Tag Archives: Beast Man

FIGURA OBSCURA The Mouse King- SpartanNerd Review

by

0

Check out the video version of this review here.

NOTE: There is a secret item in this box that I review here. I placed that part of the review at the very bottom after the rating to prevent anyone from getting this spoiled.

This is my third item from this Four Horsemen Studios line after Figura Obscura Father Christmas, and Figura Obscura Sun Wu Kong the Monkey King. The FH just keep cranking out the hits. I thought for sure we would get a Ghost of Christmas Present, which would probably be an Ogre sized Santa. BUT…two years ago when the Father Christmas just came out, I’m pretty sure I heard Eric Treadaway saying something about the Mouse King. Looks like that came true!

I got an e-mail, of course, that featured some Christmas ornaments and presents on Black Friday. I mentioned it to the Spartan Wife. I spoke with the kids about it. I wondered what it would be, and would I get it. I passed on the Ghost of Christmas Past last year. She’s a pretty figure, and very Christmas. But there just isn’t much use for her in my collection in any alternate way besides some kind of bride. She is an unnaturally pale female under that dress, so I don’t have any further use for her parts. (Turns out the FH re-used the body for a figure of Nymph/Churl that hasn’t been released yet. This mixes parts of Ghost of Christmas Past with parts of Belualyth.)

But when I saw the Mouse King, I knew I had to get it. And it was a small window. In fact, the “All In” Package, that I got for an additional $15 that contains a coffee cup, a Christmas card, and a Fig-pin did sell out by 10:30. So I made the best call.

It’s true I have seen the Nutcracker ballet as well as experienced this as concert music several times. But I am not a Nutcracker Super fan. I like it OK, but Ballet isn’t my jam. I usually use the Sugar Plum Fairies theme when I play NES Tetris. And truly, besides some Trans Siberian Orchestra, that is my fandom for this work. Romantic Era Russian Nationalist classical music isn’t really my preference. (I say Beethoven was the greatest, you know 30-50 years earlier and German). But this figure…the presentation of the Mouse King as a seven-headed villain. This was too good to pass up.

I unboxed this on film, so please watch the video to see the rundown of this terrific box. But here are some more details.

PACKAGING

The packaging works very similar to what we got with Father Christmas and The Monkey King. There is an enclosing “book” capping over the box. This makes for collector friendly packaging and adds worth the the figure for displaying.

The front outside image on the capper gives us a good comic image of the figure, with gold foil details. As you wrap around the box you can see a whole Christmas setting where the battle between the Mouse King and the Nutcracker would take place.

The capper has a backdrop on the other side, giving us a scene inside a grandfather clock. Apparently the Mouse King’s lair. He has a little throne made from a compact mirror and some makeup items. There are books, some kind of snake or cat skull, giving us some context of some of the king’s past victories maybe, and an oil lamp.

Removing the capper from the box reveals the inside box.

On the inside box you have a picture of the Nutcracker and some lady I don’t remember. I’m pretty sure she isn’t the girl having the dream, as that is a child. So I don’t know who this is. One thing about the Four Horsemen showing us this picture…it is taking away some of the mystery of how they might design a Nutcracker to pit against the Mouse King in the future. On the other hand, Nutcrackers are easy to come by, especially in this size and scale, while Mouse Kings are usually missing in action. (Other fantasy villains for Christmas, right? Krampus. The Grinch. Jack Skellington.)

The back has information about the Mouse King. I haven’t read it, I confess. (There is also a booklet inside that I only glanced at. It appears to be a re-telling of the Nutcracker story.

One more thing…

Behind the figure we have yet another backdrop piece which is a clock face, featuring two swans. I don’t know the significance of these two swans, but it made me think of the Swan theatre or something like that Wagner was famous for putting on performances for King Ludwig (Is my history right about this? And if so, does it have anything to do with the Nutcracker?). I already imagine I will use this to remake some Earl Norem photos from the Golden Book “Time Trouble.”

Normally I talk about how you can see the figure inside. Nope. Not this time. They put opaque plastic over the figure so you can’t see him in the blister. Maybe the FH studios thought this one might just be too creepy to see on a store shelf?

FIGURE REVIEW.

What do we get in the package? It is a double blister, and this feels like more stuff than either Father Christmas or Monkey King. Like, more plastic and paint straight up. It weighs more.

  • The Mouse King Figure
  • Alternate neck
  • Alternate frilled collar
  • Pair of alternate clawing hands
  • a scepter
  • a sword
  • a reversible cape
  • a flight stand (what?)
  • and a mystery trash bag. (See the end of the blog entry to know what you get here. NO SPOILERS!)

How does the Mouse King work

I was very cautious this time. I have had a recent spat of problems with Mythic Legions figures. The Monkey King had a lot of problems. Last month, though, I broke Maxillius the Harvesters neck. There has been another recent Cosmic Legion that I will be blogging about soon…and so…I didn’t take any chances. I got the hairdryer out first before I removed any parts.. And thankfully nothing has broken or been too difficult to manage.

He has all of the articulation you expect, but this time he has a huge harness with seven mouse heads on it. Five of these heads are the same. There is one savage rat head with bared teeth, and then there is the king head with a crown of seven bones. This piece by itself weighs as much as the rest of the figure. Luckily, they gave him big feet, but this time with reversed knees, which are anatomically true for a rat I’m pretty sure, but the more I pose him and mess with him, the looser this has become. He also has a tail that works exactly like the Monkey King’s tail as well as the Ninian Infantry tail. In other words…it is bendy and very posable, BUT it doesn’t want to stay in the hole. It did better after I hairdryered it, but it still isn’t reliable. Which is a shame because like real rats, that tail would help him balance.

