Category Archives: figure

FIGURA OBSCURA The Mouse King- SpartanNerd Review

by

4

Check out the video version of this review here.

NOTE: There is a secret item in this box that I review here. I placed that part of the review at the very bottom after the rating to prevent anyone from getting this spoiled.

This is my third item from this Four Horsemen Studios line after Figura Obscura Father Christmas, and Figura Obscura Sun Wu Kong the Monkey King. The FH just keep cranking out the hits. I thought for sure we would get a Ghost of Christmas Present, which would probably be an Ogre sized Santa. BUT…two years ago when the Father Christmas just came out, I’m pretty sure I heard Eric Treadaway saying something about the Mouse King. Looks like that came true!

I got an e-mail, of course, that featured some Christmas ornaments and presents on Black Friday. I mentioned it to the Spartan Wife. I spoke with the kids about it. I wondered what it would be, and would I get it. I passed on the Ghost of Christmas Past last year. She’s a pretty figure, and very Christmas. But there just isn’t much use for her in my collection in any alternate way besides some kind of bride. She is an unnaturally pale female under that dress, so I don’t have any further use for her parts. (Turns out the FH re-used the body for a figure of Nymph/Churl that hasn’t been released yet. This mixes parts of Ghost of Christmas Past with parts of Belualyth.)

But when I saw the Mouse King, I knew I had to get it. And it was a small window. In fact, the “All In” Package, that I got for an additional $15 that contains a coffee cup, a Christmas card, and a Fig-pin did sell out by 10:30. So I made the best call.

It’s true I have seen the Nutcracker ballet as well as experienced this as concert music several times. But I am not a Nutcracker Super fan. I like it OK, but Ballet isn’t my jam. I usually use the Sugar Plum Fairies theme when I play NES Tetris. And truly, besides some Trans Siberian Orchestra, that is my fandom for this work. Romantic Era Russian Nationalist classical music isn’t really my preference. (I say Beethoven was the greatest, you know 30-50 years earlier and German). But this figure…the presentation of the Mouse King as a seven-headed villain. This was too good to pass up.

I unboxed this on film, so please watch the video to see the rundown of this terrific box. But here are some more details.

PACKAGING

The packaging works very similar to what we got with Father Christmas and The Monkey King. There is an enclosing “book” capping over the box. This makes for collector friendly packaging and adds worth the the figure for displaying.

The front outside image on the capper gives us a good comic image of the figure, with gold foil details. As you wrap around the box you can see a whole Christmas setting where the battle between the Mouse King and the Nutcracker would take place.

The capper has a backdrop on the other side, giving us a scene inside a grandfather clock. Apparently the Mouse King’s lair. He has a little throne made from a compact mirror and some makeup items. There are books, some kind of snake or cat skull, giving us some context of some of the king’s past victories maybe, and an oil lamp.

Removing the capper from the box reveals the inside box.

On the inside box you have a picture of the Nutcracker and some lady I don’t remember. I’m pretty sure she isn’t the girl having the dream, as that is a child. So I don’t know who this is. One thing about the Four Horsemen showing us this picture…it is taking away some of the mystery of how they might design a Nutcracker to pit against the Mouse King in the future. On the other hand, Nutcrackers are easy to come by, especially in this size and scale, while Mouse Kings are usually missing in action. (Other fantasy villains for Christmas, right? Krampus. The Grinch. Jack Skellington.)

The back has information about the Mouse King. I haven’t read it, I confess. (There is also a booklet inside that I only glanced at. It appears to be a re-telling of the Nutcracker story.

One more thing…

Behind the figure we have yet another backdrop piece which is a clock face, featuring two swans. I don’t know the significance of these two swans, but it made me think of the Swan theatre or something like that Wagner was famous for putting on performances for King Ludwig (Is my history right about this? And if so, does it have anything to do with the Nutcracker?). I already imagine I will use this to remake some Earl Norem photos from the Golden Book “Time Trouble.”

Normally I talk about how you can see the figure inside. Nope. Not this time. They put opaque plastic over the figure so you can’t see him in the blister. Maybe the FH studios thought this one might just be too creepy to see on a store shelf?

FIGURE REVIEW.

What do we get in the package? It is a double blister, and this feels like more stuff than either Father Christmas or Monkey King. Like, more plastic and paint straight up. It weighs more.

  • The Mouse King Figure
  • Alternate neck
  • Alternate frilled collar
  • Pair of alternate clawing hands
  • a scepter
  • a sword
  • a reversible cape
  • a flight stand (what?)
  • and a mystery trash bag. (See the end of the blog entry to know what you get here. NO SPOILERS!)

How does the Mouse King work

I was very cautious this time. I have had a recent spat of problems with Mythic Legions figures. The Monkey King had a lot of problems. Last month, though, I broke Maxillius the Harvesters neck. There has been another recent Cosmic Legion that I will be blogging about soon…and so…I didn’t take any chances. I got the hairdryer out first before I removed any parts.. And thankfully nothing has broken or been too difficult to manage.

He has all of the articulation you expect, but this time he has a huge harness with seven mouse heads on it. Five of these heads are the same. There is one savage rat head with bared teeth, and then there is the king head with a crown of seven bones. This piece by itself weighs as much as the rest of the figure. Luckily, they gave him big feet, but this time with reversed knees, which are anatomically true for a rat I’m pretty sure, but the more I pose him and mess with him, the looser this has become. He also has a tail that works exactly like the Monkey King’s tail as well as the Ninian Infantry tail. In other words…it is bendy and very posable, BUT it doesn’t want to stay in the hole. It did better after I hairdryered it, but it still isn’t reliable. Which is a shame because like real rats, that tail would help him balance.

But…stop SpartanNerd. You are getting ahead of yourself! This sculpt is AMAZING! Of course it is the Four Horsemen Studios work. There are so many details here that just show tremendous love for the subject here, and so much care for their fans. This harness has a gruesome SPINE on the back, and tipped with a violent spike. Where have we seen this before? This is a throwback design from Todd McFarlane’s Spawn…the Violator and similar characters had these spikes.

The Mouse King and the Monkey King do battle at the good-guys office Christmas party. You can see the harness very well, with the five regular heads and the two other heads: Savage and King. Also, you can see how large the cape is. AND the tail. You can find reviews of most figures pictured on the SpartanNerd blog and the SpartanNerd YouTube page.
PICTURED: Masterverse New Eternia Beast Man and Mythic Legions Belualyth. Both are beast masters who control animals.

You can easily remove the harness like any other Mythic Legions head, and this gives you the option to make just a generic mouse or rat warrior. And so…the Mouse King can be used all year long, not only just at Christmas! (Well…a Mouse King can be used anyway all year I suppose.)

