some things for the haters:
I have been doing the SpartanNerd blog for years now. I have rarely done a video! Camera shy. I cringe as I hem and haw. But I am honest.
The lighting in the room isn’t great, and my glasses weren’t helping me read off of the package. I assure you…I CAN READ. My synopsis of the movie was purposely not detailed. I wasn’t even trying to do a movie synopsis!
A couple of errors. After watching the movie last night another time, I realize the villain was Thulsa Doom, not Thoth-Amon. This is really unforgivable. Sorry! I guess my nerves got the best of me. And then the other is that it wasn’t the Sword of Aquilonia that was broken in half…it was his father’s sword that we saw forged at the beginning of the movie.
REVIEW OF THE KING CONAN.
He is just SO EPIC!
Now this is just me geeking out. Some reference…my worst action figure is Marvel Legends Thor (classic comics appearance). I say this is the worst because he is not very posable. He has kneepads that break off and have to be glued. He doesn’t stand well with the heavy plastic cape. He came with Mjonir, that doesn’t fit in his hand well. That hand is a weapon holding hand where the thumb is attached to the fingers (creating a circle,) so that the weapon has to be slid in from the top. More like “forced” in. He came with a plastic rock to stand on, and I have gotten more use out of that rock than Thor!
Why this commercial about a different toy? King Conan soundly defeats that and is in the same collectors category, that’s why. We have multiple, swappable hands to be sure he can hold his weapons. (Just that sentence has TWO strictly better cards.). He has an alternate head. (It’s not THAT different). He is super articulated, and stands very sturdy. The sculpt is brilliant, and some of this toy WAS sculpted by the Four Horsemen…there are reused parts from Masters of the Universe Classics Vikor. (Vikor has so far been my favorite action figure, along with Battleground Teela. I kept them after selling off most of my MOTUC collection).
Pictured: Masters of the Universe Classics Vikor and Super7 Ultimates! King Conan. Both are flexing for the camera. Vikor has been my favorite action figure. Pretty much hands down. And if you read the SpartanNerd Blog enough, you know I have lots of pictures of him.
It is apparent when you look at that ab-crunch joint. And I haven’t tried to take off the belt (probably shouldn’t) but you can also see the belly button. Super7 solved one problem with that wrestler-style belt in that twisting his waist doesn’t give us that awkward “table shelf” apparent on the MOTUC figure. You can see from this shirtless flex that Vikor has unsightly pins in his elbow and knee joints. You can’t see a single joint on King Conan except for the torso. All of the cuts in the arms are very well concealed by the sculpt, and the knees and ankles have armor pieces that cover the joints.
Pictured: Masters of the Universe Classics Vikor and Super7 Ultimates! King Conan, with head swaps. It works very well…another clue that this is part re-use. Also, the figure on the left is holding the flail from Four Horsemen Studios Demistros.
Let’s talk about the “portrait.” He does look like Arnold Schwarzenegger, and this is what is important, isn’t it! I was tempted on the last time I went to Wal-Mart to pick up a NECA Terminator 2 action figure of The Govenator…just to compare. (I’m also a fan of that movie, of course. Almost anything Arnold. Even Mr. Freeze). No need for all of that. My only issue is that one of the head sculpts doesn’t have pupils. This is kind of un-nerving to me. There is alot of “fog” in the cinematography, and they didn’t record in high-definition either, but you can still see the pupils anyway. If anything, his eyes are darker. Just white spheres doesn’t do it for me. Now my child can probably remedy this with painting skills…I know I can’t do it!
The accessories that came with King Conan are the Sword of Aquilonia and another short sword pictured above. (It is good that it comes with a scabbard). I am uncertain where the design of this sword came from. Is it something extra that Super7 came up with, or is it a part of the costume that we can’t really see in the image from the movie? (Like…is it from production notes or something?) Someone out there knows this answer!
The Sword of Aquilonia…it does have a drab paint-job. But after watching the movie last night, I realize that this is accurate to what came with the toy. King Conan isn’t specifically pictured with it in the movie, so this can actually be considered an extra piece. Unfortunately, I have to report that the brown paint on the handle has flaked off. It’s no wonder, Conan’s gripping hands are so tight you can’t arm him with weapons without using a hair dryer.