But…stop SpartanNerd. You are getting ahead of yourself! This sculpt is AMAZING! Of course it is the Four Horsemen Studios work. There are so many details here that just show tremendous love for the subject here, and so much care for their fans. This harness has a gruesome SPINE on the back, and tipped with a violent spike. Where have we seen this before? This is a throwback design from Todd McFarlane’s Spawn…the Violator and similar characters had these spikes.

The Mouse King and the Monkey King do battle at the good-guys office Christmas party. You can see the harness very well, with the five regular heads and the two other heads: Savage and King. Also, you can see how large the cape is. AND the tail. You can find reviews of most figures pictured on the SpartanNerd blog and the SpartanNerd YouTube page.
PICTURED: Masterverse New Eternia Beast Man and Mythic Legions Belualyth. Both are beast masters who control animals.

You can easily remove the harness like any other Mythic Legions head, and this gives you the option to make just a generic mouse or rat warrior. And so…the Mouse King can be used all year long, not only just at Christmas! (Well…a Mouse King can be used anyway all year I suppose.)

You can see in the photo above, I believe the only re-used parts on this figure is the chain mail loin cloth. Maybe the sword is also re-used from a previous figure. Maybe the hands are the same as the Monkey King’s?

Something new to point out about the torso. This figure has new butterfly joints in his shoulders, giving us the ability to make even more dynamic poses with our Mythic Legions. The Mouse King is the first, but evidently all new releases going forward will have this! I have found them to be really tight, and was sure to use the hairdryer. But I had no problems.

PICTURED: Figuara Obscura The Mouse King and Super7 Ultimates! King Conan. Both are doing battle to see who the real king is. If you look close, you can see the Mouse King has a stripe of blood on his face. And King Conan’s gigantic sword is dripping with blood.

Maybe they can just get along.

PICTURED: Figura Obscura Mouse King and Mythic Legions Ninian Infantry.

You can reverse the cape also, which gives us a different look. I find that in the photo above, some kind of nerve for “The Secret of NIMH”, a movie from the 80’s/

SPARTANNERD RATING OF FIGURA OBSCURA THE MOUSE KING

He earns a 5/5 hands down. Definitely one of the greatest figures of the year!

Here is my metric.

  • A point for sculpt
  • A point for paint
  • A point for articulation, especially with no stupid problems. (OK. The tail)
  • A point for accessories
  • A point for what he stands for as a unique action figure

No QC problems this time. AMEN! says Reverend SpartanNerd. (The hair dryer really improves the tail). And you can use this figure year round as a generic rat warrior creature.

Do I wish anything was different? Well, I think they will offer this in a different color some time in the future, probably brown. You might be able to do an homage to Master Splinter in this way. I also wish the seven-headed harness could be used on other figures. The way they did it, they sculpted the frilly collar onto the harness. Additionally, there is a small piece of mouse neck on every hole of the harness. So this head really only can be used for the Mouse King. And one more thing…mind you that these are not complaints…only some things that could improve it even more. We could have been given a mouse rear end. What I mean is…a regular rat body that you could put a head on. Surely in some future we will have this, but if we were given even only one, that would have been something else awesome.

But the Mouse King is awesome as he is! 5/5!

NOW IF YOU WANT TO KNOW THE SECRET ACCESSORY…KEEP SCROLLING. OTHERWISE

TURN

BACK

NOW!

!!!!!

!!!!!!

!!!!!!

!!!!!!!

YOU WERE WARNED!

A Nutcracker head! Here I have placed it on the Kitbash Bros. Gamecocks Knight. There is no Nutcracker body, so you can put him on whoever you want. You could also have it as a severed head beside the Mouse King, which was my first instinct. This head looks battle scarred and beaten, with an eye missing and just some busted up details!

Just something else that pushes this figure over the top! Thanks for reading! Like, subscribe, comment…check out my YouTube channel! Merry Christmas!

GAMECOCKS Knights- “Kitbash Bros.”SpartanNerd figure reviews and customization project

by

2

Way back. WAY back….WAY BACK in February (2025) there was this magical event called “The SCMEA Conference.” (Happens every year.)

I took this couple of days of staying in Columbia South Carolina to do a bevy of figure reviews. I reviewed MASTERVERSE New Eternia Evil-Lyn, the Mythic Legions Ninian Infantry snake warrior guys, and the MASTERVERSE Skelcon. But I also began this project, that I eventually named “Kitbash Bros.” I wanted to wait until football season to release the review, so here we are on this season opening Labor Day weekend of 2025.

The Four Horsemen Studios had just released their wave of Legion Builder knights figures. These were a lot of the same knight over and over in different colorways. Most of them. (These are still on sale on their store…you should go take a look). Truly most of them are the same figure. There seems to be an “evil” and a “heroic” type, with some varying helmets. But the striking thing is the different colors. But then there was the Red Leather knight. He was different. And when I saw him, I knew it was time to get crafty.

I had been collecting knights, along with skeletons, barbarians, and apparently non-mythic legions females. (It’s true. My uncles should make fun of me for all of the Evil-lyn, Teela, Sorceress figures, etc). So I had Sir Godfrey and also a Gold Knight. And also the Xylernian Guard, more of an archer but still similar. When I got Sir Godfrey, with his “Knight Templar” motif, I noticed a dark version…”the Dark Knight Templar.” What’s more, he was far cheaper than Godfrey. But I decided to hold off.

