MASTERVERSE New Eternia Evil-Lyn- SpartanNerd Unboxing and Review

It has taken SO LONG for me to properly review this figure.

But she is pretty terrific! Let’s emphasize “pretty.”

My history with Evil-Lyn coincides with the end of my playing with toys as a child. At around the 11-12 years old mark. (December birthday…probably just turned 12). I received Evil-Lyn and Tyrantisaurus for Christmas, and my uncles had a fit making fun of me at my grandmother’s Christmas party. “You are playing with dolls!” It didn’t matter…I thought she was great. And she went very well with the cyborg dinosaur. (That dinosaur had one of the coolest missiles in all of toys).

The reason it took so long for me to review it … more like reasons…I had a horrible bout with the flu around the time I unboxed the figure. I filmed video of me talking about it, but it sounded so horrible. Not fit to publish. So I did another video about a week later. And THAT one had interference all over it. Background noises, etc. Making YouTube videos is more challenging than I would think.

Eventually, I was at the SCMEA (South Carolina Music Educators Association) conference in Columbia, South Carolina, staying at a hotel, and had sufficient time and a different environment to do some video reviews. So the photos and all that I post here and on YouTube will be a hodge-podge.

PACKAGING

She comes in the superior MASTERVERSE packaging, with superior art. You can see the figure in the window very clearly, as well as her wand. I have a complaint, in that she has drop-down hips, and on the blister they are pulled down, making an awkward look for those MOC collectors. (She doesn’t look as bad as the Green Goddess). The illustration of Evil-Lyn looks menacing and all business. She is in front of Snake Mountain, and there is a Skelcon to her left. (The Skelcon is one of the upcoming SpartanNerd reviews!) MASTERVERSE is in exploding rocks on the top, and Evil-Lyn’s name is on the side slant, which invites you to look at the side art.

We see her standing, cape raised with spellcasting right hand energizing the wand. She stands on alien ground, typical Eternia yellowish brown dirt and plants. Her head appears large above her. If I was a Mint-On-Card collector, I would absolutely display this side on my shelf.

Let’s see the other side.

More Skelcons, and lest we forget, Panthor coming down the stairs on the side of Snake Mountain. Notably, just in the past few days Mattel Creations posted Panthor for order, and I jumped on that so fast. (Panthor review coming hopefully before the end of February!)

Also notable on this side is a glimpse into where this line could go. That moon with a face on it is from the New Adventures line. (Nordor?) I believe the only New adventures MASTERVERSE figure out there is Slush Head. I have seen him on clearance in a couple of places. While I believe Slush Head is cool, and on of my brothers had this vintage figure, New Adventures doesn’t appeal to me very much. This isn’t “my He-Man.”

And here we have my least favorite thing about the recent packaging. This is a photoshopped image of the figure. Pointing out that she appears more “yellow” here, while the figure is Caucasian. (I prefer my Evil-Lyn figures to not be yellow in general). She stands in front of a fungus covered Eternian tree, with a blob of red magic photoshopped on a layer behind the wand, notably assembled in long configuration. Pictures clockwise around show Evil-Lyn raising her hand above the crystal ball, the soft-goods cape, a cross sell of Evil-Lyn (why?), a cross-sell of Fisto (review here), and a cross-sell of Flying-Fist He-Man (I am not getting that.)

BUT, check out this bio. One of the best! So good I am going to re-type it here.

“EVIL-LYN| Evelyn Morgan Powers. Evelyn Morgan sold her soul to the Subternian Warrior Goddess. She was given powers beyond her dark imagination, changing her forever into Evil-Lyn.”

BOOM. This right here is what this New Eternia line is about. Evelyn Morgan Powers being Evil-Lyn’s name has been a thing since the planning stages of Masters of the Universe way back in the early 1980’s. As far as I know it wasn’t mentioned again until Masters of the Universe Classics, when they began giving “real names” to characters. Also, “Forever becoming Evil-Lyn” totally bucks the story of Revelation/Revolution, where Granymyr declares her “good” upon his death.

