There was a bevy of announcements back in April, 2024 for MASTERVERSE and also Origins. Maybe these were a leak, and then Mattel just went ahead and made official announcements? Among this news, I ordered New Eternia Thunder Punch He-Man. (I also ordered New Eternia Skeletor with throne!) And I was surprised to see it ship in May. What are the SpartanNerd’s thoughts on this interpretation of the classic He-Man variant? Keep reading!
PACKAGING
Watch the SpartanNerd’s commentary on the packaging HERE.
I really did enjoy looking at the box for awhile. What I didn’t mention was it looked like He-Man was “sticking out his gut.” And indeed, when I took him out of the box, I was dumbfounded that his torso WOULD NOT MOVE. I got a little bit of bowing back even further…and this exposed a definite “daylight” in the ab crunch. I was so upset about this, I left it on the kitchen table and would mess with it every few hours. Then finally, I broke out the hairdryer. IT DIDN”T WORK! So I looked this issue up, and apparently on Reddit some people have had trouble with Tri-Klops. The solution was to just run hot water over the figure while holding it upside down. The water will penetrate the joint and allow things to loosen up. And am I glad this worked! It was bothering me seriously. Like, I was ready to categorize this figure with Marvel Legends Thor. He-Man can’t have issues like that! But with the ab crunch corrected, I decide to get in more photographs.
CONTENTS
Here’s what comes in the package:
Thunder Punch He-Man with backpack
New “power-up” bracers
gold Power Sword
classic Thunder Punch style shield
2 fake caps, one gold and the other red
yellow fireball punch effects
alternate hands (2 punching, 2 gripping)
Lots of accessories, but, with some extra functionality.
PLAYING WITH THE FIGURE
Let’s look at the back of this figure first. The backpack is what Thunder Punch He-Man is all about actually anyway.
What you do is you open the backpack and place one of the caps in. I prefer the gold one in the backpack because it adds a little pop of color. This serves no function except for nostalgia. There is a small window where you can see the caps in there, but you can only barely see them and then only when viewed from the top angle.
With the backpack closed, you can see this knob. And this is also a throwback to the 1980s. This knob has a satisfying ratchet sound effect and feel when you turn it. There is a hole in the middle of the knob which serves an additional purpose.
You can put either of the caps in the shield for storage and aesthetics, and also the sword which I definitely remember from the vintage days. But the ability to store all of this on his back is new, as is a welcome improved detail which should have been a no brainer. I suppose you could look at this differently though. Unless another figure comes with a peg hole in its arms or back, this shield can only be used for Thunder Punch He-Man.
As usual, you can see where the armor straps are coming loose with really minimal play. (All I did was open it and put a cap in.). Not horrible, but this is a consistent struggle really with all Masters of the Universe action figures.
Here is He-Man “armed to the teeth.” The only accessories not here are the extra fists. I would like to note that the fireball effects fit on either kinds of hands, but fit best on the punching fist hands. When armed this way, if He-Man punches with his left, the shield becomes a “buster shield” as seen in Gundam.
Notice that the shield pegs in to the bracers, not the arms.
If you want more of a vintage look, then the bracers remove easily. (This photo was an attempt at the “Iron Man” pose…).
THOUGHTS ON THE PAINT
Now for my first real complaint. you can’t have that vintage look with this figure. For you see, the colors are very muted. I remember the original figure having candy-apple red armor and vac-metal parts. For instance the center of the armor and the shield. These should be vac-metal. I don’t understand what it takes to do vac-metal on a toy. But this was a place they shouldn’t have skimped on it.
I have other complaints about the paint. His skin tone is “orange.” Because I teach middle school chorus, to largely female students, I know this “spray-tan” look well. Not flattering for the most powerful man in the universe.
I have heard people rave about this head sculpt. It is supposedly the same head that Faker came with. (I ordered Faker but he got lost in the mail 😦 ). But as in any sculpt only as good as the paint job. His eyes appear to have eyeliner. This time he has blue eyes also, and his eyebrows aren’t as engaged.
PICTURED: MASTERVERSE 40th Anniversary He-Man and MASTERVERSE New Eternia Thunder Punch He-Man.
Don’t know if the skin tone is coming through in this photo, but trust me. It is there. My complaint about 40th Anniversary He-Man’s head sculpt is that he looks indecisive and lacking in confidence. But I have to prefer it to Thunder Punch’s softer features. On the upside, these are brown boots with white fur on top, and a brown loin cloth. 40th Anniversary boots can only really go for another He-Man or barbarian super hero, while you could use Thunder Punch’s body almost anywhere a fury loincloth can work.
PICTURED: Clawful and Thunder Punch He-Man. Both are MASTERVERSE New Eternia figures. You can really tell the difference in the reds…He-Man has a more muted, less striking red. Not quite pink but approaching. Also notice that the SpartanNerd painted that boring shield that came with Clawful.PICTURED: MASTERVERSE New Eternia Thuunder Punch He-Man and Masters of the Universe Classics Battle Cat.
In the above two pictures, you can see where the red on New Eternia Thunder Punch He-Man doesn’t stack up to other reds where he should drop right in with. Clawful has beautiful dark-red paint as well as glossy details. He-Man from the same line has minimal paint. Things are “molded” in their color, without hardly even a wash. And the choice to tone down his coloring is baffling and disappointing. As for MOTUC Battle Cat, we all know that is a whole different level of sculpting and paint (and money!) But, this is what the true A-Lister of Thunder Punch He-Man deserves. Somehow on the deco it seems they cut the corners.
SPARTANNERD’S RATING OF MASTERVERSE NEW ETERNIA THUNDER PUNCH HE-MAN
It seems I wrote alot of complaints about the paint. But this is a really good figure! Very posable, even if none of the MASTERVERSE figures so far can really do the “Iron Man” pose. I don’t have a picture yet, but Thunder Punch He-Man sits on Battle Cat beautifully. His loin cloth is softer, and allows for better sitting poses…a plus if the upcoming Skeletor with throne does the same. He also came with terrific accessories and good play value.