But Red Leather Knight…Dark Knight Templar…SCMEA Convention in COLUMBIA South Carolina, home of the Fighting Gamecocks…FOREVER TO THEE. See where I was heading? I could in theory combine the pieces of the two knights and make an ultimate “Gamecocks Knight!” (There was a proper “Gothitropolis Ravens” rooster kind of in Gamecocks color. But who has that? A true mascot figure.)

(The Gothitropolis Ravens are dream figures…I felt priced out and this was one of the reasons why it took me so long to get into Mythic Legions)

I said “began” at the beginning of this post. Keep reading to see how this turned out.

(Post Structure: Dark Knight Templar review first, Red Leather Legion Builder next, then Kitbash Bros)

DARK TEMPLAR PACKAGING

The Dark Knight Templar came in the usually collector-friendly packaging. You can see the figure inside very well. (I am in a hotel room, where I have made a photography table out of the end table and a book light that was attached to the bed…I did the same thing with Evil-Lyn and others that I reviewed in this room). Perhaps notable is I don’t think sourcehorsemen is a website anymore, showing the age of this figure. (I believe this was among the first figures labeled “Mythic Legions,” so Gen 2 knight after the ravens)

The back has this image. And I don’t think I have seen this image before. It shows all the guys who came out in the wave kind of lined up in a battle formation. And there were eight figures in that wave…impressive. The only one I think I have seen is the goblin guy. Maybe the bearded guy on the bottom. The ones I have seen are probably re-issues (All Stars waves)

Here is everything you get.

  • Black Knight Templar figure
  • Halberd weapon in two parts (pole and axe)
  • Shield with the Templar Cross in black and white
  • Shoulder pauldrons of a smaller variety than usual
  • A regular knight’s sword, with a scabbard
  • a leather weapons strap.
  • Also notable…those “wings” on the helmet are removable.

So this figure works exactly like Sir Godfrey. But he has those wings on the helmet. (fins? horns?)

This was my first time with the halberd…a weapon that I would see again. This time it was in chrome. The pauldrons snapped right into place with little effort. So that’s unexpected.

BUT…the scabbard. Such a rare accessory. I was excited to see this! But sadly, the connector on the back of it came off with the tiniest of effort to get it on the weapons strap. BOO! But this would prove to be the only real problem with the figure.

Sculpt and paint. Great! (1 point)

Accessories. Great! (1 point)

Articulation. Very nice (1 point)

Stupid problems– easily broken scabbard. (no point. BOO!)

The Feels. I am going hold this point until the project is over. The purpose after all is to make a Gamecocks Knight! (? Point). But as a standalone figure he seems like he would work well in Elden Ring.

RED LEATHER KNIGHT PACKAGING

Once again, classic Mythic Legions packaging. BUT…this time we have foil lettering. NICE!

The back notably doesn’t have a cross-sell on it. Instead we get what I think is the same image that came with the Heroic Magic Effects, but with a foil Four Horsemen Studios mascot on there. There is a bio on the back. And basically “choose your armor and select your weapons”…is the cross-sell. They want you to go buy a whole mess of these guys. (You can buy the whole set for $450 or individuals for around $45)

I have installed the pauldrons, the belt, and the weapons strap already.

Here is everything you get

  • Red Leather Knight Legion Builder
  • A pair of pauldrons
  • A weapon strap (the usual)
  • A belt with leather strips
  • A shield
  • A mace that has two options for a head
  • A sword with scabbard
  • An epic sword
  • a pair of fists.

So let’s characterize this figure as the newest knights build, maybe gen 3, as opposed to the dark Knight Templar which seems to be pretty old. These pauldrons went in easier than any other mythic legions I have, including the Ninian Infantry. Right away, this was noticeable. The sculpt and paint on this are remarkable, especially since the price was fairly low. Every rivet has a gold paint hit. He is a little more glossy than I expected…I consider this to be ok, but maybe it takes away from the idea of “leather” a little bit. The head is the same knight’s head that came with Father Christmas, and I think this is the first figure to use it. I mean…look how awesome he looks. And this is without discussing the accessories.

The shield…Let’s just say this shield puts the MASTERVERSE shields to shame. It is the same shield that came with the Undead of Vikenfell, only in gold and gray. Why are there two swords? One normal knight sword, and the other epic “greatsword?” The weapons strap has a gold buckle paired on it (yay!) and the leather belt has more leather bits hanging down. If you played Skyrim you know you can use leather bits like this to improve your armor. The mace has the same head that came with the mace the Ninian Infantry had, but this time with gray and silver “enamel (wrong word?)”. The alternate is a classic iron ball with studs. So there are paint hits on every stud on the figure, and studs on the weapon. So is this guy a … stud… (Don’t ask me!)

Sculpt and paint. Great! (1 point)

Accessories. Great! (1 point)

Articulation. Very nice (1 point)

Stupid problems– Well, I was extra careful with that scabbard. But it is the exact same piece I assure you and has the same stupid problem. BUT. I am aware of it and had no breakage. So I won’t mark down on this one.

The Feels. I am going hold this point until the project is over. The purpose after all is to make a Gamecocks Knight! (? Point). Same comment as above…he seems like he would belong in Elden Ring.