That she sold her soul to the Subternian Warrior Goddess…Who is that? They probably won’t make this character, so, fill in with your own Mythic Legions!

HERE’S WHAT YOU GET IN THE PACKAGE

Yep. This is it. Basically this red package contained alternate hands and the bottom of the staff.

I am going to go ahead and complain about that. Mattel ABSOLUTELY could have given us more accessories.

This is the third Evil-Lyn from the MASTERVERSE line, and only one of those came with proper accessories. Revelation Evil-Lyn came with an alternate helmet-less head, two wands (one short and one long,) a pocketbook, and alternate hands. I complained about Movie Evil-Lyn not coming with many accessories, and the same here. There is no excuse. She is known to take that helmet off. We should have gotten that. She transforms into a fireball in Filmation all the time (I watched some Filmation while I was sick…comfort food!) Why didn’t we get some kind of fireball. Or even a magic effect. Kind of like they depict photoshopped on the back. NOPE. We get alternate hands. That’s it. And we have tons of alternate hands already that fit. I am not counting the bottom of the pole as an accessory really. More like “the bottom of the weapon.”

You can see that our new Evil-Lyn is more exhibitionist than the Revelation one. She is also about an inch taller, because the thigh cut is new tech. And also the new figure has new more flattering knees. I like the translucent blue staff, but I will say I prefer the more colorful staff that came with the earlier Evil-Lyn.

FIGURE REVIEW

Having gotten that negativity out of the way, the figure is all around beautiful. This is a wonderful sculpt, and she looks like a fashion model. She isn’t “busty” as some depictions, 200x for instance. No, she is elegant…maybe even “dainty.”

PICTURED: MASTERVERSE New Eternia Evil-Lyn with Mythic Legions Magic Effects. The blue effect proves my point about that specific product. (It matches Evil-Lyn’s wand very well).

This sculpt is so good. She shows a lot of leg, and that is appreciated. Unfortunately, you can see the seams on their thighs a little too much, but this was my complaint with Snake Sorceress Teela also. The “loin cloth” hangs down hiding the crotch area, and where the drop-down hips were a problem on card, the way they look adds to the curviness of this figure. A big improvement is the knees. Before, say in Movie Evil-Lyn, the knees looked like “cellulite.” Fat knees that took away. This is what Mattel came up with to maintain more articulation. But these knees looks so much better, and the articulation is just as good. I believe it makes her thigh and calf muscles appear more ripped.

She has sculpted boots with the appearance of a furry top around her calves. So with all this fur on loin cloths, boots, armor, whatever…maybe it stays pretty cold in Eternia? Seems like a contradiction because everyone is also half-naked.

PICTURED: MASTERVERSE NE Evil-Lyn with Mythic Legions Magic effect, and Mythic Legion Ninian Infantry (Review coming soon)

Her torso…she has an ab crunch right below the bodice. We have nice sculpted details in blue and purple color scheme. She also has blue bracers on her biceps and wrists. This top is sculpted on and is non-removable. (Masters of the Universe isn’t that kind of property!) Kidding aside, you COULD remove Battleground Teela’s in the Masters of the Universe Classics line, so it was worth pointing out. (Nothing to see there, people!)

The cape…it is solid black and soft goods. Evil-Lyn can’t hold it to the side like she often did in the Filmation show. (She is rather plain under the cape. Do I have to say it again…Nothing to see there, people!) I wish this cape had a wire to it so that it could be more posable. And why didn’t Mattel give us this? It would have only added to the figure and couldn’t have cost that much. I like the purple nails.

Her face. Who is this?

PICTURED: MASTERVERSE NE Evil-Lyn

No really. Is this some actress? Model? An attractive worker at Mattel studios? I’m just saying, this face sculpt doesn’t look like any Evil-Lyn from before. Which is fine. I mean, it’s just really different but well done. The helmet seems to be a little big for the face. BUT, this brings a point. Perhaps it is a helmet with a headdress on it. Something I never thought about.