You can see in the photo above, I believe the only re-used parts on this figure is the chain mail loin cloth. Maybe the sword is also re-used from a previous figure. Maybe the hands are the same as the Monkey King’s?

Something new to point out about the torso. This figure has new butterfly joints in his shoulders, giving us the ability to make even more dynamic poses with our Mythic Legions. The Mouse King is the first, but evidently all new releases going forward will have this! I have found them to be really tight, and was sure to use the hairdryer. But I had no problems.

PICTURED: Figuara Obscura The Mouse King and Super7 Ultimates! King Conan. Both are doing battle to see who the real king is. If you look close, you can see the Mouse King has a stripe of blood on his face. And King Conan’s gigantic sword is dripping with blood.

Maybe they can just get along.

PICTURED: Figura Obscura Mouse King and Mythic Legions Ninian Infantry.

You can reverse the cape also, which gives us a different look. I find that in the photo above, some kind of nerve for “The Secret of NIMH”, a movie from the 80’s/

SPARTANNERD RATING OF FIGURA OBSCURA THE MOUSE KING

He earns a 5/5 hands down. Definitely one of the greatest figures of the year!

Here is my metric.

  • A point for sculpt
  • A point for paint
  • A point for articulation, especially with no stupid problems. (OK. The tail)
  • A point for accessories
  • A point for what he stands for as a unique action figure

No QC problems this time. AMEN! says Reverend SpartanNerd. (The hair dryer really improves the tail). And you can use this figure year round as a generic rat warrior creature.

Do I wish anything was different? Well, I think they will offer this in a different color some time in the future, probably brown. You might be able to do an homage to Master Splinter in this way. I also wish the seven-headed harness could be used on other figures. The way they did it, they sculpted the frilly collar onto the harness. Additionally, there is a small piece of mouse neck on every hole of the harness. So this head really only can be used for the Mouse King. And one more thing…mind you that these are not complaints…only some things that could improve it even more. We could have been given a mouse rear end. What I mean is…a regular rat body that you could put a head on. Surely in some future we will have this, but if we were given even only one, that would have been something else awesome.

But the Mouse King is awesome as he is! 5/5!

NOW IF YOU WANT TO KNOW THE SECRET ACCESSORY…KEEP SCROLLING. OTHERWISE

TURN

BACK

NOW!

!!!!!

!!!!!!

!!!!!!

!!!!!!!

YOU WERE WARNED!

A Nutcracker head! Here I have placed it on the Kitbash Bros. Gamecocks Knight. There is no Nutcracker body, so you can put him on whoever you want. You could also have it as a severed head beside the Mouse King, which was my first instinct. This head looks battle scarred and beaten, with an eye missing and just some busted up details!

Just something else that pushes this figure over the top! Thanks for reading! Like, subscribe, comment…check out my YouTube channel! Merry Christmas!

Mythic Legions “The Legendary Barbarian”- SpartanNerd Unboxing and Review

by

3

See the video review of this figure here!

In toys, companies push the limit. There are dozens…maybe hundreds of Transformers KO figures that outclass anything Hasbro is doing. How do they get away with it? One thing is change the name of the thing. Megatron becomes “Makkron.” Optimus becomes “Ray of Light” or something like that. AND, these KOs (knockoffs) get a snappy brand name that resembles “Masterpiece” somehow.

The Four Horsemen Studios have had a special relationship with Mattel…they sculpted the 200x line of Masters of the Universe toys, and kept pushing to create “stactions” to kind of complete the basic lineup of characters. Then they sculpted a prototype Classics He-Man when “Teh Lien” was officially dead, and put it in a display case for fans to begin demanding it get made. This scored them the Masters of the Universe Classics designs for what became the greatest action figure line of all time. AND helped galvanize the fanbase so that Masters of the Universe has become a reliable brand again for Mattel, even if it is mostly for adults.

Only to get dropped, evidently. After Neitlich left, the line changed hands, and then the brand was liscenced out to Super7, who also apparently purchased all of the tools to kickstart their own Ultmates! line. The Horsemen kept doing some work, however with their final Masters of the Universe contribution being Super7’s massive Classics Snake Mountain. (Which I don’t have!)

Now the Four Horsemen Studios makes a competing fantasy toyline for adults, “Mythic Legions,” which stands on faith from their fans pretty much alone. The characters feel generic enough for anyone to like, but they fit right along with 6-7 inch scale figures designed for adult collectors. And while they obviously can’t make straight up copies of existing figures they don’t have a license for, they CAN recolor what they already have. (My Whiplash figure is actually Sskur’ge from Cosmic Legions.)

“The Legendary Barbarian” is one such figure. Keep reading to see how it works!

PACKAGING

The package is exactly what you would expect. It is a nice collector-friendly blister card, but has that D&D style of art behind the figure that we have seen so many times. You can see the figure inside and most of what he comes with. Conspicuously, the helmet has empty holes where horns are supposed to attach. The back however has the chrome foil Four Horsemen Studios brand symbol and a bio for the character that essentially references all the different barbarians that this could be. There is a bio on the side, and on the other side a map of Mythos. (Mythic Legions fantasy setting.)

The Map of Mythos

It is all around average packaging for Mythic Legions, but the foil details are welcome as we don’t see those that often. Earlier this year I unboxed and reviewed the “Red Leather Knight” Legions Builder figure, and it had these details. Speaking of that specific figure, this figure also has the “pee plastic” smell when you opened it up. (It goes away after a few minutes).

FIGURE REVIEW

What do we get in the package?

  • The Legendary Barbarian figure. (Actually, the “The” is only on the website.)
  • A pair of horns.
  • An alternate head
  • A blonde hairpiece
  • A black hairpiece
  • A brown hairpiece
  • Lots of extra hands with varying grips
  • Two wrist shackles
  • One larger shackle
  • A weapons strap
  • Two shoulder pauldrons
  • A sword
  • A shield with two handle options
  • A battle axe

So alot here!

First of all, the head that is on the figure in the package is their way of flying under the copyright radar. This is a bearded Viking head with reddish brown braids on the beard. No one would ever believe this was He-Man or Conan. You can swap this head with the alternate, which has slots in the top so that the hairpieces can be changed. This head looks tough and weathered. It isn’t the kind face of He-Man, but more the grizzled face of Conan from especially the Dark Horse comics. Basically the hairpieces serve as different wigs to make him a different character. AND they included a brownish red piece also, just letting everyone know that it is up to the fans to use whichever option they would like.