THE PROCESS OF CUSTOMIZING

After I took the photos above, I got to work customizing. And I went ahead and got out the hotel hair dryer. (I didn’t want any incidents like happened with The Monkey King.)

I sat in the floor of the hotel room with all of the pieces disassembled. Right away it is obvious that the Red Leather Knight is more easily modular than the Dark Knight Templar. I don’t know how many years separate these two guys, but the Legion Builder seems to want you to take him apart and re-arrange him, while the other more legendary figure seems to fight you. I didn’t need the hairdryer on the Red Leather Knight, but I had to use it over and over on the dark knight templar. And then…as I began to re-assemble them how I wanted, Dark Knight Templar did NOT want to play well. I had to use the hairdryer again and again. And I was starting to get tired. So I put it in a box and took it home to work on over the next weekend.

…ONE WEEK LATER…(I hoped to do this quickly. Oh well!)

I got them together how I wanted, but they still weren’t “Gamecocky” enough. So I went to the store and got some magnets (no sports stickers at Dollar General Market?) and adapted one for the blank shield that came with the gold knight. Some time during the COVID crisis, I built a Master Grade Epyon Ver Ka model, and used glossy reddish-purplish paint. I used some of this. And so I now present (you probably already saw it as the lead image to this post)

TWO GAMECOCKS KNIGHTS!

I hit the Dark Knight Templar helmet with some … let’s call it “garnet” highlights on the wings and on the cross of the helmet. (Sir Godfrey has a gold cross in the same way). I’ve swapped legs pieces, shoes pieces, and arms pieces to even it out, and they both appear now to play for the Fighting Gamecocks!

And so, in memory of when Carolina defeated Clemson on November 30, 2024, with a score of 17-14, and also in honor of todays (August 31, 2025) win over Virginia Tech at the 2025 season opener, (24-11)…

SEE WHAT I DID HERE?

PICTURED: Garnet and Black vs. Orange. Kitbash bros and Cosmic Legions T.U.5.C.C Pilot vs. Cosmic Legions Wal-Torr the Mad, MASTERVERSE New Eternia Beast Man and Snout Spout.

SPARTANNERD RATING

Is it fair to rate my own project? No, what I am rating are the two action figures, and including whatever my project accomplishments were to “the feels” score.

Dark Knight Templar– This one gets 4/5, losing a point because of the broken scabbard. A scabbard is kind of a rare piece, and I was excited to see it, but so disappointed that it broke when I was just using it normally. The sculpt is great. The paint is dark and moody and great. Who doesn’t love the black knight? An iconic character re-imagined as Batman and also as Darth Vader. He did give me some problems with being a modular figure…all Mythic Legions are modular with swappable parts. But he fought against me. Just the same, I was able to get TWO Gamecocks Knights, so 4/5.

Red Leather Knight– This one gets all 5/5. Awesome paint for a Legion Builder…a figure meant to be bought as an army. Great accessories, though two swords is a head scratcher. I especially like the shield, and he looks very “football” really without even doing anything to him. Easy 5/5. And it was his parts that made the TWO Gamecocks Knights that are the KITBASH BROS.

Do you agree or disagree, Oh Hub City geeks? Let me know in the comments! Like and subscribe also the SpartanNerd YouTube Channel!

(Sorry for not many reviews lately…Summer Vacation is over an all that, but I have several things coming soon)

MASTERVERSE New Eternia Roboto

by

2

This blog entry has been a long time coming…I have had Roboto for about two weeks. But I have been moving. So moving, plus a real paying job, means that the SpartanNerd side-hobby has to take a back seat. But it will all pay off. I am retiring the Nerd Closet and will be updating to a Nerd Studio, with dedicated space for collecting and doing YouTube videos!

I took this photo on a blue bucket with stuff getting moved!

Roboto came in the standard MASTERVERSE Transformers style package. And this time, with Roboto, it doesn’t even feel weird typing those words. (ROBOT-OH, for the slowbees). You can see the figure very well in his window box with a purple mask and what would have been an axe on the vintage figure, now is a buzz saw thing. The artwork, by contrast shows Roboto wearing the alternate red mask, and using a cannon on his left hand and that whirly blade on the right hand. And this is a point. This version of Roboto will let you change either hand into an attachment.

He is firing on some rock warriors…not of the species of Rockon and Stonedar, but of the generic guys from the Filmation show. If you look close, you can see part of a Roton. Earl Norem gave us perhaps the most iconic Roboto picture, where he is firing on a flotilla of Rotons

Like the other MASTERVERSE figures from the past few years, you kind of turn the box to the right and you get more of the image.

Around here on the side, we see where the rock men are coming from…Skeletor of course. Now this appears to be “the Vintage Collection” Skeletor…a figure I don’t own. But he looks that way I think because the Havoc Staff has the more vintage inspired shape. And those abs also seem to be more 1982.

The other side panel has the reference section material for MOC collectors or people who store the boxes. (I save the boxes for a future project…don’t know what.). A picture of Roboto with his portrait at the top. As usual we see both looks you can give him.

And then the back.

So this is one of those photoshop pictures. HOLY COW. I have this diorama! It looks to be Extreme Sets “compound display pack,” and so I am going to photograph Roboto using that very thing! (some of my photos are the final shots from The Nerd Closet). Seriously…”The Compound” has always given me Technodrome vibes, or Decepticon Base vibes. But look how this purple and colorful computer scene works with Roboto.