I mentioned this before, but as an adult I am not spending much time playing so much as displaying any of my toys. And this is where sculpting and paint takes a higher priority in my ratings system. A kid or other person who plays heavily with the toys will get very much out of Thunder Punch He-Man. But for me, it is the nostalgia, and that paint misses it for me.
My other complaint about the ab crunch doesn’t get dinged in the ratings. The hot water really did cure it, and because I pre-ordered my figure, perhaps mine has “early production” issues. If I was a Mint-On-Card collector this would have been sent back, the way he was contorted in the box. But I’m not, and this might not be an across-the-board problem…maybe even only my figure.
The SpartanNerd’s rating of MASTERVERSE New Eternia Thunder Punch He-Man is 4/5. Do you agree or disagree, Hub-City Geeks? Let me know in the comments!
Why do I like Conan the Barbarian so much? Basically he is the “anti-SpartanNerd.” Whatever I would do, Conan would do the opposite. For instance, if he gets mad…chop! Accompanied with “splish!” and then “Thud, thud, thump” head rolling down the steps. If I get mad, I might look at you funny…
I have anticipated this product for a LONG TIME. So long, in fact that I am not pre-ordering these Ultimates anymore. Yes…they cost more on the shelf. But I haven’t seen many rare ones. I have seen some Conan the Barbarian Ultimates! on the shelf at different stores, ranging in price from $55 (asking price) to $100 (Collectors market price). And for massive fans of the 1982 movie, this is great. I am a more casual fan of barbarians in general. But at this point I have seen the movie three times over the past 18 months, counting just last night so I could catch up for accuracy as I blog. I give the movie a solid B-Minus, that is if The Empire Strikes Back gets an A+ for reference. (Mattel wasn’t exaggerating when they passed on making Conan the Barbarian toys on account of a movie with gratuitous sex and violence…but the movie DOES capture what the comics and literature are about far better than its sequel, Conan the Destroyer). But I have a MASSIVE collection of Conan the Barbarian comics. I especially enjoyed the Dark Horse books. What they are doing now is OK, and they are going to drop a “Howardverse” on us all in the fall time. I don’t know if I will be all into that, but it might be cool! (Robert E. Howard, for anyone who doesn’t know. He is perhaps the inventor of “sword and sorcery” literature, and Conan’s creator).
Click the link here for a review of the packaging.
Let me go ahead and say some things for the haters:
I have been doing the SpartanNerd blog for years now. I have rarely done a video! Camera shy. I cringe as I hem and haw. But I am honest.
The lighting in the room isn’t great, and my glasses weren’t helping me read off of the package. I assure you…I CAN READ. My synopsis of the movie was purposely not detailed. I wasn’t even trying to do a movie synopsis!
A couple of errors. After watching the movie last night another time, I realize the villain was Thulsa Doom, not Thoth-Amon. This is really unforgivable. Sorry! I guess my nerves got the best of me. And then the other is that it wasn’t the Sword of Aquilonia that was broken in half…it was his father’s sword that we saw forged at the beginning of the movie.
REVIEW OF THE KING CONAN.
He is just SO EPIC!
Now this is just me geeking out. Some reference…my worst action figure is Marvel Legends Thor (classic comics appearance). I say this is the worst because he is not very posable. He has kneepads that break off and have to be glued. He doesn’t stand well with the heavy plastic cape. He came with Mjonir, that doesn’t fit in his hand well. That hand is a weapon holding hand where the thumb is attached to the fingers (creating a circle,) so that the weapon has to be slid in from the top. More like “forced” in. He came with a plastic rock to stand on, and I have gotten more use out of that rock than Thor!
Why this commercial about a different toy? King Conan soundly defeats that and is in the same collectors category, that’s why. We have multiple, swappable hands to be sure he can hold his weapons. (Just that sentence has TWO strictly better cards.). He has an alternate head. (It’s not THAT different). He is super articulated, and stands very sturdy. The sculpt is brilliant, and some of this toy WAS sculpted by the Four Horsemen…there are reused parts from Masters of the Universe Classics Vikor. (Vikor has so far been my favorite action figure, along with Battleground Teela. I kept them after selling off most of my MOTUC collection).
Pictured: Masters of the Universe Classics Vikor and Super7 Ultimates! King Conan. Both are flexing for the camera. Vikor has been my favorite action figure. Pretty much hands down. And if you read the SpartanNerd Blog enough, you know I have lots of pictures of him.
It is apparent when you look at that ab-crunch joint. And I haven’t tried to take off the belt (probably shouldn’t) but you can also see the belly button. Super7 solved one problem with that wrestler-style belt in that twisting his waist doesn’t give us that awkward “table shelf” apparent on the MOTUC figure. You can see from this shirtless flex that Vikor has unsightly pins in his elbow and knee joints. You can’t see a single joint on King Conan except for the torso. All of the cuts in the arms are very well concealed by the sculpt, and the knees and ankles have armor pieces that cover the joints.
Pictured: Masters of the Universe Classics Vikor and Super7 Ultimates! King Conan, with head swaps. It works very well…another clue that this is part re-use. Also, the figure on the left is holding the flail from Four Horsemen Studios Demistros.
Let’s talk about the “portrait.” He does look like Arnold Schwarzenegger, and this is what is important, isn’t it! I was tempted on the last time I went to Wal-Mart to pick up a NECA Terminator 2 action figure of The Govenator…just to compare. (I’m also a fan of that movie, of course. Almost anything Arnold. Even Mr. Freeze). No need for all of that. My only issue is that one of the head sculpts doesn’t have pupils. This is kind of un-nerving to me. There is alot of “fog” in the cinematography, and they didn’t record in high-definition either, but you can still see the pupils anyway. If anything, his eyes are darker. Just white spheres doesn’t do it for me. Now my child can probably remedy this with painting skills…I know I can’t do it!