The complexion is one of the most striking things about the figure. Typically He-Man is caucasian and tan, and Conan the Barbarian is either the same or just of a darker complexion. Somehow I didn’t expect this…but even more than this there is a black wash of paint over all of the hair and skin that makes him appear dirty. And this is perfect and what the Horsemen were going for.

PICTURED: MASTERVERSE 40 Anniversary He-Man and Mythic Legions Legendary Barbarian. Furry boots>cuffed boots for barbarians in my opinion.

My only complaint about the design of the figure is the boots. I would prefer the figure to have furry boots rather than cuffs. These cuffed boots are the same from the “Warrior Beasts Head Hunter” and other figures. These boots look way too civilized. I would have especially liked to see strapped sandals in this case instead of any boots at all.

Of course the figure is entirely modular. You can pop-and-swap with other Mythic Legions, Cosmic Legions, or Figura Obscura figures easily, though you probably need to use a hairdryer or hot water on some parts like the hands and feet.

ACCESSORIES

I am just going to go over these one at a time, as usual.

First of all, the shackles and chains. I don’t believe these can be opened. It took me a few days to realize that I could take the wrist bracers off and then slide these on. I STILL don’t know what the large cuff is for. At first I thought if was for his feet, but it doesn’t fit over the end of the ankle when you remove the foot. You CAN slide it over the wrist bracer, and maybe that is the intention, so you can have a quick wrist chain without removing the hand.

PICTURED: Super7 Ultimates! Thulsa Doom, Mythic Legions Legendary Barbarian, Mythic Legions Ninian Infantry army builders, and Mythic Legions kitbash Gamecocks Knight. This fight in the woods is a good way to see the chains on Legendary Barbarian’s wrists.

The weapon strap is the same that comes with most Mythic Legions figures, but this time it has painted buckles on it. You can criss-cross it over his default strap, and make this appear more like the X-shaped armor that He-Man has. You of course can also just swap them out, or even make this into a belt piece.

PICTURED: Super7 Ultimates! King Conan and Mythic Legions Legendary Barbarian. You can see how you can cross the weapon strap over the default. Also note the shoulder pauldrons and the sword.

The shoulder pauldrons work the same way as most Mythic Legions work, pegging into holes on the back of his shoulders. There is also a useless slot on his back. The pauldrons DO hinder his arm articulation, and they don’t fit tightly. But some Mythic Legions pauldrons like this are such a tight fit they don’t even work well. They look great, with sculpted cloth details underneath the metal details.

The sword…this sword doesn’t look anything like He-Man OR Conan’s sword. It looks like a sword from Zelda Breath of the Wild, or maybe a Transformers sword. It doesn’t look bad, though. But it isn’t quite as barbaric as I would like. It is oversized and more anime.

The battle axe resembles the one from Masters of the Universe Classics Vykron, and a few other viking axes I have seen. This is a cool piece that is analogous to the size of He-Man’s axes.

PICTURED: Masters of the Universe Classics Battle Cat and Mythic Legions Legendary Barbarian both in an iconic He-Man pose. The battle axe is reminiscent of several other barbarian battle axes, and is analogous in size to most of He-Man’s.

The shield is the same that we got with the Mythic Legions Undead of Vikenfell figure, only in a different color. This time we have two options for attaching it to the figure. The typical way of attaching a handle that fits in the gripping hand like a weapon. But this time we also have a clip that is reminiscent of vintage Masters of the Universe figures. Unfortunately, it fits loosely.

IT’S COMPARISON TIME…(Pixel Dan reference)

Only one of you is an actual soldier! Notice that I swapped Gamecock Knight’s horns with legendary Barbarian’s. This makes Gamecock Knight look like Shovel Knight. Oh Yeah. PICTURED: MASTERVERSE New Eternia Ram Man, Mythic Legions Kitbash Gamecocks Knight, Mythic Legions Gold Knight Legion Builder, and another kitbash gamecock. Legendary Barbarian is about to supervise some training. You can find reviews of all of these figures at SpartanNerd.com.

My favorite barbarian figure has been Masters of the Universe Classics Vykor. At this point, that is a ten-year or older figure. I have acquired MASTERVERSE Vykron, King Grayskull, Mythic Legions Balthor the Tower Ogre, Super7 Ultimates Conan the Barbarian figures, etc. But Vykor has remained my favorite. Vykor was my favorite Classics figure, and I made a point to keep him when I sold off my collection. Yes…I let go He-Man, Skeletor, Battle Cat, Panthor…everyone that I had. Even the Sky Sled and Battle Ram. Vykor stayed with me. But like I said, he is kind of dated. He was the first MOTUC figure with hidden ankle joints. But you can see the pins on his knees and his elbows. The plastic cape that he came with is heavy and weighs him down, and so I have replaced it with the one from the Undead of Vikenfell. (It fits Vykor better anyway). His sword, axe, and shield remain great, but the plastic loin cloth is also a problem. Vykor has never been able to ride Battle Cat, for instance.

PICTURED: Masters of the Universe Classics Vykor and Mythic Legions Legendary Barbarian.

The Legendary Barbarian doesn’t have the weaknesses of Vykor, as it is a modern figure. But his accessories aren’t quite as good. On the other hand, the ability to swap out the heads is incredible. Someone out there with deeper pockets than the SpartanNerd has bought several of these to display each one. I don’t kneed to do that, as I think changing the head/hair is great and also genius. AND he can sit on Battle Cat.

SPARTANNERD RATING OF MYTHIC LEGIONS LEGENDARY BARBARIAN

PICTURED: MASTERVERSE New Eternia Faker on Panthor using the Cosmic Legions snake head, MASTERVERSE Movie He-Man, MASTERVERSE 40th Anniversary He-Man (retail version) armed with Mythic Legions battle axe, MASTERVERSE Kitbash Battle Armor He-Man on Masters of the Universe Classics Battle Cat, and MASTERVERSE New Eternia Thunder Punch He-Man. Each has their own strengths in their way. But Legendary Barbarian is better than the average of the others.

I mean…he is better than any of the MASTERVERSE He-Man figures except for the 40th Anniversary figure. His sculpt, paint, articulation, and accessories are really good. You have so many options for displaying this figure…I venture to say for the value you have basically four options for heads. I’ve come to think about the default head as the extra head actually.

Do I even have to mention the “feels point?” Of course this figure gets the SpartanNerd’s point for that. It is coming to the end of 2025, and I am thinking about what I think might be the best figure of the year. Legendary Barbarian is certainly a candidate!

So this figure is a 5/5! Do you agree or disagree, Hub City Geeks? Let me know in the comments!