As usual, this is just a photoshop picture of the toy. But this is the first time on the package we have seen the claw. The little instructional panels show the gun and the buzz saw. Roboto has a wheel on his back that makes the gears in his torso move.

The small portrait on the bottom tells us his New Eternia bio. He is controlled by Skeletor in this story. But not in my story!

There is cross sell at the bottom. When I ordered Roboto, I actually ordered King Randor also. But I canceled that. Maybe I will still get it. But I am moving and need to pull back a little unless I just NEED a figure…And as for Beast Man…this is the ugliest beast man I have ever seen. Already there was a terrific New Eternia Beast man. What does this one do for me? Nothing. (but I bet it is better than the movie Beast Man!)

FIGURE REVIEW

I set up Roboto a little “room” using the Extreme Sets “Compound”

Here is Roboto with all of his stuff. Mind you…I prefer the red mask, and have replaced it here after playing with the figure for a few hours.

Here’s what you get in the package.

  • Roboto figure
  • Removable face masks in purple and red.
  • Extra right hand
  • Claw attachment
  • Buzz saw attachment
  • Lazer gun attachment.
A back view of the above photo. Notice this wheel has a peg hole for one of the more recent shields, but he didn’t come with a shield.

There’s a lot here to consider. The first thing I looked for when I took him out of the package was the heart in his chest. I had the vintage toy, and to me this was a main feature of the character. Indeed how he is often portrayed. A machine with a courageous heart. The promise of a living robot. Not just a cold calculator. BUT…no heart here…so…

This doesn’t make the figure stink for me or anything. I just prefer my Roboto have a heart. Now I could go with that New Eternia story…Skeletor has it. Yeah…that must be it.

(That heart was the backup unit. See the Futurama episode “Lethal Inspection.” And once again I out-nerded you readers!)

So as mentioned on the package, you turn the wheel on his back and the gears move. In the vintage figure, you twisted the waist. And this made the gears move BUT only very limited. This mechanism is an improvement. EXCEPT in the 1980s, Roboto’s mask would also open and close as if he was talking when you moved the waist. That functionality isn’t here. I will argue that this is still a better design, and what they did with the face masks is much better.

You can remove the face mask and see … mechanical skull teeth underneath. OH YEAH!

Totally Terminator!

As I mentioned, you can swap between a more modern purple mask reminiscent of a villain’s color or a more vintage red mask. But that MECHANICAL SKULL IS AWESOME! And I didn’t expect this. You see…this is why New Eternia is the best current Masters of the Universe line. I feel a little jealous about the Origins line having more characters…they look cool and would be cool to collect. But the New Eternia segment of MASTERVERSE absolutely is killing it when it comes to hardcore fans.

And the more I look at this figure, the more I wish I had another one to take apart. Like…after you remove the mask, it seems like the remaining translucent plastic over the cranium should be removable. You can see the robotic “brain” in there, that actually resembles a hard drive! It also looks like he has sculpted eyes that are covered by the blue visor. Absolutely…I am thinking about getting another one to take apart! I also like that I can see the “t-joint” that holds the arms in place. It makes me wonder if this is how all MASTERVERSE figures are put together.

All of this is pretty great, but from the waist down…he is the exact same as Trap Jaw and Man-E-Faces. Boots with knee pads and all.

“We rode the bus together and got off at the same Goodwill store to shop for pants. It is part of the work uniform.” Notice Roboto has two normal hands.

ACCESSORIES

Speaking of Trap Jaw, Roboto and Trap Jaw can share accessories. This was a feature I REALLY WANTED in the 1980s. Why the toy designers didn’t let us do that I guess we won’t know.

These guys are probably arguing over who looks better in the pants. Because their pants are the exact same with different colors. Complete with “Made in China” stamped on the behungus.

The three accessories that came with Roboto…the claw is huge and has closing motion. The buzz saw has windmill spinning action. But the lazer gun…that looks like a paint sprayer or something. And all of the accessories, especially the gun, need some paint.

We also have the option to display Roboto with two normal hands. Which I think is a first time. (I don’t know about MOTUC…unlikely.)

Clawful: “I use mine to attract mates.” Roboto: “I use mine to crack shellfish”
Roboto can clamp someone’s leg AND get the buzz-saw ready! PICTURED: all New Eternia toys. Roboto, Man-At-Arms, Battle Armor Skeletor, the Havoc Throne, and Panthor.

SPARTANNERD RATING OF MASTERVERSE NEW ETERNIA ROBOTO

This is once again one of those 5/5 ratings. Just WOW!

The sculpt…while these are the same legs as some other people, I should say…the design of the mechanism and the delivery. Absolutely awesome.

It’s true that the accessories need some paint, but the paint of the figure is great on the legs and arms. The translucent plastic design looks spectacular.

And he came with a lot of accessories. And he has a peg hole on his back to store a shield. AND he can use Trap Jaw’s accessories and vice versa.

And no stupid problems. He can stand just fine. Hands swap out no problem. Mask swaps no problem. If anything, the stupid problem is that I can’t take his body apart easily. (Not a real problem!). But wouldn’t that be cool functionality.

And what does he add to the SpartanNerd’s collection? I complained that I didn’t have enough “good guys.” So this is what Roboto adds. I needed him. Notice that is the second time I used that phrase in reference to a MASTERVERSE figure. I needed the ones I had as a child. And while King Randor does look cool, I kicked the can on that one because I didn’t have it as a kid and didn’t want it really either. As an adult, I think it would be great offered with Queen Marlena as a two pack.