SPARTANNERD RATING OF MASTERVERSE NEW ETERNIA EVIL-LYN

She gets a point for this terrific sculpt. Mattel needs to bring this A-Game to every MASTERVERSE figure.

Her paint is great, from her nails to the fur on her boots, to that wonderful vexing face.

Her articulation is usual…I will say I had a little bit of trouble getting her to stand at first, but after some wrangling this hasn’t been a problem…certainly not a stupid problem to deduct a point.

And she adds what to my collection…the best female sculpt I have. Better than Green Goddess, Battleground Teela, other Evil-Lyn figures…any of them! She seems to go right with King Conan and Boreus here.

PICTURED: Mythic Legions Boreus (Horse), Super7 Ultimates! King Conan, and MASTERVERSE NE Evil-Lyn. On an adventure in what tiny bit of snow we have had this Winter. In fact, for several Winters Spartanburg South Carolina has had no snow.

She loses a point because Mattel just didn’t give us more accessories. I think about this problem, and … I don’t know the business, but here is a thought.

She stands an inch taller than earlier Evil-Lyn figures. That’s an inch more of plastic and paint. That would be accessories, because they haven’t raised the price. Maybe I’m wrong. But regardless, Evil-Lyn should have more things. Filmation artifacts, scanners and collars from the movie, magic effects, or a fireball…something. And what about Screech and (and Zoar for that matter?) This would have been a cool addition.

So the SpartanNerd rates MASTERVERSE New Eternia Evil-Lyn a 4/5. Do you agree or disagree, Hub City Geeks? Let me know in the comments! Also be sure to go over to YouTube to like and subscribe to my content. There you will find this review in a different form, as well as other recent reviews of MASTERVERSE, Mythic Legions, and other 6”/7” figures.

Mega Eternia Tower- Attak Trak and Mini Figures. SpartanNerd review

The Eternia Towers. As a child I only dreamed of this set. I knew of it from the toy catalogue in 1987? and also from the mini-comics. (Here is a picture below.). In person I have only seen this toy one time, at the Toy Federation in Greer, SC. And it is truly a marvel. HUGE! Which is why the size of this set is a little bit of a downer.

Now I am NOT building the tower yet. I figure I would wait until I got all three pieces. Surely Grayskull Tower and Viper Tower will come out before Christmas this year. Just up front, this set looks to be smaller than the vintage set was.

Instead I was super excited that we finally got the Attak Trak! I don’t have much of a nostalgia connection to the tower. But the Attak Trak, now we are talking! I might have skipped this set if it weren’t for that specific vehicle.

But first, the packaging. This is one of the best boxes in awhile. (Pictured at the top). It features the Eternia Tower prominently, and shows off the mini figures with an illustrated vibe. You also can see the Attak Trak. Important…it also shows paintings of Grayskull Tower and Viper Tower, as well as Castle Grayskull and Snake Mountain. Eternia Tower is supposed to be a place of balance between good and evil. (I think this is the original lore anyway.). I heard sometime awhile back that the intention was to create a Grayskull 2.0. This set was to feature a piece of Grayskull and Snake Mountain, both of which were out of production but demand was expected to go up with the movie and all in 1987. The Eternia Tower story was to launch off new property, He-Ro and the Masters of Preternia, or something like that.

The sides and the back of the box are terrific, featuring retro blueprint types of designs in red. I can’t express how great I thought this was! And this box is much smaller than Grayskulls or Snake Mountains. Of course, this set is alot less pieces though.

Now for the figures.

We got Battle Armor He-Man. This is the same as the one we got before (I am going to show comparisons on all of the duplicates.). The only difference is this armor has the one scratch on it.

We got Webstor. This is the same Webstor from Snake Mountain, but with a darker color scheme (hard to tell in the photo) and also a larger lazer.