MASTERVERSE New Eternia Mantenna- SpartanNerd Review

by

0

See YouTube versions of this and other reviews HERE

I grew up with two younger brothers. Being the big brother and general winner, I usually had the good guys when it came to Masters of the Universe. One brother had Skeletor’s guys, and another Hordak’s guys. But near the end, neither of them were getting Masters figures. There were a lot more GI Joes, Ninja Turtles, and other stuff happening. So I got a few baddies of my own, and Mantenna was one of them.

I’m unsure of when I realized the character had four legs. The figure only had two…but if you look closely you can see that they are actually skinny legs sculpted together. Kind of genius. I probably realized it after watching She-Ra, but maybe from the mini-comic. But all around…one of the weirdest looking dudes. And he had a lever on his back to make his eyes pop up. So very cool to a 10-11ish year old.

So how did the MASTERVERSE version come out?

PACKAGING

You can see above that this is the same kind of packaging as we have gotten now for around three years. Why isn’t he from the “New Etheria” line? The recent Hordak was.

The wraparound image shows the Evil Horde attacking Eternia. The Horde mothership flies above the palace with a fleet of Klingon Birds of Prey (not). Isn’t that the Temple of Shakoti in the background?

The other side has the library image, with the alternate eyeballs extended on their stalks.

The back shows a photoshop of the toy, with what might be the Whispering Woods in the background. Mantenna is searching for pieces of Castle Greyskull. Interesting!

You have some action feature images…it shows off the weapon he has, which isn’t a crossbow (BOO) and his alternate looks with different eyes.

The cross sell features Anti-Eternia He-Man and Mosquitor (Review coming soon.)

I probably won’t get Anti-Eternia He-Man. Just…Why? I’ll accept it as a gift from someone, though!

FIGURE REVIEW

What do we get in the package?

  • Mantenna Figure
  • Eyeball Ray Gun
  • Two eye stalks
  • One alternate eye.

He was $23. So I’m saying this up front. He is a good hunk of plastic. But not much paint. Most of the resources here went to the four legs and the swapping eye feature.

I am actually showing you the closest you can get the figure to appearing like the vintage member of the Horde. You can’t pose the legs parallel to one another. Otherwise all of his articulation is good. I do wish you could close his mouth instead of him having this static toothy round cavity.

The good thing is, though, this may be a hint of how we will get Modulok and Multi-Bot. Both guys had four legs in their default mode. But here is a question…these legs have single jointed knees, and furthermore the knee area looks quite a bit like the Origins figures. So … are these legs swappable? I am not going to risk it, but if they are, then that is another hint about those two lego-type characters.

All around, the blue plastic…it is too dark and just needs paint. This was a cost-cutting measure I’m sure. I’m not a fan of Webstor or Zodac. Why? BORING colors. Mantenna wasn’t in that category for me, but they managed to do it wrong. Maybe the plastic is too dark…or maybe it needs a “wash” of some lighter color blue. I can’t really tell…photos and such that Mattel provides have super good lighting and it kind of offsets the effect. But if you don’t have it under that perfect jewelry store condition, you have overpowering dark blue.

ACCESSORIES

Is it really that hard to give us a crossbow instead of this dumb weapon?

You’ll have to make up your own story for this one. BUT…Snout spout can easily win by spraying water in his eyes. Thunder Punch He-Man can use that sword and … chop… the stalks… Same with Battle Armor Skeletor and the axe. If Mantenna shoots eyeballs with that gun, couldn’t Panthor just pounce on it? I’m just saying…PICTURED- MASTERVERSE New Eternia figures, Battle Armor Skeletor, Panthor, Two-Bad, Snout Spout, Thunder-Punch He-Man, and Mantenna. I DO appreciate that he is as big as Snout Spout, but at a lower price point.

I really wish they were giving us crossbows. Maybe updated ones. I wouldn’t mind this eyeball gun so much if they also included a crossbow. Or maybe if the gun was an eyeball-crossbow arrow or bolt.

The eye-swapping feature…to do it, you have to remove the upper face of the figure. THEN the eyeballs are in the socket pretty good. I had to use a guitar pick to wedge them out.

They alternate eyeballs they give us feel like a down-grade from the main eyes he is packed using. I don’t much see the point, these may be a reflection of the She-Ra cartoon. I haven’t watched it enough and don’t have much memory about it.

SPARTANNERD RATING

It’s a shame, but I just don’t have that much more to say. The blue darkness overpowers the positives. Mattel has opted to cut the paint and promote the plastic…something we see more and more. Kobra Khan was bland for this exact reason. That shiny green was OK on a snake, but not spectacular when seen through the larger lens of other available figures. GI Joe Classified…same price point, always better paint than this. Mythic Legions cost more, but face it…MASTERVERSE is competing against that brand, and all of the figures from plain skeletons to royalty have exceptional details in the sculpt and the paint.

It’s like Mantenna hits the big point from the 1980’s. He has bug eyes and a bizzarre head. Mattel hit these points, and everything else was an afterthought. I remember hearing the Four Horsemen talk about laboring to design figures. To make them epic. I’m afraid Mantenna doesn’t feel epic. It feels like a chore to take pictures of him…and that is a definite bad thing.

PICTURED: MASTERVERSE New Eternia Mantenna and Mer-Man. Do you see what I mean about Mantenna’s paint? Some of the same design elements are present in Mer-Man, but somehow it works better. Obviously more care was put into it. I feel like I have to add paint to Mantenna so that it will be right.
Mantenna decided to crash the office party. And you see what I mean. PICTURED: MASTERVERSE 40 Anniversary He-Man (retail), MASTERVERSE New Eternia Teela, Man-At-Arms, and Fisto. MASTERVERSE Revelation Sorceress Teela, King Greyskull, and Captain of the Guard Teela alternate head on MOTUC Battleground Teela body, and Super7 ULTIMATES! Battle of the Mounds Valeria.

You can see in the above picture different lines and even companies. And the colors on Mantenna seem to be more plain than anyone else. He’s big, blue and red. But that doesn’t make him epic.

Even if he is worse than these two, he does feel like he belongs with them.

I am awarding MASTERVERSE New Eternia Mantenna 3/5. He just doesn’t do it for me. The lack of accessories and the boring colors make someone who should be amazing rather bland. He gets a feels points because I NEEDED Mantenna on my quest to recollect the toys I once had. He doesn’t have stupid problems, but if a kid gets this they might have a hard time swapping those eyes. His sculpt is OK. Points subtracted because of accessory count and paint apps.

3/5…Do you agree or disagree? Let me know in the comments!