If someone was going to get iced by a Mythic Legion, it probably should have been Sy-Clone. But Roboto is ready to avenge him anyway. PICTURED: Masters of the Universe Classics Battle Cat, New Eternia figures Roboto, Fisto, Man-At-Arms, Mekanek, Man-E-Faces, Snout Spout, and Sy-Clone. And you can see the pistol from Mythic Legions T.U.5.C.C. Pilot right in front of Snout Spout. See all these reviews at my YouTube or at SpartanNerd.com. Kind of lazy to cross link all of those.

My point is, Roboto adds to the good guys. The only bad guys I need are Screech and Modulok. I could use some snake men, and they are coming apparently. But of heroic characters, I still don’t have Stratos, Prince Adam, Zoar, Buzz Off, Moss Man, or Zodak. And I could get some of these now, for instance Zodak continues to be on sale but I prefer to wait on the more more modern “Zodaq” design. I have ordered Androphilees from Mythic Legions. etc. Of other good guys I would like to have Rio Blast, Extendar, Movie accurate Gwildor, a proper New Eternia Orko, and a New Eternia Moss Man. See what I mean…lots of holes to fill in the heroic characters set.

So the SpartanNerd rates MASTERVERSE New Eternia Roboto a 5/5. Do you agree or disagree, oh Hub City Geeks? Let me know in the comments!

MASTERVERSE New Eternia Fisto-SpartanNerd Unboxing and Review

by

3

Follow the SpartanNerd on YouTube. Click Here!

Fisto…Total FOMO.

I didn’t have Fisto as a kid. BUT, the character has always resonated with me. A guy with a huge prosthetic fist. That is a cool power! And that it is a metal tank of a weapon.

Back to the FOMO. When they released the Masters of the Universe Classics version, he was one of the first that you had to order online only, and like no one got him. Matty Collector crashed, and just like that. Bots or something snatched them all up when the site came back online, and just like that, all of them were sold.

The MOTUC version was REALLY COOL. He looked awesome, with some 200x flare, which was unusual for the time in the life of the MOTUC line, and also he came with this huge Final Fantasy VII kind of sword….Just an extra incredible detail. And I think that sword was designed for 200x but didn’t ship or something?

And so after-market MOTUC Fisto is a very high priced toy. Then they came out with a kind of lame version for Masterverse Revelation. What a letdown.

When they showed off this new Fisto, I was shocked and completely knew I would be getting it. No regrets this time.

Or are there? Keep reading, Hub City Geeks!

PACKAGING

Fisto comes in this awesome package, this time showing off some cartoon baddies not often seen. These are the orcs from the mini comic “Masks of Power,” where these little monster guys put on the masks and turn into big monsters. This mini comic was the pack-in with Fisto, and so it is a nice homage on the box. It would be TOTALLY AWESOME if they gave us these orcs sometime in the future. And why not? They are doing Skelcons.

The sides also show some of this action, with one panel featuring He-Man throwing one of the bad guys. There are also some notable flying enemies.

The back of course features a photoshop of the toy.

It is a cool addition to the story that he has bonded with the “mystical Iron Fist” in his bio. The three images on the cross sell art…I am passing on Flying Fists He-Man. Never been a fan. And this is the same bad face treatment as Thunder Punch He-Man had. Big Bad Toy Store has charged me for Evil-Lyn, but she hasn’t shipped yet. I expect she might be here before the end of the week. (What is it with me and Evil-Lyn? This will be number 3.)

One more thing. Inside the package is a little bag for his accessories, and I think this is the first time we have this specific style of baggie.

It features the modern font for Masters of the Universe in black over blue.

FISTO FIGURE REVIEW

Here’s what you get in the box

  • Fisto figure
  • Alternate vintage-style head
  • Alternate left hand (fist)
  • Curved sword (cutless?)
  • Battle hammer

The head that comes on him out of the box is an older, more wizened portrait with gray details on his beard, especially coming down from the “soul patch” to the goatee. There is also a mask that reminds me of something from She-Ra. That mask is not removable. He also has a top-knot ponytail.

PICTURED: MASTERVERSE New Eternia Man-At-Arms and Fisto.

The second head is the classic Fisto portrait. Younger and what you expect.

PICTURED: MASTERVERSE Revelation Sorceress, New Eternia Fisto, and their daughter Teela (this is a mash-up Teela) I am following the 200x story here, where Fisto and Sorceress are deadbeat parents and Man-At-Arms has to raise her.
PICTURED: MASTERVERSE New Eternia Fisto rides on Mythic Legions Boreus. It just seems right to have Fisto ride on a horse. This is because he is often pictured riding Stridor, who we don’t have a proper MASTERVERSE version of yet.

This arm is also what is different. Fisto not only has a metal fist, but now for New Eternia has a whole robotic arm. This reminds me of the whole “techno-virus” story angle from the pre-ternia mini comics and more recently from the Revolution cartoon. In other words, watch out. Perhaps Fisto can be easily controlled by the likes of Motherboard and Skeletek.

ACCESSORIES

This is a character where the accessories and the figure kind of run together. The battle hammer has modular business ends. That spike looks like it could do some damage, or at least bust up some ice. The other “dome” end is similar to Man-At-Arms weapon. Now these two pieces can be swapped out. You could just have half a hammer, or you could remove Fisto’s metal fist and swap it with one of the hammer heads.