The accessories that came with King Conan are the Sword of Aquilonia and another short sword pictured above. (It is good that it comes with a scabbard). I am uncertain where the design of this sword came from. Is it something extra that Super7 came up with, or is it a part of the costume that we can’t really see in the image from the movie? (Like…is it from production notes or something?) Someone out there knows this answer!
The Sword of Aquilonia…it does have a drab paint-job. But after watching the movie last night, I realize that this is accurate to what came with the toy. King Conan isn’t specifically pictured with it in the movie, so this can actually be considered an extra piece. Unfortunately, I have to report that the brown paint on the handle has flaked off. It’s no wonder, Conan’s gripping hands are so tight you can’t arm him with weapons without using a hair dryer.
Pictured: I call this one The Coup D’etat-Back to the Wheel of Pain. Super7 Ultimates! King Conan is being led away a prisoner by Masters of the Universe Classics Vikor and MASTERVERSE 40th Anniversary He-Man. Notice the handle on the Sword of Aquilonia (Vikor has it.)
The other accessories are things that go with the clothes…this is a chest harness with built-in paldrons, a mink stole sculpted from plastic, and a soft-goods cape.
You can see in the above picture that the armor and cape work pretty good even for a figure that is an inch taller.
Pictured: I call this one Revenge- After the Wheel of Pain. This is MASTERVERSE He-Man’s body armed with Super7 Ultimates! King Conan’s cape and armor, and King Conan’s head swapped in. He is holding the golden axe from The Animal Warriors of the Kingdom Gold Loot Box, and Mythic Legions Xylernian Guard’s shield. Also standing on King Conan’s rug. And this is about the most awesome-non photoshop picture of a barbarian action figure you can get at this price point.
THE THRONE OF AQUILONIA
Somewhere up above in this same review blog entry I mentioned Marvel Select’s Thor coming with a plastic rock for him to stand on. King Conan’s throne is just another way that Super7’s offering is so much more. But to be fair, you had to pay for it separate. I personally think they should have made this all one box. You don’t get one without the other kind of thing. I don’t own it, but maybe I will…The Figura Obscura Headless Horseman comes with a horse. This is inseparable from the character. It should have been the same here. Who is displaying a King Conan without the throne? Now early on when I was deciding whether or not to purchase King Conan, I watched video commentary about the reveals, and people were torn on if this was worth $45 or not. They have released a couple of other thrones, and they are all a similar price. (Mon-Star from SilverHawks is one I can think of). I am happy with King Conan’s throne, but it could have been a smidge cheaper on shipping, etc if it was bundled together. Or maybe they didn’t think they could sell it at a higher price. I don’t know…I just collect.
As I mentioned in the video, I felt a little burned about the rug not being removable. (Actually I kind of down-played my feelings as “an observation”). Somehow, for 18 months, I thought this would be a cloth rug. Is this communication on their part or me just being a dum-dum? It is well painted. Beautifully painted actually. But we have soft goods for the cape. Something different could have been done here.
So with the throne, you get a plastic base sculpted to be concrete, with a rug sculpted on and painted, the throne itself which is more like a bench and less like a chair, and this ornamental spear. I mentioned in the video that I was glad it wasn’t a scepter. King Conan is an unhappy king in the comics. Sitting around ruling everyone is boring for the guy. He would rather be out there busting snake cult people. That it is a spear was a way that the movie writers could express this to us without giving us a story. It is said that Netflix is wanting to make some media for King Conan, and Arnold Schwarzenegger is very much behind the project.
Pictured: Super7 Ultimates! King Conan Throne of Aquilonia, which is occupied by MASTERVERSE Revelation King Grayskull.
The above photo tackles one of the questions I had. Does it look good with other characters. I find that King Grayskull doesn’t sit so well, which has me concerned because I have ordered MASTERVERSE Skeletor with throne.
Pictured: Super7 Ultimates! King Conan Throne of Aquilonia, which is occupied by GI Joe Classified Cobra Commander.
The throne works very well for Cobra Commander.
One thing…the box that King Conan came with has a terrific diorama featuring a nice shadow behind the throne and two torch-sconces. This is just too terrific. It adds a whole lot to the whole set. The floor I used for these photos is from MASTERVERSE packaging.
A very out-of-character photo. But you can see the other hands well.
Pictured: Super7 Ultimates King Conan and Throne of Aquilonia, who is defending his throne from Four Horsemen Studios Demistros. Demistros is armed with McFarlane’s Redeemer sword. The concrete slab almost disappears in this lighting and filter.
After watching the movie last night, I notice a large disparity in the throne we are given and what was in the film. The concrete slab was three times as large! We only have a straight-ahead shot, but it is clear that the rug is sitting on concrete that is symmetrical on both sides. Super7 could have given us this…it would have been two more pieces of plastic, and then no one would have anything to say about the price point of the throne. Now that this is the SpartanNerd’s summer vacation, I have time to customize this.
SPARTANNERD’S RATING OF SUPER7 ULTIMATES! KING CONAN AND THE THRONE OF AQUILONIA
I’ve had this for about two-weeks now, and have had a couple of photo sessions with it. It delivers for the price you paid for it if you collect action figures or if you are a fan of the movie. Movie fans might be casual like me or serious. Probably a serious movie fan would go for something by Hot Toys or Sideshow or someone, where you pay more like $200. But as what is basically a Masters of the Universe Classics 5.0 figure…(Original wave 1.0, Subscription 2.0, Filmation 3.0, Ultimates! releases 4.0, and now non-MOTU is 5.0 by my counting)…$55 for the king and $45 for the throne isn’t too bad considering the current economy. Considering that this was done at what is on Mythic Legions, non-retail price scale. This is my interest. I am certainly glad I ordered the Battle of the Mounds figures that will be coming maybe in July. It checks all the boxes with little complaint. I am going to list things down below and offer two ratings…one for the king and the other for the throne.