I couldn’t help but do an Erle Norem reference. We get Buzz Off. I prefer Buzz Off without the helmet. It seems I lost it when I was a kid, and kind of forgot about it until I was an adult. But he came with it, and his little axe also. This is the first Buzz Off we have had, and so Clawful and Whiplash couldn’t be too far behind soon… (They use the same chest piece and monster legs.)

And finally, Ninjor. This guy is a walking weapons rack! He comes with a bow and arrow, a katana, and nunchuks. Admittedly, this character wasn’t one I had as a kid. I have expressed that I had about 80% of Masters of the Universe stuff as a child. But Ninjor just wasn’t one of them. I don’t know much about the character either. I remember Jitsu quite well, and am surprised that we haven’t seen him yet to balance out Fisto.

I went ahead and built the weapons rack/computer system.

We have been given so many different weapon racks. But this one is different. the computer on one side…I just am not familiar enough with the Eternia Tower set to know if this was part of the original toy. I like how the graphics on there show the three towers. I almost think of it as a charging station for the Attak Trak. The weapons are in bright orange, and frankly I don’t really like that.

Here is some comparisons with other weapons racks we have from this line.

Here is a comparison with a Skeletor Head computer.

All of this is pretty consistent. On to the Attak Trak!

As a child, this was my FAVORITE vehicle. It ate the C batteries…that was the problem. But I loved it from the cartoon (which was more of a big talking van) and I loved the toy with the awesome treads to run stuff over.

Those blue things on the side were always a puzzle to me. Were they supposed to be guns? I never could tell, and really almost can’t tell now. It has a rocket design on it, so maybe a missle launcher?

They included nice vintage printed blocks to go where the stickers would be, just like they did with the Battle Ram.

On the vintage toy, figures could grab the handle basically with the same design as the battle ram. Here we don’t get that option. It just has some studs that stick off to the side and nothing for the figures to grab. The wheels work exactly like the vintage toy. Which is super fantastic. You have to push it yourself, of course. But it is a genius design.

In Masters of the Universe Classics, we got a few vehicles. Roton, Battle Ram, Wind Raider. But they skipped the Attak Trak. And that was actually truly shameful. I don’t even think we have had any Attak Trak re-dos or analogues since the 1980s. I don’t own a single Masters of the Universe Origins figure. But if they come out with a new Attak Trak, I bet I am the first to get it!

And now you know how this story will play out…

Here is a bug theme setup, Buzz Off vs. Monstroid.

Well, I rate the Attak Trak a solid 5/5. I think it is weak to give us another Battle Armor He-Man and another Webstor. Ninjor is cool, but doesn’t really belong in my head. Buzz off is terrific.

They need to give us more mini figures. You all know what. I really want. It is that Battle for Eternia II set. But no one has it. So….

Mega Construx MOTU Custom War Sled

What got me started on this was this image that I took when I picked up the McFarlane toys Cy-Gor and wanted some pics. I got this one with MOTUC Man-At-Arms on the MOTUC Battle-Ram. And so I was messing with the filters in Apple Photos, and this color scheme came up. And instantly, I thought…this looks like the enemy version of the battle ram! The “War Sled.” (As opposed to “Sky Sled.)

I don’t remember how long ago this was. At some point between taking this photo (August 20, 2020) and selling off my MOTUC toys, I picked up two Battle Ram Mega Construx sets. It became my intention to make one of them “evil” in purple. After all, the set comes with a griffon head and a serpent head. They encouraged us to use our options!

Basically I just bought some purple-flake spray paint. I taped up all of the parts that have stickers and removed the wheels. And sprayed away. I had alot of success with crimson flake on the Gundam Epyon model, and I knew this was the effect I wanted.

I only recently really began to paint things. I felt like it turned out pretty good.

You can compare the original with the purple one. I couldn’t do anything with the round control panel. I thought I might use some warhammer brushes on it or something. But in the end, I decided just to take it off. It looks more evil this way in my opinion. I mean, maybe the evil warriors are driving the old model. Or maybe they want to pollute, and that thing on the good one is some kind of environmental control. Or maybe (more likely) the Battle Ram is a relic of the old world, and Man-At-Arms has improved upon the design, while the bad guys just get the clunker model. I believe that part underneath to be some kind of turbine from an earlier non-motu set.