MASTERVERSE Moss Man- SpartanNerd Unboxing and Review

by

3

Check out this review on my YouTube channel!

I saw Moss Man’s reveal online at SDCC, and thought, “I better jump on that or I will miss it like I missed Blade.” (Yes. Still belly-aching about that). What I didn’t expect was for it to be offered FIRST to the people who subscribed to Club Grayskull last year.

All year long I have thought “What a waste of $10. All they have released are Origins figures.” I haven’t been collecting Origins Masters of the Universe figures, mainly because the first couple of waves had colors that pushed against my sensibilities. I mean, the vintage form factor is obviously cool, but the colors they chose just looked like…Play-Doh. And I couldn’t bear it. And even now, the Origins figures still have an off-putting quality. I do feel like what is up ahead in that scale for Mattel looks better, with the MOTU/Thundercats mashup. And then there is the 200x figures that they previewed kind of in the same form as the Thundercats thing.

But back to MASTERVERSE. The line aimed at the Classics collectors. Club Grayskull hasn’t put anything out for us until Moss Man. Now that he is out, I will be looking for more stuff.

Moss Man- This is a figure I remember playing with a lot as a child. That flocking…You know…I thought I imagined that piney fresh scent. I played with him a lot outside in actual moss. We had Stinkor, who definitely smelled “bad.” But Moss Man’s smell was at least not overpowering the actual smell of the pine trees, pecan trees, maple trees, oak trees in Spartanburg. I specifically remember having a large pecan trees on top of a hill behind our house, and there being moss on this tree and hill. It was a good place to play with Moss Man, and also freak out my mother! (“Moss is poisonous.” She might have been right…I looked it up.)

I would eventually get the Masters of the Universe Classics version, which was also flocked. There was controversy at the time…something about “flocked ears.” Mine didn’t have flocked ears.

This was my Classics Moss Man…I sold him off as part of my post-Covid purge. I am regretful.

So how did he turn out? And was he worth the extra $10 paid a year ago? Keep reading!

PACKAGING

Moss Man came in a plastic-free box that contained no blister, and no photography. All artwork. This is in line with Vykron and Snout Spout. This is a great box to keep for storage, or in my case to beef up the forest scenery in my diorama. It has a large picture of Moss Man’s face with energized eyes, reminding us that in recent versions Moss Man is considered a nature god. This is a wraparound image, that has more plants on both sides and some Eternian animals.

The back has an artwork rendition of Moss Man, rather than a photoshop. So this is very welcome in my book. More Art=More Better. If you watched my YouTube video already, you know I missed the faint images of the Roton flying in the background.

So Roton has been on several MASTERVERSE packages. Is this a hint, Hub City Geeks?

Inside there is yet another figure cover. What is disappointing here is that because the words Moss Man are so prevalent, this isn’t that usable as a diorama piece.

I’m complaining about it not being usable, but it really is. You could cut it up or photoshop it or whatever. They gave you something to work with.

Sorry for the blurry photo. This Moss Man title reminds me of a student at the school where I work’s t-shirt for the musical “Wicked”

The other side has an opening in the forest revealing the three Eternia towers. It also features a tree resembling Skytree…the oldest living thing in Eternia according to the filmation cartoon series.

This is a nice picture. But Moss Man is so large it looks strange behind him.

WHAT DO YOU GET IN THE BOX?

A new use for Mekaneck. Moss Man is ten neck segments tall. (8 inches at the tip of the horn on his back.
  • Moss Man figure
  • Alternate “plant” hand
  • Knife (dagger or machete?)
  • Belt with knife sheath
  • Club (or magic wand/staff?)

So not many accessories here. Notably, he didn’t come with any alternate hands. “The plant hand” thing is also usable in other ways around or on the figure.

FIGURE REVIEW

MASTERVERSE New Eternia Moss Man is very large. The horn on his back makes him slightly taller than Snout Spout, and this is saying something! But if you dig a little deeper, you can see what is really going on here.

Moss Man stands even taller than Snout Spout.

You basically have New Eternia Beast Man’s buck with an armor piece over the top of it. It is clear that the torso, the biceps and elbows, and the thighs are all the same parts that were on NE Beast Man. And this is kind of fitting, considering that the vintage figure was a repaint of Beast Man with flocking.

Moss Man IS taller than NE Beast Man. And yet they share the same basic parts. It is the feet and the head that pushes him over.

Sometimes I think big companies (like Mattel) want US to forget about stuff that came before. For instance, we had a Moss Man in MASTERVERSE already…it was based on the Kevin Smith show. I never picked it up because it didn’t look like MY Moss Man. And they probably want us to forget about the New Eternia Beast Man shown here. (They have two more recent Beast Man figures…the movie version and the ugly version with the articulated jaw. BUT THE SPARTANNERD REMEMBERS! And so Moss Man is using Beast Man’s parts.

I haven’t removed the armor, but that armor is what makes him so tall…it has the spikes on the back similar to Clawful’s armor.

In turning Moss Man’s head, he has so much Michael Bolton hair that his head can’t turn without popping off when his beard rubs against that armor. This is an articulation point worth mentioning, but it is a common problem so I won’t mark off for it. Just the same, don’t be disturbed if your Moss Man loses his head…it goes right back on.

He stands very well, with big feet. But he is kind of stiff in the articulation department. He doesn’t’ seem to be “lanky” like Two-Bad, but he is such a chunk at least I kind of want him to stand there and flex on my diorama.

THE FLOCKING DEBATE

I don’t know how I feel about this not having flocking. The flocking is such an embedded characteristic of the character.

I have two vintage Moss Man figures. One of these was definitely mine as a child. I don’t know why I have two. That flocking is NASTY after all these years.

The sculpt on NE Moss Man is undeniably good. But by removing that fuzzy texture (and piney scent,) it is like removing the soul of the character.

Now if he was flocked, we would lose those sculpted details.

By not releasing him with flocking, they increase their artistic opportunities. But I wonder if there might be a compromise somewhere. Also…maybe one day this will be releases with flocking. OK…one more thing. NE Beast Man and a few others have SOFT GOODS. It just seems like somehow that fuzzy furry quality could have been represented somehow. Maybe make that plastic armor piece cloth goods or something. Or the arm wraps cloth goods.

On the other hand, you can clearly see that my two vintage toys have taken a beating. And that flocking has rubbed off around the joints.

I don’t have to have a totally flocked Moss Man, but that part of his legacy needed to be honored here.

Check out this Earl Norem image from the He-Man and the Masters of the Universe Magazine, May 1985 issue. (I haven’t removed the poster, so I can only show the bottom corner)

Over and over in old media, Moss Man is presented as a fuzzy-wuzzy.