King Conan PROS- Outstanding sculpt. Looks like Arnold Schwarzenegger. Comes with two weapons and removable armor. Excellent paint details. Plenty of hands to swap and also an alternate head with different hair.
King Conan CONS- Pupils on one of the head sculpts not there. Gripping hands are so tight they have to be heated up to work. Paint on Sword of Aquilonia is flaking off with very minimal use.
Throne of Aquilonia PROS- Great sculpt. Terrific Vac Metal paint job. Spear accessory makes all of the other accessories with the figure look sad. The platform has pegs for helping stand action figures that have holes in their feet.
Throne of Aquilonia CONS- The “concrete” slab isn’t the correct size to depict the movie scene accurately. The “rug” is a sculpted and painted detail…not a separate piece.
All of the excellent things I list add lots to the product, and has been more fun for me with time. The pupils issue and the paint flaking are both QC issues that Super7 should address, but they don’t take away from the toys much. I haven’t been displaying the head that doesn’t have pupils…I almost forget that I have it, and the two sculpts are so similar. Look at all that the Throne of Aquilonia has added to King Grayskull, Cobra Commander, and really almost anyone else who might fancy themselves to sit on a throne. Look at how useful that platform is…it has pegs that fit Mythic Legions feet, MASTERVERSE feet, and Ultimates! feet. AND a bonus…the diorama that came as part of King Conan’s package looks too great with all of these fantasy figures to throw away. I can only give a 5/5 when I take everything into account. Maybe not a perfect 5/5, but fairly close.
Pictured: Super7 Ultimates! King Conan and Ultimates! GI Joe Cobra B.A.T. The platform has pegs that made the balance required for this action possible.
Like I said…if you are a different kind of collector, you might disagree. Out there is a larger scale figure, perhaps in 1:6 scale, that you can dress in all manner of looks. Out there is a hyper-detailed statue to sit on a shelf. A large full-scale statue for your yard. That’s not what this product is meant for. It’s meant for the plastic adult collector semi-play with action figure market. The 1:12 MOTUC scale collector. And it does that terrifically.
Will he supplant Vikor? It seems like maybe Battle of the Mounds Conan might be able to when he arrives. Having this makes me wish I had the “iconic pose” version. Watching the movie last night also makes me want the camouflage version. I feel like this figure adds much to all of the barbarian things I have already. We’ll have to see if over time King Conan moves into that favorite slot!
Do you agree or disagree, Hub City Geeks. Let me know in the comments!
Also, Super7. I did what you said. I made a video. I posted to Instagram. Both things I never do. I also answered your summons to apply for the affiliate links program…and WAS DENIED. I am not Pixel Dan or Action Figure BBQ or Dorklair. Don’t claim to be. (I am very inspired by all three, and also by Poe Ghostal …great news I just found out he’s back!)
I am a real consumer who runs this blog as a hobby. It is Summer vacation. I will work on it. But Super7, you guys should reconsider! I give honest opinions and reviews. Readers, send me some advice in the comments!
I am going to wait until the next post to talk about King Conan…in the meantime, let’s talk about what I pulled from the Four Horsemen “Mysteries of Mythos” blind box!
As you can see, I got two figures. The deal with these was purchase the Myteries of Mythos box, and you received a newer figure and an older “out of production” figure that they had in stock at the storehorsemen. The cost was $70 per box, and there was $10 shipping on all orders (flat rate shipping). This still seemed agreeable to me, and I made my order on the final day. Wouldn’t it be great to get “Eagalus?” Here was my chance! I wasn’t allergic to any of the potential older figures, and the hope of picking up that American Eagle Mythic Legion made this worth it. Furthermore, if I purchased either one at a store, I would pay more than $40. I figure this was a new type of “clearance” sale for Four Horsemen Studios.
You can see above that I got “Sir Godfrey” and “Xylernian Guard” Legion Builder. Eagalus was definitely too much of a long shot!
I thought I might do a little comparison…a showdown if you will, sort of like I did with Black Falcon and Demistros. Which figure will win?
OPENING THE XYLERNIAN GUARD LEGION BUILDER
Nothing special here, but I haven’t seen this cardback. It features a Shiva-type of figure. Here is the front and the side with description
I know there is a description, and I read it, but I don’t care one bit. Where can I find this story to read? Maybe I would care more? I am aware of a big “moose” steed that is out of production…I can assume this guy is on his team.
But for me, I see a toy soldier. We have a green “elf” look, and a caucasian look.
Here is everything in the box. Notice that the face shield on the different heads has a different design. One has a cross, while the other is plain. (You are going to see alot of pictures with the parts of “The Throne of Aquilonia.” This is the platform he is standing on and the torches in the background.
So what do we get? Two heads as mentioned above with interchangable facemasks, but non-removable helmets. Two pauldrons, a nice ornamented sword. A huge shield. A belt. A bow. A quiver. And an arrow. This shield features a three-part design. The handle comes off, and the deer figure can separate from the standard piece of the shield. However, I don’t have anything else that can replace the deer, so this is a useless idea for me until my collection gets bigger I guess.
Here is a more “archer” look, fitting for the green elf face.
The sculpt is incredible as always…this is the work of the Four Horsemen after all! There is a soft goods front skirt piece, which is backed by a plastic one. It makes it look busier, but I wonder why they did this? It looks good though. Once again, just like with the skeleton legion builder that I have which came with this same bow and arrow, it is not easy to get a good bow and arrow pose. The skeleton’s arrows were only one color…Xylernian Guard has green on the feathers and the quiver is painted brown. The arrow shafts are silver. So more went into the deco, but there needs to be a way to “knock” the arrow.
Pictured: Super7 Ultimates Black Falcon and Mythic Legions Xylernian Guard figures. Black Falcon is armed with Animal Warriors of the Kingdom gold weapons pack axe. This is a more “heavy duty” build of the legions builder figure.
In the above assassination attempt, you can see that the Super7 Black Falcon looks much more “cartoony” than the Mythic Legions figure.