The War Sled vs. the Jet Sled. I really need to get some flight stands.

What about the “ram” side?

How about this for an impromtu battle scene!

I am encouraged by the customizing scene for Mega Blocks. For instance, you can find all kind of mixed recipes to make characters and sets. What I mean is, people mix and match Mega Blocks, and Mega doesn’t seem to care. Lego, well, it seems like they care alot. In this case, painting a common, readily available set was cool. There is a more green version out there…I should try and make that sometime. Hey maybe I’ll make one with a long seat, like from the He-Man and She-Ra Christmas Special!

(Image from Awesomer Than Thou.)

Mega Construx She-Ra vs. Hordak and Mostroid…SpartanNerd Review

The Monstroid. Here is a toy I DID NOT have as a child. I had around 80% of He-Man and Masters of the Universe items. But the Monstroid wasn’t one of the things I had. I was aware of it from catalogs and the He-Man magazine. And the Monstroids were the giant robots He-Man and She-Ra fight at the Fright Zone in the He-Man and She-Ra Christmas Special. This toy doesn’t resemble them much, however.

So this is my first Monstroid.

Don’t you love the title. Is there another character here?

Here is the back of the box.

I didn’t spend much time looking at the back, as will become evident as I document the build.

Here are the sides of the box. Very nice artwork on these Mega Construx Masters of the Universe sets, I must say.

Enough gawking. Let’s open it up!

You get these four baggies. Because I have been building these, by now I know that the minifigures will be in bag number 1. So let’s get them out of the way first.

This is our very first Hordak in Mega Construx minifigure form. Also, our first Evil Horde member. Here we have the toy-accurate Hordak. I am a little disappointed that we didn’t get the bat staff. But we did get the Horde Crossbow, which is important for all Horde members in the future.

She-Ra. As I assembled this, the first thing I said was… “Those boots are so stinkin’ cute!” And they are indeed! Of course, I didn’t own She-Ra growing up, nor did I care to. As an adult, now I have TWO! (200x in box.). One thing, though. Check out the head sculpt.

It’s all one big thing. With the male characters, you can remove their hair. But She-Ra keeps with the apparent standard that the girls have to have their hair sculpted to the head and non-removable. Why, exactly?

One more thing. The cape. Both Hordak and She-Ra have a cape, and they are interchangeable. But Hordak looks pretty dumb wearing that short cape. The long cape looks good on She-Ra, and will look good on other characters as well. (Sorry, no pics of the cape swap.)

Was there another character? He wasn’t mentioned in the title. OH WELL…

Must

Not

Be…

Just kidding. Here is Prince Adam in his Mini-Eternia blue vest.

Nobody asked for this…and because the set is titled She-Ra vs. Hordak and the Monstroid, it is like he was tossed in last minute. I’m glad to have him, but we already have a Prince Adam in toy accurate/Filmation style. (Pictured, we also have the first extra piece. An extra handle for the shield.)

Here I would have rather had an ally for She-Ra from her girls toy line. Or maybe another Evil Horde member. I would have rather had Prince Adam on card in this style. It just doesn’t make sense what they did here. Do we even have a Prince Adam on card? Notable, he does have the Alcala-style Sword, but in black.

Here is the set of all three.

Let’s look at how the build went, and I will let you know what I was thinking as I worked.

Here is the front of the instruction booklet. It is the same art as the front, with less textual clutter.

Below is the art on the back. It shows off the Battle Cat that I won’t be getting, and the Land Shark that I reviewed already here on SpartanNerd.com.

It’s time to talk about how we name things, boys and girls. Here is the Brick Separator tool. NOPE. WAY TOO NEGATIVE. It has been re-named the BUILDING TOOL. See what they did there? They went from a negative description of what the item is to a positive description featuring something it can’t do. It can’t build. It can only separate. But, there is hope!