Pictured: I call this one The Coup D’etat-Back to the Wheel of Pain. Super7 Ultimates! King Conan is being led away a prisoner by Masters of the Universe Classics Vikor and MASTERVERSE 40th Anniversary He-Man. Notice the handle on the Sword of Aquilonia (Vikor has it.)
The other accessories are things that go with the clothes…this is a chest harness with built-in paldrons, a mink stole sculpted from plastic, and a soft-goods cape.
You can see in the above picture that the armor and cape work pretty good even for a figure that is an inch taller.
Pictured: I call this one Revenge- After the Wheel of Pain. This is MASTERVERSE He-Man’s body armed with Super7 Ultimates! King Conan’s cape and armor, and King Conan’s head swapped in. He is holding the golden axe from The Animal Warriors of the Kingdom Gold Loot Box, and Mythic Legions Xylernian Guard’s shield. Also standing on King Conan’s rug. And this is about the most awesome-non photoshop picture of a barbarian action figure you can get at this price point.
THE THRONE OF AQUILONIA
Somewhere up above in this same review blog entry I mentioned Marvel Select’s Thor coming with a plastic rock for him to stand on. King Conan’s throne is just another way that Super7’s offering is so much more. But to be fair, you had to pay for it separate. I personally think they should have made this all one box. You don’t get one without the other kind of thing. I don’t own it, but maybe I will…The Figura Obscura Headless Horseman comes with a horse. This is inseparable from the character. It should have been the same here. Who is displaying a King Conan without the throne? Now early on when I was deciding whether or not to purchase King Conan, I watched video commentary about the reveals, and people were torn on if this was worth $45 or not. They have released a couple of other thrones, and they are all a similar price. (Mon-Star from SilverHawks is one I can think of). I am happy with King Conan’s throne, but it could have been a smidge cheaper on shipping, etc if it was bundled together. Or maybe they didn’t think they could sell it at a higher price. I don’t know…I just collect.
As I mentioned in the video, I felt a little burned about the rug not being removable. (Actually I kind of down-played my feelings as “an observation”). Somehow, for 18 months, I thought this would be a cloth rug. Is this communication on their part or me just being a dum-dum? It is well painted. Beautifully painted actually. But we have soft goods for the cape. Something different could have been done here.
So with the throne, you get a plastic base sculpted to be concrete, with a rug sculpted on and painted, the throne itself which is more like a bench and less like a chair, and this ornamental spear. I mentioned in the video that I was glad it wasn’t a scepter. King Conan is an unhappy king in the comics. Sitting around ruling everyone is boring for the guy. He would rather be out there busting snake cult people. That it is a spear was a way that the movie writers could express this to us without giving us a story. It is said that Netflix is wanting to make some media for King Conan, and Arnold Schwarzenegger is very much behind the project.
Pictured: Super7 Ultimates! King Conan Throne of Aquilonia, which is occupied by MASTERVERSE Revelation King Grayskull.
The above photo tackles one of the questions I had. Does it look good with other characters. I find that King Grayskull doesn’t sit so well, which has me concerned because I have ordered MASTERVERSE Skeletor with throne.
Pictured: Super7 Ultimates! King Conan Throne of Aquilonia, which is occupied by GI Joe Classified Cobra Commander.
The throne works very well for Cobra Commander.
One thing…the box that King Conan came with has a terrific diorama featuring a nice shadow behind the throne and two torch-sconces. This is just too terrific. It adds a whole lot to the whole set. The floor I used for these photos is from MASTERVERSE packaging.
A very out-of-character photo. But you can see the other hands well.
Pictured: Super7 Ultimates King Conan and Throne of Aquilonia, who is defending his throne from Four Horsemen Studios Demistros. Demistros is armed with McFarlane’s Redeemer sword. The concrete slab almost disappears in this lighting and filter.
After watching the movie last night, I notice a large disparity in the throne we are given and what was in the film. The concrete slab was three times as large! We only have a straight-ahead shot, but it is clear that the rug is sitting on concrete that is symmetrical on both sides. Super7 could have given us this…it would have been two more pieces of plastic, and then no one would have anything to say about the price point of the throne. Now that this is the SpartanNerd’s summer vacation, I have time to customize this.