Pictured: Mythic Legions Xylernian Guard legions builder with un-helmeted MASTERVERSE New Eternia Man-At-Arms head. Note that this head is just sitting there…it doesn’t peg in.
So besides these guys, Demistros, the two ML skeletons I have, and the Tower Ogre, I don’t have many alternate heads. But I found that the unhelmeted Duncan head works very well with this green color scheme.
OPENING SIR GODFREY
Crickets…(I lost the photos of the box!) Trust me. This box was exactly the same as the Skeleton Legions Builder. But it DID have a bio for Sir Godfrey. I suppose it is a shame, as this IS a named character and not really a legion builder. Or is he?
Here is everything you get in the box. Two pauldrons. A sharp mace. A sword. a large shield. A belt. and some pieces that I eventually figured out were back adapters so you can add wings. Also notable, the plume is removable from the helmet.
So Sir Godfrey is obviously a Knight Templar, and I have seen this figure on a peg at Toy Federation in Greer, South Carolina. But I never bought it, being more interested in skeletons. I have also seen a black version with white accents, but don’t know if that is the same character name or a rival or something. Notable, the head of the mace is removable for parts swapping if you have them, and also the front skirt piece is removable if you want to sit him on a ride.
The most striking thing about Sir Godfrey is this silver paint job. WOW! No photo I make could do this justice. It is almost Chrome!
Pictured: Mythic Legions Sir Godfrew and Masters of the Universe Classics Battleground Teela with MASTERVERSE Revelation Teela alternate head. Teela is armed with Sir Godfrey’s sword and her own sword for comparison.
So basically Teela has a new sword! I prefer this to the one she came with. The gold on the hilt matches her armor very well as opposed to that drab brown on her personal sword. Also Godfrey’s sword is thinner, and I appreciate that for such a character as Teela.
Pictured: Mythic Legions Xylernian Guard, Mythic Legions Sir Godfrey, and MASTERVERSE 40th Anniversary He-Man.
I find there to be beautiful congruence in this photo. The crosses on the shields and armor. The swords. That they all stand with the same pose.
Yes, they would probably be on the same team. Maybe they are training here?
ACTION FIGURE SHOWDOWN. WHO WILL WIN?
While Sir Godfrey has striking paint, he is basically a walking suit of armor. He swings down hard on the guard’s parrying sword.
Xylernian Guard has so many options for display. He is basically four characters in one! (Caucasion archer, Caucasian heavy armor, Green Face archer, Green Face heavy armor). So yeah. He knocks down Sir Godfrey and then uses that sword for what it’s for! Hope it is sharp enough to get through that armor, though.
SPARTANNERD’S RATINGS
The SpartanWife said “Well if you get characters you don’t like in this mystery box, you could just sell them.” And she was correct. I could sell these and at least recoup my losses. What losses? I don’t want to! They are terrific additions to my collection. Sir Godfrey’s head makes a great helmet for anyone to hold. All the display options of really both characters.
Scultping is equally good. Paint is wonderfully done. Xylernian Guard is more colorful, but Sir Godfrey is a heavy armored Knight Templar, and should look like this charicature of medieval knights armor. I don’t have any wings for the figures, but those back adapters will come in handy one day no doubt, and can be used on any of my Mythic Legions. They are both nicely articulated.
The only weakness in Xylernian Guard is the difficulty of posing the figure with the bow. The weakness of Sir Godfrey is that he only came with one head, and you don’t know what his face looks like. (I just saw on the internet that versions of him do have an alternate head where you can see his face). Xylernian Guard gets 5/5 AND Sir Godfrey gets 5/5. But the winner of this competition is Xylernian Guard.
Do you agree or disagree, Hub City Geeks? Let me know in the comments!
Pictured: MASTERVERSE Revelation Orko, armed with Animal Warriors of the Kingdom magic staff, displaying Heroic and Evil Magic blast effects.
Maybe you didn’t know, but in addition to being a SpartanNerd and Reverend, he is also a chorus teacher…Yep. With a MMED in Music Education with an emphasis on sight reading music.
Now that I got that qualification (perhaps dis-qualification) out of the way, here is something they teach you at Music Teacher school. You shouldn’t tell the kids that Major sounds happy and Minor sounds sad. They can be either one. A great many country songs with sad subjects are in a Major key, and plenty of party-down rock and pop songs are in a Minor key. So…where is this going in regards to reviewing toys?
Did you catch what I might be talking about from looking at the above four images? The Four Horsemen are presenting the primarily blue and green magic effects as good, and the red and purple as evil. I have learned that the image on the back of the heroic effects depicts Aracagorr, who is a good-guy boss, and the one on the back of the evil effects depicts Poxxus, a bad-guy boss. Why are they pigeon-holing these effects? Outside of Star Wars, this kind of color-coding doesn’t happen much. I mean, it does. It seems like GI Joe might have green-blue blasts and Cobra has red-pink blasts. But some things turn this thinking on its head. The Joker looks cheery and happy, and someone who never saw him before might not think he was evil, but Batman might be construed as evil with the black cape and dark armor. Magic the Gathering flips this script also, Liliana is part of The Gatewatch and is a black-aligned character…White-aligned Heliod showed himself to be a Villain. Final Fantasy X and X-2 also have black mages on the good side. Elden Ring…is anyone good and evil?
How about this? Elemental magic. Lightning is orange or yellow. Ice is clear or white or blue. Life magic tends to show green. Fire orange, red, black. My point is that magic effects is one of the areas of the toy collecting and photography hobby where the fans can be more creative. Right off the bat I disagree with the philosophy the Four Horsemen are giving us for magic and blast effects. And I intend to prove that in the review below.
What do we get in the boxes?
Both are identical, but with different color schemes. You can see them in the packaging clearly, but here is one unpacked.
I’ll go from left to right. A long stringy swirl. 2 large discs, 2 medium discs, and 2 small discs. 2 swirling mists. (I believe the one on the left to be warped…even better then). A long lightning effect and a short lightning effect. A long magic snake effect. And a short skull effect.