Check out this DC comic, He-Man and the Eternia War Issue 10 (this one has Skeletor transforming on the front)

Moss Man kamikazes the Fright Zone in this story.

DC New 52 designed him with these horns, but just the same he is a hairy beast. He also wears the gold armor that they seemed to favor.

SPARTANNERD RATING

Sculpt- 1 point. My only complaint about the sculpt is that Mattel doesn’t take efforts to hide the joints. But this is across the board in this line. And at large the figures are under $25. So they aren’t Mythic Legions sculpted and engineered by the Four Horsemen studios.

Paint- 1 point. This is a good paint job. Maybe something could have been done to make his face “pop” a little better in a green context, however.

Articulation- 1 point, with no real “stupid problems”. He stands very well, AND in this picture where he is throwing Stinkor at Two-Bad, I left the room for awhile and returned and he was still standing there holding him all stable!

I did this photo as an homage to the minicomic “The Stench of Evil”. What…your Two-Bad didn’t come with a helmet?

Accessories- Why didn’t this come with more stuff? Why no left gripping hand? BOO! I would even be ok with paying more money for more appropriate accessories.

The feels- Well he’s Moss Man. I have so many fond memories! Playing with him outside in the moss and getting fussed at! On the heroic team, we have needed a Moss Man.

I am not marking Moss Man down for not being flocked. But I am marking him down for not having more accessories. I used that craft moss I got from Hobby Lobby. Mattel should have given us some plants and trees and such. In fact…I had this complaint about the Classics version. (That flower in the photo was in the wild when I took the photo.)

This is Figura Obscura Monkey King, with MASTERVERSE New Eternia Moss Man. Also MOTUC Temple of Darkness Zoar.

I rate MASTERVERSE New Eternia Moss Man a 4/5, losing a point for not having many accessories. I also feel that there should have been some way to present flocking on this figure, if not having him totally flocked. And it isn’t like the technology doesn’t exist…go check out the Mythic Legions “Bryophytis” (I don’t own this one)…he looks just like Moss Man should with a different head.

Do you agree or disagree? Let me know in the comments!

GAMECOCKS Knights- “Kitbash Bros.”SpartanNerd figure reviews and customization project

by

3

Way back. WAY back….WAY BACK in February (2025) there was this magical event called “The SCMEA Conference.” (Happens every year.)

I took this couple of days of staying in Columbia South Carolina to do a bevy of figure reviews. I reviewed MASTERVERSE New Eternia Evil-Lyn, the Mythic Legions Ninian Infantry snake warrior guys, and the MASTERVERSE Skelcon. But I also began this project, that I eventually named “Kitbash Bros.” I wanted to wait until football season to release the review, so here we are on this season opening Labor Day weekend of 2025.

The Four Horsemen Studios had just released their wave of Legion Builder knights figures. These were a lot of the same knight over and over in different colorways. Most of them. (These are still on sale on their store…you should go take a look). Truly most of them are the same figure. There seems to be an “evil” and a “heroic” type, with some varying helmets. But the striking thing is the different colors. But then there was the Red Leather knight. He was different. And when I saw him, I knew it was time to get crafty.

I had been collecting knights, along with skeletons, barbarians, and apparently non-mythic legions females. (It’s true. My uncles should make fun of me for all of the Evil-lyn, Teela, Sorceress figures, etc). So I had Sir Godfrey and also a Gold Knight. And also the Xylernian Guard, more of an archer but still similar. When I got Sir Godfrey, with his “Knight Templar” motif, I noticed a dark version…”the Dark Knight Templar.” What’s more, he was far cheaper than Godfrey. But I decided to hold off.

But Red Leather Knight…Dark Knight Templar…SCMEA Convention in COLUMBIA South Carolina, home of the Fighting Gamecocks…FOREVER TO THEE. See where I was heading? I could in theory combine the pieces of the two knights and make an ultimate “Gamecocks Knight!” (There was a proper “Gothitropolis Ravens” rooster kind of in Gamecocks color. But who has that? A true mascot figure.)

(The Gothitropolis Ravens are dream figures…I felt priced out and this was one of the reasons why it took me so long to get into Mythic Legions)

I said “began” at the beginning of this post. Keep reading to see how this turned out.

(Post Structure: Dark Knight Templar review first, Red Leather Legion Builder next, then Kitbash Bros)

DARK TEMPLAR PACKAGING

The Dark Knight Templar came in the usually collector-friendly packaging. You can see the figure inside very well. (I am in a hotel room, where I have made a photography table out of the end table and a book light that was attached to the bed…I did the same thing with Evil-Lyn and others that I reviewed in this room). Perhaps notable is I don’t think sourcehorsemen is a website anymore, showing the age of this figure. (I believe this was among the first figures labeled “Mythic Legions,” so Gen 2 knight after the ravens)

The back has this image. And I don’t think I have seen this image before. It shows all the guys who came out in the wave kind of lined up in a battle formation. And there were eight figures in that wave…impressive. The only one I think I have seen is the goblin guy. Maybe the bearded guy on the bottom. The ones I have seen are probably re-issues (All Stars waves)

Here is everything you get.

  • Black Knight Templar figure
  • Halberd weapon in two parts (pole and axe)
  • Shield with the Templar Cross in black and white
  • Shoulder pauldrons of a smaller variety than usual
  • A regular knight’s sword, with a scabbard
  • a leather weapons strap.
  • Also notable…those “wings” on the helmet are removable.

So this figure works exactly like Sir Godfrey. But he has those wings on the helmet. (fins? horns?)

This was my first time with the halberd…a weapon that I would see again. This time it was in chrome. The pauldrons snapped right into place with little effort. So that’s unexpected.

BUT…the scabbard. Such a rare accessory. I was excited to see this! But sadly, the connector on the back of it came off with the tiniest of effort to get it on the weapons strap. BOO! But this would prove to be the only real problem with the figure.

Sculpt and paint. Great! (1 point)

Accessories. Great! (1 point)

Articulation. Very nice (1 point)

Stupid problems– easily broken scabbard. (no point. BOO!)

The Feels. I am going hold this point until the project is over. The purpose after all is to make a Gamecocks Knight! (? Point). But as a standalone figure he seems like he would work well in Elden Ring.

RED LEATHER KNIGHT PACKAGING

Once again, classic Mythic Legions packaging. BUT…this time we have foil lettering. NICE!