The other accessory is the purple “cutless.” Not a giant buster sword. BOO! This was a missed opportunity, Mattel! As a weapon on its own without that context, it is just fine. I think it might be a copy of the one that comes with New Eternia Jitsu, (which I don’t have…Maybe I should get?)

SPARTANNERD’S RATING OF NEW ETERNIA FISTO

The sculpt looks good. The paint looks great, with two heads for different looks taking that piece beyond the expected. I DO think the fist might be just a little bit too small (Beast Man, Snout Spout, and Ram Man have similar sized hands.) The accessories are fine even though I wish it came with an anime sword…but this can’t figure in to the rating. It is novel that you can swap the hammer heads with the fist, and as a bonus, Trap Jaw’s parts (and Roboto’s?) can also go with Fisto. And already the pirate hook looks cool, if just a little bit rustier of a finish.

PICTURED: MASTERVERSE New Eternia Fisto and Trap Jaw

And also importantly, he represents another good guy to go with the inferior force that the SpartanNerd has. (Still missing, Stratos, Buzz-Off, Extendar, Rio Blast, Roboto, Moss Man, Prince Adam, King Randor, and Queen Marlena. Yes, some of these exist but not in a proper form. OK, Zoar also.) As a contrast, I have every important bad guy represented except for Modulok and Cobra Kahn. OK, Screech. The Snake Men should be coming out soon in MASTERVERSE, at least there have been hints.

So with great sculpt, paint, accessories, no problems along the QC area or with articulation, and that he represents something special to the SpartanNerd, he gets a 5/5. We start the new year off with a bang of a punch.

PICTURED: Super7 Ultimates! Battle of the Mounds Valeria (Spirit), MASTERVERSE New Eternia Mekaneck, and Fisto. We all know that Mekaneck had it coming…

Do you agree or disagree, Hub City Geeks? Let me know in the comments! Also check out the SpartanNerd’s new video content on YouTube.

SpartanNerd Blog- Best (and worst) of 2024

by

0

I actually did this one as a YouTube video first! So you can check that out here, or keep reading for practically the same content.

I’m not ranking these. They are all great! Someone on here might have gotten a 4/5, but over time have grown to be among the top. So no haters…OK!

FIGURA OBSCURA Father Christmas (review link)

After taking off the red and white costume, and putting it in the terrific packaging for storage until Thanksgiving or Christmas In July…(or maybe some other reason, who knows?) you have a generic elf knight body that you can continue to use all year. YAY!

Cosmic Legions SSKURR’GE (Whiplash homage) (review link)

This thing is just great! Amazing sculpt and green paint. He fits the MOTU need for Whiplash very well. It is just too bad that neither head that he came with really looks like Whiplash. I can find a customized version out there, or maybe eventually something will come out that will work.

Super7 ULTIMATES! King Conan (review link)

I could have put any of my Conan action figures here. I chose the king because he is really different…one of the most “clothed” versions of the character. I could have thrown Thulsa Doom in here easily, though. I have him holding the axe (in the video) from the Battle of the Mounds Conan, just because I like my Conan figures to hold an axe 75% of the time!

MASTERVERSE New Eternia Snout Spout (review link)

I almost passed on this. He was available for so long, and I kept waffling. Then I finally pulled the trigger on the Mattel Creations purchase and I am glad I did. He is HUGE. And that sculpt doesn’t look anything like a “sad Dumbo.” I had the chance over the weekend to pick up the 200x Staction version, but this version is better simply because it is an action figure. It’s true the Four Horsemen sculpt is better, but this MASTERVERSE version takes design cues from that and is superior in articulation and accessories.

MASTERVERSE New Eternia Mekaneck (review link)

You can see that my Mekaneck has more neck than he came with stock. I’ll get to the reason why later…

Mekaneck is just great. That we got all of those neck joints…great! His paint is flashy and his armor is just right. And how they are presenting him story wise is also different, with him now taking on underwater responsibilities, getting him away from just “reconnaissance,” as if that wasn’t important. (reconnaissance is VERY IMPORTANT, Hub City Geeks). And that he fills the essential role of Mekaneck in the lineup of heroes is also very nice.

Cosmic Legions Wal-Torr the Mad and T.U.5.C.C. Pilot (review link)

Hey. My list and my rules. I am including Carolina and Clemson on this one! Both have terrific sculpt, paint, and accessories. AND if I was rich I might army build these guys.

MASTERVERSE New Eternia Skeletor’s Throne (review link)

I could have considered Conan’s throne or Boreus (the horse at the top with Santa) as Diorama pieces, but Skeletor’s Throne is the best. It generally sits in the middle of the bad guys, and any of the many versions of Skeletor that I have can fit well on it.

WHO ELSE SHOULD I HAVE INCLUDED IN MY VIDEO? Probably Snake Sorceress Teela, (who I call the Green Goddess.) (review link)

NOW FOR THE WORST OF THE YEAR. (review link)

MASTERVERSE New Eternia Sy-Clone

Remember when I had more necks for Mekaneck? That’s because Mattel Q.C. Sent me another copy of him to atone for the missing mask on Sy-Clone. Mattel didn’t bring us a product that matched past versions…no lenticular sticker on the chest like the vintage one, no ring on his back like the 200x and Classics version. What was supposed to be new and different was that mask. They included these fire effects that can fit on the shield or on his wrists, and they are cool, but they should be IN ADDITION not in place of. He just feels uninspired to me, and with the missing mask, I feel this figure is one of the lowest of the year.