Photos of the Mythic Legions Magic Effects in action
I am not going to show that many Mythic Legions toys in this review. So brace yourself. I don’t actually have that many, but I have wanted magic and blast effects for a long time for my action figures. These are the perfect size of six-inch scale. So prepare to see Masters of the Universe Classics, MASTERVERSE, Marvel Legends, and maybe some other things, as well as Mythic Legions.
Pictured: Marvel Legends comic book Thanos with Infinity Gauntlet hand. Mythic Legions Evil and Heroic magic effects skulls.
The little skulls are my favorite. The different colors highlight that Thanos is holding two different souls. Not necessarily good and evil. Because I am talking about mixing it up, why couldn’t one be Green Lantern and the other The Flash!
Pictured: Marvel Legends comic book Thor with Mythic Legions Heroic and Evil lightning effects. What we really need is that lightning in yellow, orange, or white.
Marvel Legends comic book Thor is my worst action figure. The lightning effects really add something to a character like this!
Pictured: MASTERVERSE Revelation Evil Lyn and Teela, both with their hair-down head scupts, and MASTERVERSE Revelation Sorceress. Teela is also armed with the MOTUC Great Unrest Staff of Ka. Also pictured are a variety of Mythic Legions Heroic and Evil Magic effects, and the two halves of the Power Sword from MASTERVERSE Revelation King Greyskull.
That “Pictured” caption took forever to type. Anyway, here I depict a scene where the Sorceress tells Teela and Evil Lyn about the two halves of the Power Sword. The magic effects add a lot to the scene.
Pictured: MASTERVERSE Revelation King Grayskull with Mythic Legions Heroic and Evil magic effects.
The back of King Grayskull’s box depicts an image that looks something like this. (I suppose I need to post a review of King Grayskull and the Sorceress soon.)
Pictured: Four Horsemen Studios Demistros, Mythic Legions Skeleton Legion Builder, who is armed with MASTERVERSE New Eternia “Viking” Skeletor’s scimitar and MASTERVERSE Revelation Teela’s shield.
Here they are with some actual Mythic Legions figures. Demistros is bringing this skeleton warrior back to life. The swirling mist adds something. It is given life by the green soul skull escaping from the red portal. If I had used the red skull, would that story be as clear? Nope.
Pictured: MASTERVERSE Comic-Con exclusive Scareglow with diorama box, MASTERVERSE Revelation Teela, armed with The Great Unrest Weapons pack armor and staff of Ka. Cosmic Legions Silver Figure Stand, Mythic Legions green snake effect and green skull effect. An aquarium plant hides the stand.
I didn’t realize that the snake effect was actually a snake until I took this picture. While I am at it, notice that I have Scareglow mounted on the Cosmic Legions Action Figure Stand. So I am going to take a break for a quick review of that as a bonus under the ratings section below.
Pictured: MASTERVERSE Revelation Evil Lyn and Teela. Evil Lyn has Mythic Legions swirling mist effect. Teela has the red snake effect.
It seems to me that the red snake effect is perfect for the Staff of Ka. Which brings up another point. The Four Horsemen sculpted the Masters of the Universe Classics, and there were a bunch of snake staves sculpted for that line especially for the Snake Men faction. Dare I assert that this magic effect calls back to that?
SpartanNerd Rating of Mythic Legions Heroic Magic Effects and Mythic Legions Evil Magic Effects
Before this review, I actually already used some of the effects in my pictures in reviews on this site. This is a new and very useful item. It adds so much to really so many toys. I only scratched the surface! We need more things like this. The Mythic Legions Magic Effects plays nice in any sandbox. You could definitely use that lightning in Star Wars. You could put those smoke effects behind a Hot Wheels car or something. Disney Barbie dolls. Maleficent. Pokémon. Zelda action figures. I don’t own any of these, but oh the potential! Multiple scales, too. And apply them to the vintage toys like you always wanted.
My hangup is the assertion that the red effects are evil and the blue effects are good. That’s like saying you could only use Metallic crayons for transformers. You can only put ketchup on french fries. You can only add rubber ducks to Jeeps, not Ford trucks (I saw one today with ducks on the dash). I am surprised that this assertion came from such a well-rounded studio.
The sculpts are nice. The product does seem a little bit brittle. I am careful, but some kid out there probably wouldn’t be. But these were made for adult collectors, so…
I bought both sets and am scoring them the same. 5/5. They add very much to all of my collection, and I know they will to yours too!
BONUS:Cosmic Legions Silver Figure Stand.
After such a glowing review…time for a not-so-glowing one, lest you assert I am some kind of loyalist…(Everyone who reads this stuff knows I am honest to a fault perhaps.).
The stand stinks!
The stand came in this polybag with a yellow sticker- (see the photo near the top of the page.)
When you assemble it, well…it seems like the vertical end of the stand should be flush with the platform, doesn’t it. And in fact I have seen pictures of other peoples stand where it is. But mine would not click in. And I used a good screwdriver and a good wife to try and tighten it up. No matter what pressure I put, no matter how tight I made the screws, this “daylight” wouldn’t go away. I was afraid I was going to break it if I kept trying to force it.
If only that was the only problem.
When I was posing my figures outdoors reviewing the Animal Warriors of the Kingdom Red Weapons Loot box, I made a picture of Man-At-Arms using the bow and arrow. (See the review with the picture here.)
I put Duncan in the stand, but realized a problem.
The business end of the stand has this metal claw. Now there were these little rubber bits that covered the metal “points” of this claw. As I was posing the figure, they came off! Luckily no damage was done, and miraculously I kept them from being lost in the grass. But they didn’t make it this review, did they? Now if I use the stand, I have to consider that it might scratch the paint or damage the figure. (You can see these rubber pieces in the Scareglow picture).
My advice, SKIP THIS ONE!