The back notably doesn’t have a cross-sell on it. Instead we get what I think is the same image that came with the Heroic Magic Effects, but with a foil Four Horsemen Studios mascot on there. There is a bio on the back. And basically “choose your armor and select your weapons”…is the cross-sell. They want you to go buy a whole mess of these guys. (You can buy the whole set for $450 or individuals for around $45)

I have installed the pauldrons, the belt, and the weapons strap already.

Here is everything you get

  • Red Leather Knight Legion Builder
  • A pair of pauldrons
  • A weapon strap (the usual)
  • A belt with leather strips
  • A shield
  • A mace that has two options for a head
  • A sword with scabbard
  • An epic sword
  • a pair of fists.

So let’s characterize this figure as the newest knights build, maybe gen 3, as opposed to the dark Knight Templar which seems to be pretty old. These pauldrons went in easier than any other mythic legions I have, including the Ninian Infantry. Right away, this was noticeable. The sculpt and paint on this are remarkable, especially since the price was fairly low. Every rivet has a gold paint hit. He is a little more glossy than I expected…I consider this to be ok, but maybe it takes away from the idea of “leather” a little bit. The head is the same knight’s head that came with Father Christmas, and I think this is the first figure to use it. I mean…look how awesome he looks. And this is without discussing the accessories.

The shield…Let’s just say this shield puts the MASTERVERSE shields to shame. It is the same shield that came with the Undead of Vikenfell, only in gold and gray. Why are there two swords? One normal knight sword, and the other epic “greatsword?” The weapons strap has a gold buckle paired on it (yay!) and the leather belt has more leather bits hanging down. If you played Skyrim you know you can use leather bits like this to improve your armor. The mace has the same head that came with the mace the Ninian Infantry had, but this time with gray and silver “enamel (wrong word?)”. The alternate is a classic iron ball with studs. So there are paint hits on every stud on the figure, and studs on the weapon. So is this guy a … stud… (Don’t ask me!)

Sculpt and paint. Great! (1 point)

Accessories. Great! (1 point)

Articulation. Very nice (1 point)

Stupid problems– Well, I was extra careful with that scabbard. But it is the exact same piece I assure you and has the same stupid problem. BUT. I am aware of it and had no breakage. So I won’t mark down on this one.

The Feels. I am going hold this point until the project is over. The purpose after all is to make a Gamecocks Knight! (? Point). Same comment as above…he seems like he would belong in Elden Ring.

THE PROCESS OF CUSTOMIZING

After I took the photos above, I got to work customizing. And I went ahead and got out the hotel hair dryer. (I didn’t want any incidents like happened with The Monkey King.)

I sat in the floor of the hotel room with all of the pieces disassembled. Right away it is obvious that the Red Leather Knight is more easily modular than the Dark Knight Templar. I don’t know how many years separate these two guys, but the Legion Builder seems to want you to take him apart and re-arrange him, while the other more legendary figure seems to fight you. I didn’t need the hairdryer on the Red Leather Knight, but I had to use it over and over on the dark knight templar. And then…as I began to re-assemble them how I wanted, Dark Knight Templar did NOT want to play well. I had to use the hairdryer again and again. And I was starting to get tired. So I put it in a box and took it home to work on over the next weekend.

…ONE WEEK LATER…(I hoped to do this quickly. Oh well!)

I got them together how I wanted, but they still weren’t “Gamecocky” enough. So I went to the store and got some magnets (no sports stickers at Dollar General Market?) and adapted one for the blank shield that came with the gold knight. Some time during the COVID crisis, I built a Master Grade Epyon Ver Ka model, and used glossy reddish-purplish paint. I used some of this. And so I now present (you probably already saw it as the lead image to this post)

TWO GAMECOCKS KNIGHTS!

I hit the Dark Knight Templar helmet with some … let’s call it “garnet” highlights on the wings and on the cross of the helmet. (Sir Godfrey has a gold cross in the same way). I’ve swapped legs pieces, shoes pieces, and arms pieces to even it out, and they both appear now to play for the Fighting Gamecocks!

And so, in memory of when Carolina defeated Clemson on November 30, 2024, with a score of 17-14, and also in honor of todays (August 31, 2025) win over Virginia Tech at the 2025 season opener, (24-11)…

SEE WHAT I DID HERE?

PICTURED: Garnet and Black vs. Orange. Kitbash bros and Cosmic Legions T.U.5.C.C Pilot vs. Cosmic Legions Wal-Torr the Mad, MASTERVERSE New Eternia Beast Man and Snout Spout.

SPARTANNERD RATING

Is it fair to rate my own project? No, what I am rating are the two action figures, and including whatever my project accomplishments were to “the feels” score.

Dark Knight Templar– This one gets 4/5, losing a point because of the broken scabbard. A scabbard is kind of a rare piece, and I was excited to see it, but so disappointed that it broke when I was just using it normally. The sculpt is great. The paint is dark and moody and great. Who doesn’t love the black knight? An iconic character re-imagined as Batman and also as Darth Vader. He did give me some problems with being a modular figure…all Mythic Legions are modular with swappable parts. But he fought against me. Just the same, I was able to get TWO Gamecocks Knights, so 4/5.

Red Leather Knight– This one gets all 5/5. Awesome paint for a Legion Builder…a figure meant to be bought as an army. Great accessories, though two swords is a head scratcher. I especially like the shield, and he looks very “football” really without even doing anything to him. Easy 5/5. And it was his parts that made the TWO Gamecocks Knights that are the KITBASH BROS.

Do you agree or disagree, Oh Hub City geeks? Let me know in the comments! Like and subscribe also the SpartanNerd YouTube Channel!

(Sorry for not many reviews lately…Summer Vacation is over an all that, but I have several things coming soon)

The Warrior Beasts Head Hunter

by

4

(NOTE: Some photos were taken from the YouTube review).

I think a big part of me hanging on to Masters of the Universe so long as a child was the figures were cheaper, and we were able to amass a sizable collection among me and my two younger brothers. When Mattel came out with Snake Men and the Evil Horde, this was like treasure. The SpartanBrothers could each have and collect and play a different team. (We kind of put the Snake Men in with Skeletor).

I bring this history lesson to come to another idea. What if…you have all of the figures available at the store. What if you see something else that looks cool. It always bothered me that GI Joes were smaller than He-Man. Eventually the ninja turtles were close, but didn’t quite fit. But wrestlers? These guys usually went right with He-Man. And then there were the KOs. The bootlegs. The knockoffs. The cash-grabs. You could typically get one of these “generic” figures somewhere like Dollar Tree or some other discount mart for even less than a Mattel MOTU figure. (See the review of Demistros and Black Falcon)

Which brings us to Warrior Beasts Head Hunter. Who is this guy, and why should we care? Well as soon as I saw him during the Four Horsemen’s special Spring sale, I knew I would need to get him. I’ve been collecting skeletons. He would probably sell out immediately. (Nope. He’s still available). So this was kind of a knee-jerk buy. Was he worth my $40? Keep reading!