SPARTANNERD’S RATING OF SUPER7 ULTIMATES! KING CONAN AND THE THRONE OF AQUILONIA
I’ve had this for about two-weeks now, and have had a couple of photo sessions with it. It delivers for the price you paid for it if you collect action figures or if you are a fan of the movie. Movie fans might be casual like me or serious. Probably a serious movie fan would go for something by Hot Toys or Sideshow or someone, where you pay more like $200. But as what is basically a Masters of the Universe Classics 5.0 figure…(Original wave 1.0, Subscription 2.0, Filmation 3.0, Ultimates! releases 4.0, and now non-MOTU is 5.0 by my counting)…$55 for the king and $45 for the throne isn’t too bad considering the current economy. Considering that this was done at what is on Mythic Legions, non-retail price scale. This is my interest. I am certainly glad I ordered the Battle of the Mounds figures that will be coming maybe in July. It checks all the boxes with little complaint. I am going to list things down below and offer two ratings…one for the king and the other for the throne.
King Conan PROS- Outstanding sculpt. Looks like Arnold Schwarzenegger. Comes with two weapons and removable armor. Excellent paint details. Plenty of hands to swap and also an alternate head with different hair.
King Conan CONS- Pupils on one of the head sculpts not there. Gripping hands are so tight they have to be heated up to work. Paint on Sword of Aquilonia is flaking off with very minimal use.
Throne of Aquilonia PROS- Great sculpt. Terrific Vac Metal paint job. Spear accessory makes all of the other accessories with the figure look sad. The platform has pegs for helping stand action figures that have holes in their feet.
Throne of Aquilonia CONS- The “concrete” slab isn’t the correct size to depict the movie scene accurately. The “rug” is a sculpted and painted detail…not a separate piece.
All of the excellent things I list add lots to the product, and has been more fun for me with time. The pupils issue and the paint flaking are both QC issues that Super7 should address, but they don’t take away from the toys much. I haven’t been displaying the head that doesn’t have pupils…I almost forget that I have it, and the two sculpts are so similar. Look at all that the Throne of Aquilonia has added to King Grayskull, Cobra Commander, and really almost anyone else who might fancy themselves to sit on a throne. Look at how useful that platform is…it has pegs that fit Mythic Legions feet, MASTERVERSE feet, and Ultimates! feet. AND a bonus…the diorama that came as part of King Conan’s package looks too great with all of these fantasy figures to throw away. I can only give a 5/5 when I take everything into account. Maybe not a perfect 5/5, but fairly close.
Pictured: Super7 Ultimates! King Conan and Ultimates! GI Joe Cobra B.A.T. The platform has pegs that made the balance required for this action possible.
Like I said…if you are a different kind of collector, you might disagree. Out there is a larger scale figure, perhaps in 1:6 scale, that you can dress in all manner of looks. Out there is a hyper-detailed statue to sit on a shelf. A large full-scale statue for your yard. That’s not what this product is meant for. It’s meant for the plastic adult collector semi-play with action figure market. The 1:12 MOTUC scale collector. And it does that terrifically.
Will he supplant Vikor? It seems like maybe Battle of the Mounds Conan might be able to when he arrives. Having this makes me wish I had the “iconic pose” version. Watching the movie last night also makes me want the camouflage version. I feel like this figure adds much to all of the barbarian things I have already. We’ll have to see if over time King Conan moves into that favorite slot!
Do you agree or disagree, Hub City Geeks. Let me know in the comments!
Also, Super7. I did what you said. I made a video. I posted to Instagram. Both things I never do. I also answered your summons to apply for the affiliate links program…and WAS DENIED. I am not Pixel Dan or Action Figure BBQ or Dorklair. Don’t claim to be. (I am very inspired by all three, and also by Poe Ghostal …great news I just found out he’s back!)
I am a real consumer who runs this blog as a hobby. It is Summer vacation. I will work on it. But Super7, you guys should reconsider! I give honest opinions and reviews. Readers, send me some advice in the comments!
spartannerd 