Rating of the Cosmic Legions Silver Figure Stand: 1/5. This thing is awful. I know it is for the science fiction version of Mythic Legions, and I don’t even mind the silver metallic stand. That is fine for whatever. But the assembly went wrong. The rubber things came off and have since been lost while using the stand for its intended function. I worry about damaging figures if I use it. There are better stands out there for your money.
One might argue that it is because I used MASTERVERSE figures instead of Four Horsemen figures. To that I assure you that there isn’t enough difference in the thickness of their waists. I also assert that a figure stand should be versatile. Any action figure within reason should work. Thanos wouldn’t be within reason, so I didn’t try that one. Man-At-Arms should have been fine.
I ordered the Animal Warriors Of The Kingdom gold weapons loot pack from BigBadToyStore, as I was looking for weapons packs and weapons, weapon racks, and other related items for 6-7 inch scale figures. I was specifically looking for things that were cheap, but probably would work with my growing collection of MASTERVERSE. This weapons pack caught my attention because I thought it might go well with the Super7 Ultimates! Conan the Barbarian: Battle of the Mounds figures and King Conanwith the throne of Aquilonia that should be arriving within a couple of months
Animal Warriors Of The Kingdom (AWOK) is a line of action figures by a company, Spero, that I am not very familiar with. There are named characters apparently, but I am unaware of the story at all. In my mind, it’s a little bit like the Mythic Legions, where the figures could be any generic fantasy Idea. Most of these figures look like they fit well with the ThunderCats. There are several different colorways of these weapons, as well as variations of what weapons you can have in a “weapons loot”. It was the gold weapons that stuck out the most to me. Below are pictures of the package.
These weapons came in a wonderful window box…it was really very nice. Maybe I should have videoed this box because it is hard to do justice to the effect of holding it and looking at it. When my wife saw the package, she said “That is a terrific shadowbox.” It’s true. There is an orange Sunburst in the background and the weapons are suspended in a blister that allows light in and shadows to fall behind. It’s a boring window box otherwise, but the main idea here the weapons inside are very apparent. These weapons are just attached in a blister. There is no kind of weapons rack or other storage solution, which is just too bad. (Almost my only complaint!). The character on the back is apparently named “Pale,” (Question? ”pronouced “Pail” or “Peh-Leh?”). which is information readily available if you look at the other offerings from the line. He is some type of simian.
The weapons included are: a large mace similar to some weapons in Elden Ring, a broadsword with a jewel in the hilt (very original), two guns (one a shotgun and the other a muzzle-loader type of pistol…both in the safari hunter style). What first appeared to be two pieces- a scepter/magic staff and a short sword, are actually meant to combine to be a long spear. I suppose you could technically keep them separate. And my favorite…a battle axe.
The SpartanNerd has been working on his photography game little bit. You can see that I have a new light box set up. I’m also working on diorama pieces and so here are weapons racks that I made homemade. I found many of tips on the internet about making weapons racks for G.I. Joe classified guns, and also there are racks available to buy. Mostly these are for guns that come with G.I. Joe classified or Marvel Legends. In my case I want a more barbarian, Masters of the Universe congruent look, so I just made an A-frame similar to what we got with Castle Grayskull in the 1980s, and also a square one similar to the Masters of the Universe Classics version.
I won’t lie to you. I thought about buying the Classics version again, but there aren’t that many of them out there for sale and what is for sale is well over $50 used. I remember when I had this, I wasn’t that happy with it. It seems to me like I could not get the weapons on there the way I wanted, and sometimes the tight pegs would rub the paint off of the weapons. I resorted to rubber bands on it also. Looking at old pictures of it doesn’t bring back great memories. Why aren’t there more diorama pieces readily available to purchase to help fans like the SpartanNerd and the Hub City Geeks out?
I decided to break out the She-Ra from the San Diego comic con exclusive 200x from I don’t know, 2003 or 2004. I keep her in her window box but take her out on special occasions. Her style of sword and the gold motif on her armor match up very well with Movie He-Man and the golden AWOK sword. Now is a good time to point out that none of these weapons will work with 7-inch scale female figures. In the case of this sword and also the guns below, you feel like the fingers are stretching even on larger hands.
I like characters that are like walking weapon racks. Case in point, Two-Bad here can run with the whole mercenary motif. I need to talk about the size of the handles of these weapons. In order for Two-Bad to hold the rifle, I had to face it into his body first in order to wedge the handle into his fingers, and that twist it around. Even this way that handle is so thick it does not want to give me the desirable Sergeant Slaughter type of pose I would want. These weapons were terrific with other toy lines, case in point the redeemer here holding that golden Mace just seems perfect. (The Redeemer can’t hold the guns. His fingers are too stiff. Too bad, because he only has trigger fingers.)
Vikor fending off a Mythic Legions skeleton army builder. A good test case for a future Conan model. From this picture, don’t you think that the handle looks too big? Because Ultimates Conan figures are basically Masters of the Universe Classics figures, I wonder if there will be drama. This sword looks great otherwise in Vikor’s hand.
I’ve had terrific fun posing and taking pictures of my figures with the Animal Warriors of the Kingdom gold weapons loot set. The weapons look great in the hands of male MASTERVERSE, MOTUC, Mythic Legions, and even Spawn figures. The shadowbox packaging is a neat trick. Be careful with the hands as the handles on some of the weapons are a little thick. I am curious about how well they fit in the hands of the AWOK figures. Spero offers plain army builder figures out there for low prices. Maybe I will get one someday and see. Of more interest to me is the set of armor I saw on Big Bad Toy Store.
I am rating this set 5/5. The weapons look great and that is really the whole point for me. They can add a new dimension to figures like Two-Bad or Barbarian Skeletor. I don’t warrant subtracting a point about the handles…after all I did get the weapons into the hands of the figures and nothing broke and no paint scratched or peeled off. (But it is worrisome.)
Do you agree with my 5/5 score, Hub City Geeks? Let me know in the comments!