MASTERVERSE Movie Beast Man (review link)

Ugh.

He looks like the salesman for beef jerky or the Geico caveman. He doesn’t look like the movie representation. They should have gone with rooted hair and more of a Grizzlor approach to have done him right. Now we probably won’t get another version of this in the next 15 or 20 years. And that makes this an extra bummer. The design choices of making those hair-mats out of plastic armor pieces…I hope we don’t see those again. And that armor is kind of crappy. And the face sculpt is off. I hate to be negative, but WHY? Probably has to do with rights, etc.

SO DO YOU AGREE OR DISAGREE, HUB CITY GEEKS? LET ME KNOW IN THE COMMENTS! Also, please support the new YouTube video formats coming for 2025.

New Eternia Mer-Man-SpartanNerd Unboxing and Review

by

5

So, I already reviewed a modern Mer-Man, didn’t I? (Yes. HERE)

My complaints about that figure were the sculpt and the accessories…It was based on the Revelations cartoon rather than vintage sources. Well as you can see, New Eternia Mer-Man solves some of that.

PACKAGING

The top picture shows the typical recent MASTERVERSE packaging. I love this art, and it also features a giant pink octopus. That octopus is very typical of Mer-Man, but I can’t help but think about Aquaman. (The SpartanNerd is a longtime Aquaman fan…from the Superfriends to Jason Mamoa. I always wanted the MOTUC/DC collaboration. I missed it though 😦 )

The back also shows more of that octopus. Once again, I am complaining that this is a photoshopped image of the toy and not more illustration. Furthermore, this specific picture makes him appear too “muppet” ish. It is because this must have been a prototype with a more closed mouth. So Fozzy. We get some action shots of the weapons and also a little profile picture with “MER-MAN: Ocean Warlord|With New Eternia shattered into thousands of islands, Met-Man terrorizes everyone foolish enough to travel the oceans in search of Castle Grayskull.”

Flavor text. Magic the Gathering Cards and descriptions of items in Elden Ring. Mattel has caught on.

The cross-sell images. I have Masters of the Universe Revolution Sorceress Teela (review), but have passed on the Man-Of-War. Battle Armor Skeletor is a bag of hurt. I missed it. I currently have a pre-order at Entertainment Earth for it…maybe January sometime. The truth is I pre-ordered this whole wave on “Backorder” with them. Then got frustrated. So I went ahead and picked up Mer-Man at Target and got Sorceress from Amazon.

This side illustration shows how ugly he is. YES!
I like this extra illustration showing Man-E-Faces doing something useful.Throwing Beast Man into the water.

WHAT DO YOU GET IN THE PACKAGE

Contents:

  • New Eternia Mer-Man figure
  • Ocean Warlord spear
  • Coral sword
  • Pair of swimming hands

What do I wish it came with? A TRIDENT. A fish monster friend. An alternate head.

NEW ETERNIA MER-MAN IN ACTION

Here is New Eternia Man-E-Faces throwing NE Beastman into the water on top of NE Mer-Man. This was a really hard picture to get. Everything kept falling.

Notice the “bump” on the coral sword. (Most of us call this the corn-cob sword.). That stupid bump is so you can mount the sword on a hole in the back of the armor. Which would be fine if it didn’t look stupid.

Comparing the older and the newer. Really, not fair. Revelations Mer-Man has that “play-doh” color scheme when compared the paint on NE Mer-Man. He was based on the cartoon, so he has those scars and stuff which is fine. But compared to NE Mer-Man that one now appears to be generic side henchman. NE Mer-Man also has a much glossier finish. The head sculpt is far better. And don’t think these two share parts…Maybe the feet and hands are the same sculpt?

We don’t see a lot of combos between these two. I wonder why? (Also notice Mekanek is using his new underwater scouting role)

This trident came with Cosmic Legions SSKUR’GE. A weapon befitting the ocean warlord.

SPARTANNERD RATING OF NEW ETERNIA MER-MAN

I need to consider this product objectively, separate from the version that came before. If you read my previous review, you saw I awarded a 3/5. In that context, this is a strict 5/5 improvement. If you are ever given the choice of the two to have, unless you are just a huge fan of Masters of the Universe Revelations I don’t know why you would choose the earlier offering.

So let’s ignore that. New Eternia Mer-Man has a monstrous green paint scheme, with nice paint details, and the grading between the green and yellow on the arms is one of the elements that brings the whole thing together. The armor is meticulously sculpted, bringing that “corn-cob” of scales feeling into it all. The spikes around his collar make him fit with other NE villains like Beast Man. The actual face of the actual toy is an evil look with nice fins on the face. His articulation is pretty much exactly like every other MASTERVERSE figure. He does have single hinge elbows, however.

The accessories…That spear is very savage. Like I said…I prefer a trident for this character. The coral sword looks good on the front, but that stupid bump can’t pass as anything but poor design. If they had done something like paint it red or made it somehow a power gem…that would have been very cool. But it’s just an ugly peg. And that’s where this figure loses a point. I would have preferred a scabbard, or a loop on the armor, or nothing at all…this bump was a conscious and irresponsible design choice.

So SpartanNerd’s rating of New Eternia Mer-Man is 4/5. A strict upgrade over the Revelation Mer-Man. He could use an alternate head, some other accessory like a sea critter, and some other way of mounting that sword on his back that doesn’t compromise the sculpt of the toy.

4/5. Do you agree or disagree, Hub City Geeks? Let me know in the comments!