Here is the contents of baggie 2. If you have been following my blog, then you know I have to set all the pieces out classified in order. So here that is.

Here is the infamous “impossible” slab of three and then two.

The next picture shows off what has to be the dumbest face in all of MOTU. And that is saying something. These are tampograph stickers…I know it is of the original toy, that I don’t have emotional attachment to. Perhaps people out there disagree with me?

I mean…the Monstroid is a crab, right? Here is baggie #2 completed, along with the included extra parts.

I made another funny joke! (Notice I included Prince Adam as an extra part. When I got MOTUC Orko, Prince Adam was included as an “accessory.” That must be what they are doing here also.”

Here are the contents of Bag #3.

“I’m not seeing it.” The thought that ran through my head.

Remember when I said I didn’t grow up with this toy, and also I didn’t spend time studying the back of the box? Well, as I built this part, I thought, “What is this? It looks like a transmission?”

Turns out I was kind of correct. Here is the rest of Bag #3 assembled with extra parts.

What that part is…it’s a “winder.” When you turn it with your fingers, it makes the yellow axle spin. Except, it didn’t work for me…(More on that as you keep reading.)

On to Bag #4.

As I organized these on the mat, I coudn’t help but kind of be reminded of assembling the Lego Batmobile so many years ago. And then Castle Grayskull. All these parts are the same color, and they kind of intimidate me.

Here is bag #4 assembled, which was the legs. It reminds me of a Dwarf Spider Droid from Star Wars: Attack of the Clones and Star Wars: Revenge of the Sith.

Here is the full set in a mock of the front cover. Also, the extra parts.

One problem, You are supposed to turn the winder, which turns the axle, which is plugged into the bottom of the main body with the arms. When you wind it, the monstroid spins around on top, swinging Prince Adam around. But mine wouldn’t work. I wound up disassembling it again, where I had to finagle with that “transmission” piece and make sure the gears lined up correctly. This didn’t take that long, because it is really a simple build. But I was alarmed.

Now for some shots of the Monstroid with other similar sets.

Point Dread and the Talon Fighter is a couple of hundred pieces larger. Monstroid doesn’t feel as grand either.

Maybe it’s not fair for me to compare the Monstroid to the Battle Bones. Battle Bones is close to a hundred more pieces, but look how much “more” it is. I am fond of the face on the Battle Bones…I mean, I guess the head is one of its main features. And then I have the emotional attachment to it also. Also, I paid three times as much for Battle Bones…(San Diego Comic Con exclusive.)

So here is the Wind Raider. I could just compare the Talon Fighter just as well, I suppose. The Monstroid was $30, while the Wind Raider was $20. Both have great action features. The Monstroid doesn’t have a good place to seat a figure, though, except in the claws. So the Wind Raider winds that one. But then, the character is artificial intelligence, I suppose…(Notice, I had some more fun with Roboto!)

So how do I rate this set?

I want to be unbiased here…Like I said, Monstroid wasn’t much a part of my childhood. On the other hand, getting Hordak was outstanding, and the future looks bright for Princess of Power toys in this Mega Construx line. On the other hand, the Prince Adam here seems to be a misguided choice. I am an on-card collector, but I guess Prince Adam in blue clothes might not sell that well as an individual. The Monstroid’s mechanical problem was my error, so I won’t count off on that.

I don’t feel like this is a solid five points. Four points easily. Monstroid is reasonably cool, except for the face. I kind of wish the crab claws had springs that would really make the hands pinch though. We get Hordak and She-Ra. Prince Adam is OK with the Alcala sword. It took me an hour and a half to build, but I was mildly interrupted a few times, and I also took pictures as I went. And like the Slime Pit, I feel it should be bigger.

So I am going for 4/5. Do you agree or disagree, Hub City Geeks? Let me know in the comments. I also would like to know about your experiences with the Monstroid as a child, because I missed out evidently, and none of my friends seemed to have this either.