(Extra detail- I believe this to be the among the first of “Infinite Legions”… IP licensed to the Four Horsemen to make Mythic Legions/Cosmic Legions style toys).

PACKAGING

This packaging isn’t anything great. But it is exactly what it calls out to. Head Hunter was a KO Scareglo or Skeletor variant. The Warrior Beasts line was evidently the enemies of the Remco “Lost World of the Warlord” line of toys. (A quick question of Siri tells me that Remco Toys was purchased by Jakk’s Pacific when Remco went bankrupt in 1997). Both toylines, (it’s easy to look them up on the internet) were meant to be playable alongside He-Man and Skeletor. So this packaging, it looks like the original packaging. And I can’t fault that. Otherwise, it is the same style as other Mythic Legions, with a collector friendly card back and re-usable blister. The front has an orange sign of The Warrior Beasts, just like the originals had, and then there is some “spray” colors behind the figure. The back has a photoshop of the character in action, showing an articulated jaw. One of the sides has a bio that says something like, “The Head Hunter waits around in the swamp to collect your head!”

FIGURE REVIEW

Here’s what you get in the package

  • Head Hunter figure
  • Alternate head with articulated jaw
  • Halberd weapon (this is in two pieces, the pole and the axe head)
  • Two alternate, more open hands
  • A wired cape.
Doesn’t he say “Scare Glow” to you?

This is it. A Scareglo knockoff with a big axe and swappable heads and hands. Those heads are identical, by the way. AND, we have both heads for other figures. AND, those are the same legs…maybe the same lower body…as the Headless Horseman. The top is the Mythic Legions barbarian. So what we have is a 100% re-used parts figure with a different paint job. And that is SO in the spirit of Masters of the Universe and knockoff versions, isn’t it!

As such, we know what we have. He stands well, very stable. He is as posable as a Masters of the Universe Classics or MASTERVERSE figure. His sculpting is the work of the best in the toy business, the Four Horsemen Studios.

His (I should say “it’s” to go with the bio) entire paint is white over a black body. I mean…the plastic is molded in shadow black. And then the white bones are painted on. The only other pop of color on the figure is the green eyes. So very effective paint, and it’s what caught my attention. That said, the way Scareglo is presented nowadays is reversed from the 1980’s.

ACTION…

The Halberd…we already have it in Chrome. It came with Mythic Legions Dark Knight Templar. But this is a different color. Be careful not to scratch the paint off of it getting it in Head Hunter’s hand. I haven’t had this accident, but it seems like it could happen.

Does he glow….NO. (Sadness)

That said, the white coloration really takes to colored lights. He looks best under pinkish, purple-ish light.

COMPARISON

First, let’s put him with Scare Glow. MASTERVERSE Scare Glow does glow in the dark. It is also more reactive to the blue light…that light energizes the glow in the dark paint on his ribs. But we could say that Headhunter is stronger as a figure as his whole body reflects that light, it just isn’t a phosphorescent effect. (Good job SpartanNerd. “Phosphoresent…”). And just like Scare Glow, I don’t see how people can confuse him and Skeletor. I get it…some kids only had “generic” or “off-brand” Skeletor. This is what they had to get because they couldn’t get the real thing. But other than a skull head, they don’t look alike.

PICTURED: MASTERVERSE New Eternia Bone Throne, MASTERVERSE New Eternia Battle Armor Skeletor, Four Horsemen Studios Warrior Beasts Head Hunter, and MASTERVERSE Revelation Scare Glow.

What about other Grim Reapers?

He has an alternate head that goes perfectly with Mythic Legions, so try putting that other head on Maxillius the Harvester…but set Maxillius to classic mode by removing the awesome blood wings, and check out how you have kitbashed a “Bill and Ted’s Bogus Journey” Grim Reaper!

Heh Heh. Black Falcon lost his lunch again!

Here he is with most of my other skeleton figures

Funko Magic the Gathering Liliana commands her undead army. PICTURED: Demistros, MASTERVERSE New Eternia Skeletor, MASTERVERSE Revelation Scare Glow, Mythic Legions Skeleton Legion Builder, Mythic Legions Skeleton Legion Builder II, Death (From Marvel Legends Thanos), Mythic Legions Maxillius the Harvester, Four Horsemen Studios Warrior Beasts Head Hunter, Super7 Ultimates Black Falcon. You can find reviews for all of these at SpartanNerd.com, except for Liliana.

As with all good action figures, you can do some cool stuff with Photoshop. This took like, no effort, but terrific effect! I used ToyPixx’s recent “graveyard” backdrop, and green screened Head Hunter, layered him on the graveyard and made him a little bit transparent.

I just moved into a new house, and I kind of walk around in my yard in this same way.

SPARTANNERD’S RATING OF FOUR HORSEMEN STUDIOS WARRIOR BEASTS HEAD HUNTER

At the beginning of my review, I asked the question, was this worth my $40? Kind of yes. But also…kind of no.

He’s cool and scratches a kind of nostalgic itch even for a guy who never owned this as a kid. A color variant of Scare Glow is a nice thing to have. And if you go back and look at old pictures of the original, the Four Horsemen have updated him perfectly. “The feels”… he gets this point because I felt like I saw something I just knew I needed when I saw it.

I’m not a “parts collector,” but someone who is might be upset that there is nothing new here. On the other hand, maybe someone wants those white boots and that white cape could definitely be used on other figures. The accessory count here is just sad. I’m always joking about Super Seven Ultimates! Black Falcon, but that figure came with more accessories than any other just about, and he hit that same generic “feels.”

Lost your lunch? Let’s eat the SpartanNerd’s food. PICTURED: Super7 Ultimates! Black Falcon and Four Horsemen Studios Warrior Beasts Head Hunter. Also Mythic Legions Evil Magic Effects on the halberd. And a frozen turkey sausage English muffin.

I am awarding Four Horsemen Studios Warrior Beasts Head Hunter a 4/5. He is a nice update on a generic figure from the 1980’s, but he needs more accessories. It is a great thing to add another skeleton to my collection, even if he has that “Karate Kid” skeleton costume vibe. Sculpting, paint, articulation, all this is good. But he just needs more accessories, and this is where he loses a point.

Do you agree or disagree, Hub City Geeks? Let me know in the comments! Did you own this as a kid? Let me and the world that reads the SpartanNerd blog know!