Halloween always has been a good day, except for exactly one time out of 43. (SpartanNerd is 44…). That one time is enough to throw a wet blanket on the whole celebration. Without me getting to specific, Hub City Geeks, some years since this personal tragedy, I don’t do anything. One year I bought a new iPad with my mom. One year I paid some taxes and bought some donuts. This year I got my alignment tuned and then drove to the Toy Federation in Greer, South Carolina.
I am feeling a little burned on the Super7 Conan the Barbarian situation. I have five figures on order, and none of them set to ship until the Summer of 2024. Yep. King Conan and the throne were ordered on Christmas 2022, and won’t arrive until June 2024. This is irksome. And the Battle of the Mounds collection which I ordered earlier this year is set to ship at the same time. But I have a barbarian itch that needs to be scratched. So on October 30 I looked into it, and there are new Mythic Legions out there.
If you didn’t know, Mythic Legions is the Four Horsemen toy sculpture studios own line. I’ve never bought any because they are all a little bit generic to me, besides also they are quite pricey, and finally hard to find. For instance, I really want the Bird warriors that they came out with. They rarely appear on the secondary market, and when they do, you are looking at $200. Used. Opened. Played with. Etc. But they are so awesome!
What I found was on the Toy Federation Facebook page that they got in a ton of new Mythic Legion product. New at retail will definitely be an option on sad Halloween. So off I went.
Here is $40 worth of skeleton warrior. A simple package…or is it? What attracted me here was that big axe! And so shiny. Since I was in the market for barbarians, I could envision Conan taking out this guy, or him sneaking up behind him with that axe held up.
Examining the package, you can see a polybag on the inside. Mystery accessories? The box seems to be a card with DND style graphics. The bottom says Mythic Legions. (Just so you know, there are some sub-lines. Seventh Kingdom (animals), Gothitropolis, Cosmic Legions, and Figura Obscura (real-life)) But Mythic Legions is their main property.
Here is the back. This image looks like something from Elden RIng. (I am about to finish my first play through!). And one more thing, see how the plastic window wraps around. YES THIS IS COLLECTOR FRIENDLY PACKAGING!
You just flip out the bottom plastic tabs, and the cardboard back slides right out!
We got this message..
A good warning. I hate breaking my figures.
So what do we get in the polybag? shoulder pauldrons, a strap with a holder loop for the sword. The sword. The dagger, and another hunk of axe. What?
This axe is very modular! Outstanding! It turns out, that the figure is ALSO. I had no idea. Every part of the figure can be swapped with other parts from other figures in the Mythic Legions line. WOW! As for the axe, you can go with executioner style, barbarian style, or just style…the spike at the bottom is even swappable.
Here he is, completely decked out. He stands just fine. I had no problem getting him out of the blister. I decided to toss the blister…the collector friendly box will do just fine without it. The weapon fits nicely in his hands.
This is a big sword.
Time to get Vikor.
Vikor is my favorite subject to photograph. And this is great…the image to shine a little light on my Halloween.
So how does the Mythic Legion stuff work with other property.
First off, the head swap.
Vikor is a Masters of the Universe Classics figure, and his head joint is a little smaller than Mythic Legion skeleton army builder. It just sits loosely. But it does look very cool.
Masterverse Movie He-Man didn’t come with a battle axe. This axe fills that purpose terrifically. It didn’t stretch the hands either.
How hard is it to separate the pieces of the Mythic Legion Skeleton? Well, I had to apply some force. The neck joint is a separate piece, which was why I was first surprised at how each figure is meant to be completely swappable with other. Getting the torso off takes a good bit of pressure. I haven’t felt that I was about to break a piece. And after playing with it for awhile, the joints have become pleasant rather than stiff.
I also got some other figures…Raven Spawn and Anti-Spawn (Redeemer).
As I began to leave Toy Federation, I just glanced around for something else. And in the glass case they had several tall off-card figures, and one caught my eye.
The Anti-Spawn, also known a Redeemer is the subject of Spawn issue 16. I just read this a few days earlier, and that’s why I was drawn to it. $10. BOOM.
(Let’s be clear…Redeemer is the title, like Hellspawn is the title. Anti-Spawn is the name of this Redeemer. Spawn is the name of Al Simmons, the Hellspawn. Not confusing at all!)
I mean this is a used figure. The left wing is a little bit loose. He came with a stand, but he doesn’t really need it. (It is a just a round disc with the word Spawn on it and a foot peg.)
The man behind the counter incorrectly labeled Raven Spawn as Curse. Curse is a cyborg cult leader. Raven Spawn is someone forgettable from the comics. But…I didn’t even know it was a Spawn figure. I just thought it looked awesome! (Also $10!)
All the chains and the scythe. And the spikes. He doesn’t scream “bird” at all. The only color here, green necrogenic eyes.
These two figures are articulated like Marvel Legends figures.
Yep…He ripped the wing off…
These are both highly posable and well detailed. But taller than the other figures I have. The Marvel Legends I have…comic book Thor is terrible. Thanos is great. Deadpool (I can’t find him) is one of the top figures I have ever had. These are just like Deadpool, with less accessories.
Even after that paragraph…look how creepy Raven Spawn is in the shadow. Anti-Spawn looks exactly like he was ripped out of Spawn #16.
I believe These two were sold at Target or GameStop originally. I saw some Spawn figures there before, but felt they were too pricey or I wanted something different.
So what does the SpartanNerd rate all of this?
Mythic Legions Skeleton Army builder. 5/5. I mean the packaging graphically is a little weak, but it more than makes up for that shortfall with the collector friendly features. The figure is great, and I can totally be hooked on Mythic Legions. I am planning on what I will get next from that line!
The two extras I picked up. Anti-Spawn gets 4/5 on account of the weak wing. Raven Spawn is perfect. 5/5.
Do you have these figures, Hub City Geeks? What would you rate this Mythic Legion? Let me know in the comments!
spartannerd 